Re: [weewx-user] Reinstalling weewx

I have a Pi4 with external SSD and I did exactly what Tom has suggested without any problems. I have done this every time I have had a new hardware config to ensure all is well. Nev On Monday, February 26, 2024 at 1:02:08 AM UTC+10 Tom Keffer wrote: > Move a temporary database into position,

Re: [weewx-user] Re: import weewx data from mqtt to home assistant.

Hi Note State Topic in all items is “weather/loop” Note this is json data you need to look for the required data in that stream. Just read more closely Neville On Sunday, February 11, 2024 at 7:32:25 AM UTC+10 Neville Davis wrote: > Hi > > In addition in settings search MQTT

Re: [weewx-user] Re: import weewx data from mqtt to home assistant.

MQTT On Sunday, February 11, 2024 at 7:27:07 AM UTC+10 Neville Davis wrote: > Hi > > On my Pi4 I have data from weewx and data from my solar and power/water > consumption monitoring system combined to a single MQTT stream and this is > used within HAAS. > > I also had s

Re: [weewx-user] Re: import weewx data from mqtt to home assistant.

Hi On my Pi4 I have data from weewx and data from my solar and power/water consumption monitoring system combined to a single MQTT stream and this is used within HAAS. I also had some issues but I have included here my relevant part of my config yaml.Note the MQTT section hope this

[weewx-user] Station repaired

Hi I have finally repaired most of my install and new info included in my weewx Wiki page for a station with i2C sensors. Still more work to be done but here is a link to my station. https://bit.ly/44v9302 Nev -- You received this message because you are subscribed to the Google Groups

[weewx-user] A fix for mosquito access outside of local machine

Hi I have started to update my files in my i2C sensor config and have included a link to that folder below. Just incase no-one has seen the fix for some issues with mosquito access outside of your local machine I have included that in the first parts of my update. This link will contain

[weewx-user] Water proof DFRobot SHT3X sensor

Hi all I had a failure of my external SHT31-D sensor and have now installed a supposed waterproof sensor in my FARS. I have included a link to a folder containing the python scripts required in my i2C hardware post in weewx wiki

Re: [weewx-user] Re: weewx-wdc Skin v3.0.0 available

Hi I have used the scripts developed by Darryn Capes-Davis for his responsive skin. I edited this originally to create a single page I could add to any skin..I have had it on a couple. It has proved to be very reliable . Neville On Saturday, March 11, 2023 at 6:33:03 AM UTC+10 Neville Davis

Re: [weewx-user] Re: weewx-wdc Skin v3.0.0 available

Hi The i2C sensor Australian BOM info is mine. I have edited the Belchertown skin to include a page with this data…it has worked really well. Currently my system is not updating due to hardware problems. There’s maybe something you can use, I have I think included all the edits required to get

Re: [weewx-user] Re: Using Multiple MySQL databases

Hi Yes I use SQL replication to a spare Raspberry pi, its is a live backup and I also use it as a second source of data in another weewx project I am building. I have used replication for years (on QNAP NAS and now Pi), and it is extremely reliable and recovers from power failures, device

Re: [weewx-user] formatting of current.inc

gt; $gettext("Power Consumed today")> >> $day.powerconsumed.sum.format("%.2f") >> >> >> >> #else >> >> >> >> $obs.label[$x] >> >> $getVar('current.' + $x) >> >>

Re: [weewx-user] formatting of current.inc

e section Assigning a unit group > <http://www.weewx.com/docs/customizing.htm#Assigning_a_unit_group> in the > Customizing Guide*.* > > On Thu, Aug 11, 2022 at 6:50 PM Neville Davis > wrote: > >> >> I have data being stored in watt Hrs in the db and have a dai

Re: [weewx-user] formatting of current.inc

gt; > As for your second question, see the section Assigning a unit group > <http://www.weewx.com/docs/customizing.htm#Assigning_a_unit_group> in the > Customizing Guide*.* > > On Thu, Aug 11, 2022 at 6:50 PM Neville Davis > wrote: > >> >> I have data being stored

Re: [weewx-user] formatting of current.inc

I have added my new observation to the group and my data now displays with units correctly that is "16622.49 Wh"...and the daily sum is correct. It still positions itself at the top of the current.inc widget. Neville On Friday, August 12, 2022 at 12:27:21 PM UTC+10 Neville Davis wr

Re: [weewx-user] formatting of current.inc

on, see the section Assigning a unit group > <http://www.weewx.com/docs/customizing.htm#Assigning_a_unit_group> in the > Customizing Guide*.* > > On Thu, Aug 11, 2022 at 6:50 PM Neville Davis > wrote: > >> >> I have data being stored in watt Hrs in the db and have a daily

