To:
vortex-l@eskimo.com Sent: Sun, March 21, 2010 2:51:23 PM Subject:
Re: [Vo]:circuit diagram
Harry will need to confirm this, but I believe the diagram in
question
is
only for the input side. The output side, which isn't shown,
consists of a pickup coil, some related circuitry
AM
Subject: Re: [Vo]:circuit diagram
What do you mean, the inductor (10 turns of wire on a core)
is
connected between the positive end of the supply and one end of
the
switch (drain of the MOSFET) isn't it?
2010/3/20 Harry Veeder
href=mailto:hlvee...@yahoo.com;hlvee...@yahoo.com
@eskimo.com
Sent: Sat, March 20, 2010 3:59:08 AM
Subject: Re: [Vo]:circuit diagram
What do you mean, the inductor (10 turns of wire on a core)
is
connected between the positive end of the supply and one end of
the
switch (drain of the MOSFET) isn't it?
2010/3/20 Harry Veeder
href
Harry will need to confirm this, but I believe the diagram in question
is only for the input side. The output side, which isn't shown,
consists of a pickup coil, some related circuitry, and the
aforementioned capacitors.
If I'm wrong, then I'm confused (no great surprise there).
On 03/21/2010
To: vortex-l@eskimo.com
Sent: Sun, March 21, 2010 2:51:23 PM
Subject: Re: [Vo]:circuit diagram
Harry will need to confirm this, but I believe the diagram in question
is
only for the input side. The output side, which isn't
shown,
consists of a pickup coil, some related circuitry
03/21/2010 11:56 AM, Michel Jullian
wrote:
Wait a minute, I see
no cap attached to the output on Harry's
diagram
photo
2discussed here (haven't followed the other
discussions), only
one capacitor on the input side, in parallel with the
battery
until
the latter is
if it is possible to close the loop and
generate OU.
He tried in test 10 but didn't succeed:
http://www.youtube.com/watch?v=c7CsBr7ouPE
harry
- Original Message
From: Stephen A. Lawrence sa...@pobox.com
To: vortex-l@eskimo.com
Sent: Sun, March 21, 2010 2:51:23 PM
Subject: Re: [Vo
:51:23 PM Subject:
Re: [Vo]:circuit diagram
Harry will need to confirm this, but I believe the diagram in
question
is
only for the input side. The output side, which isn't shown,
consists of a pickup coil, some related circuitry, and
the
aforementioned capacitors.
If I'm wrong, then I'm
, but I suppose that doesn't matter either?
harry
- Original Message
From: Michel Jullian michelj...@gmail.com
To: vortex-l@eskimo.com
Sent: Fri, March 19, 2010 1:42:52 PM
Subject: Re: [Vo]:circuit diagram
The capacitor on your photo 2 is in parallel with the battery so it's
yes.
You are aware that the the voltage keeps rises even after the battery is
disconnected.
harry
- Original Message
From: Michel Jullian michelj...@gmail.com
To: vortex-l@eskimo.com
Sent: Sat, March 20, 2010 3:59:08 AM
Subject: Re: [Vo]:circuit diagram
What do you mean
- Original Message
From: Harry Veeder hlvee...@yahoo.com
To: vortex-l@eskimo.com
Sent: Thu, March 18, 2010 10:46:19 PM
Subject: Re: [Vo]:circuit diagram
Ok, I gave him the wiki reference.
Harry
- Original
Message
From: Michel Jullian
ymailto=mailto:michelj...@gmail.com;
href
Jullian michelj...@gmail.com
To: vortex-l@eskimo.com
Sent: Fri, March 19, 2010 4:54:02 AM
Subject: Re: [Vo]:circuit diagram
2010/3/19 Harry Veeder
href=mailto:hlvee...@yahoo.com;hlvee...@yahoo.com:
Here is a
reply from Magluvin who is also a member of overunity.com:
This is not
a boost
2:
http://tinyurl.com/ycw4xm4
with operating principles
http://en.wikipedia.org/wiki/Boost_converter
Harry
- Original Message
From: Michel Jullian michelj...@gmail.com
To: vortex-l@eskimo.com
Sent: Fri, March 19, 2010 4:54:02 AM
Subject: Re: [Vo]:circuit diagram
2010/3/19
ymailto=mailto:michelj...@gmail.com;
href=mailto:michelj...@gmail.com;michelj...@gmail.com
To:
href=mailto:vortex-l@eskimo.com;vortex-l@eskimo.com
Sent: Fri,
March 19, 2010 4:54:02 AM
Subject: Re: [Vo]:circuit
diagram
2010/3/19 Harry Veeder
href=mailto:
href=mailto:hlvee...@yahoo.com
BTW I think you may need to be signed into facebook to see this image.