[weewx-user] Re: weewx wiki

Hi had a quick check some of the links not https are being blockedI renamed the wind direction file created a new link now https, worked for me. The other ones I will check when I have time. Neville On Tuesday, May 3, 2022 at 7:33:56 AM UTC+10 Neville Davis wrote: > Hi > Just had a

[weewx-user] Re: weewx wiki

Hi Just had a quick check also blocked for me, a couple of the others seem to be incorrectly linked?? Not sure I will get to it today but will correct as soon as possible. Neville On Monday, May 2, 2022 at 9:01:42 AM UTC+10 Jim Munro wrote: > Some diagrams on Raspberry Pi weather station

[weewx-user] Lots of rain Brisbane Aus

For interest we have had a considerable amount of rain over the past week...several areas around us had in excess of 1000 (thousand)mm over a couple of days. My local station had the following [image: Screen Shot 2022-03-03 at 3.18.41 pm.png] The bucket tips gave a max of 68mm/hr at one stage.

[weewx-user] Re: Version 4.7.0

Just updated my Pi to 4.7.0 from 4.5.1 with Belchertown skin 1.2 (with my extra pages and Aus BOM forecasts) without any hassles, all looks good so far Nev On Wednesday, March 2, 2022 at 4:06:20 PM UTC+10 jerry...@gmail.com wrote: > Just upgraded my macOS and FreeBSD weather stations to 4.7

Re: [weewx-user] Re: Problem with the Wiki

Seen this for some time, been hopping it would correct. Link to my hardware page (i2C sensors) keeps going to the home page, I use the the drop down to get to the pages. Not all hardware links have this problem but some do. Neville On Friday, November 12, 2021 at 11:09:31 AM UTC+10

Re: [weewx-user] Re: Aussearch error accessing the BOM

Cheers > > Darryn > > -- > *From:* weewx...@googlegroups.com on behalf > of Neville Davis > *Sent:* Sunday, May 30, 2021 8:43:18 AM > *To:* weewx-user > *Subject:* [weewx-user] Re: Aussearch error accessing the BOM > > Darryn > > new aussear

[weewx-user] Re: Aussearch error accessing the BOM

8:30:24 raspberrypi weewx[700] ERROR weewx.reportengine: [Previous line repeated 491 more times] May 30 08:30:24 raspberrypi weewx[700] ERROR weewx.reportengine: RecursionError: maximum recursion depth exceeded May 30 08:30:24 raspberrypi weewx[700] ERROR weewx.repo

[weewx-user] Re: Aussearch error accessing the BOM

Yes happening to me as well… started on Thursday,,,my normal fix of getting the /var/lib/weewx/aussearch reloaded not working…I will check the repo Thanks Darryn On Saturday, May 29, 2021 at 10:05:50 PM UTC+10 Darryn Capes-Davis wrote: > Hi Susan, > > See the GitHub repo for update

Re: [weewx-user] Re: Version 4.5.0 released

I am not using Aeris I use Darksky and Australian met office data, with modified Belchertown skin. So not seeing your problem. Neville On Sunday, April 4, 2021 at 10:25:50 PM UTC+10 t...@tom.org wrote: > Interesting that Belchertown 1.2 is working for you. Everything works > great on 4.4.0

Re: [weewx-user] Re: Version 4.5.0 released

I will also add my weewx.conf shows 4.5.1 Neville On Sunday, April 4, 2021 at 1:44:31 PM UTC+10 Neville Davis wrote: > Hi > Just updated my system to 4.5.1 without problems. > For information also running Belchertown skin v 1.2 python 3 with OWFS > rain bucket.. all good

Re: [weewx-user] Re: Version 4.5.0 released

Hi Just updated my system to 4.5.1 without problems. For information also running Belchertown skin v 1.2 python 3 with OWFS rain bucket.. all good Neville On Sunday, April 4, 2021 at 12:19:58 PM UTC+10 mksm...@gmail.com wrote: > I am sure about this finding > when using "sudo nano

[weewx-user] Belchertown Australian forecast

I have updated my post in the weewx Wiki https://github.com/weewx/weewx/wiki/Raspberry-Pi-weather-station-with-i2C-sensors with a link to the mods done to include The Australian localised weather forecast, and also a colour history chart I don't think I left anything out :) Neville -- You

Re: [weewx-user] Belchertown skin with Australian BOM forecasts

s > > Tim > > On 23/2/21 10:30 am, Neville Davis wrote: > > I have updated my weather station link in the weewx Wiki ( i2C weather > > station) to include the local Australian weather > > forecast. https://bit.ly/2A8BbOx > > I have also included the col

[weewx-user] Belchertown skin with Australian BOM forecasts

I have updated my weather station link in the weewx Wiki ( i2C weather station) to include the local Australian weather forecast. https://bit.ly/2A8BbOx I have also included the colourful history chart by Nick Dajda. The forecast data is gathered by the script by Darryn Capes-Davis. Neville