(At any rate, I couldn't see it until I signed in.)
On 03/18/2010 12:15 PM, Harry Veeder wrote:
http://www.facebook.com/photo.php?pid=3513566l=e812a3f42eid=676517267
http://tinyurl.com/yewd4sf
Harry
So what we've got here is a toroidal coil with a neo magnet outside it.
The neo magnet, by saturating /part/ of the ferrite core, essentially
cuts the toroid, so it's no longer going to be a closed system; when
we put a current through the coil, we're going to see a chunk of its
field leaking out
the problem is.
- Original Message
From: Stephen A. Lawrence sa...@pobox.com
To: vortex-l@eskimo.com
Sent: Thu, March 18, 2010 1:03:38 PM
Subject: Re: [Vo]:circuit diagram
BTW I think you may need to be signed into facebook to see this image.
(At
any rate, I couldn't see it until I
by the external neo magnets.
- Original Message
From: Stephen A. Lawrence sa...@pobox.com To:
vortex-l@eskimo.com Sent: Thu, March 18, 2010 1:03:38 PM Subject:
Re: [Vo]:circuit diagram
BTW I think you may need to be signed into facebook to see this
image.
(At
any rate, I
On Mar 18, 2010, at 12:56 PM, Stephen A. Lawrence wrote:
By the way, I should say Thanks! for taking the time to post all
these
here. It's interesting, even if I don't believe for a minute that
it's OU.
I agree with all the above. Thanks to Harry Veeder.
Best regards,
Horace Heffner
Stephen A. Lawrence wrote:
By the way, I should say Thanks! for taking the time to post all these
here. It's interesting, even if I don't believe for a minute that it's OU.
Someone should communicate the gist of the comments here to the
author of the video. Tell him to invest in an ammeter,
- Original Message
From: Jed Rothwell jedrothw...@gmail.com
To: vortex-l@eskimo.com; vortex-l@eskimo.com
Sent: Thu, March 18, 2010 5:22:20 PM
Subject: Re: [Vo]:circuit diagram
Stephen A. Lawrence wrote:
By the way, I should say Thanks! for
taking the time to post all
@eskimo.com
Sent: Thu, March 18, 2010 5:22:20 PM
Subject: Re: [Vo]:circuit diagram
Stephen A. Lawrence wrote:
By the way, I should say Thanks! for
taking the time to post all these
here. It's interesting, even if I
don't believe for a minute that it's OU.
Someone should communicate the
gist
On 03/18/2010 05:58 PM, Harry Veeder wrote:
- Original Message
From: Jed Rothwell jedrothw...@gmail.com To: vortex-l@eskimo.com;
vortex-l@eskimo.com Sent: Thu, March 18, 2010 5:22:20 PM Subject:
Re: [Vo]:circuit diagram
Stephen A. Lawrence wrote:
By the way, I should
Ok, I gave him the wiki reference.
Harry
- Original Message
From: Michel Jullian michelj...@gmail.com
To: vortex-l@eskimo.com
Sent: Thu, March 18, 2010 7:34:49 PM
Subject: Re: [Vo]:circuit diagram
Nothing mysterious about this circuit, it's a silly boost converter
without
From: Harry Veeder hlvee...@yahoo.com
To: vortex-l@eskimo.com
Sent: Thu, March 18, 2010 10:46:19 PM
Subject: Re: [Vo]:circuit diagram
Ok, I gave him the wiki reference.
Harry
- Original
Message
From: Michel Jullian
ymailto=mailto:michelj...@gmail.com;
href=mailto:michelj
25 matches
Mail list logo