[weewx-user] Belchertown skin with colour history chart and local Australian weather forecast

I have updated my link in my information on the weewx Wiki (i2C weather station) to my latest weather page. https://bit.ly/2A8BbOx I have edited and incorporated scripts by Darryn Capes-Davis and Nick Dajda into the Belchertown skin. Still been quite slack in getting my installation files and

[weewx-user] Belchertown skin with local Australian weather forecast

I have updated my weather station link in my weewx Wiki entry (pi weather station with i2C sensors). The link https://bit.ly/2A8BbOx now is able to display the local forecast data from our Gov website using the script developed by Darryn Capes-Davis for his responsive skin, also the history

[weewx-user] Belchertown skin with local Australian forecast

This is a link to my current weather site. http://nevsweather.duckdns.org:8048/weather/belchertown/index.html I have updated my link to this site on my weewx Wiki page entry (pi weather with i2C sensors). The skin now has two extra pages, one for a colour history chart (code by Nick Dajda used

[weewx-user] Re: test

That seems to be it... not sure what happened. On Tuesday, February 23, 2021 at 9:41:41 AM UTC+10 Neville Davis wrote: > I seemed to be unable to post, found not linked to my google account.. > this is to see if this works. > > Neville > -- You received this message because you

[weewx-user] test

I seemed to be unable to post, found not linked to my google account.. this is to see if this works. Neville -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to

[weewx-user] rainRate problems

The other day I reported problems that just seemed to go away...then I saw this [image: Screen Shot 2021-02-01 at 10.10.04 am.png] At this point because it was sunny and I was not under water with rain at 47Mtrs/hr + I figured I had a problem...so went looking at the db and hardware. Db showed

[weewx-user] Re: Version 4.4.0

I am also now at 4.4.0 and Belchertown 1.2... everything working fine.. Thanks very much On Sunday, January 31, 2021 at 10:04:09 AM UTC+10 tke...@gmail.com wrote: > My apologies to user 'edi-x', who was the true author of PR #631 > . > > Thanks to user

Re: [weewx-user] Re: Rain Rate Calc Problem?

of decades ago :) . Neville On Wednesday, January 20, 2021 at 11:01:02 AM UTC+10 Neville Davis wrote: > I don't have any rain calculations or gathering in my script for > PiWeather...just looks at the other sensors NOT rain. > I am currently going through a test and with only Sea

Re: [weewx-user] Re: Rain Rate Calc Problem?

Which one is it? > > On Tue, Jan 19, 2021 at 2:10 PM Neville Davis > wrote: > >> Hi just revisited my weewx.conf I believe I only have one driver >> PiWeather, the OWFS is configured as a service as per the instructions in >> owfs.py.. >> >&

Re: [weewx-user] Re: Rain Rate Calc Problem?

skins and use just the Standard skin to ensure there is nothing happening there. Neville On Wednesday, January 20, 2021 at 6:45:51 AM UTC+10 Neville Davis wrote: > Hi > I have been using this configuration for several years..The overall > hardware design is my own...I am a hardware

Re: [weewx-user] Re: Rain Rate Calc Problem?

le driver in use, then a rate event, then the > database. There are too many moving parts to unravel what is happening with > your configuration. > > On Mon, Jan 18, 2021 at 6:37 PM Neville Davis > wrote: > >> Hi using >> SELECT dateTime,rain,rainRate >> F

Re: [weewx-user] Re: Rain Rate Calc Problem?

Hi using SELECT dateTime,rain,rainRate FROMarchive WHERE rain>0 order by dateTime desc limit 200; the last 200 records for rain On Tuesday, January 19, 2021 at 12:31:55 PM UTC+10 Neville Davis wrote: > Hi > > Using sequel pro > > SELECT dateTime,rain,rainRate > FR

Re: [weewx-user] Re: Rain Rate Calc Problem?

Hi Using sequel pro SELECT dateTime,rain,rainRate FROMarchive WHERE rainRate>0 order by dateTime desc limit 50; On Tuesday, January 19, 2021 at 11:55:55 AM UTC+10 Neville Davis wrote: > Hi > installed sqlite3 but when run I get nothing printed. the same query with > rai

Re: [weewx-user] Re: Rain Rate Calc Problem?

> sqlite> *select > dateTime,datetime(dateTime,'unixepoch','localtime'),rain,rainRate from > archive where rainRate>0 order by dateTime desc limit 50;* > sqlite> *.quit* > > This will print the last 50 non-zero rainRates. > > -tk > > > On Mon, Jan 18, 2021 at 3:

[weewx-user] Re: Belchertown AerisWeather link to PWS weather problem

not link PWS and aerisweasther Neville On Thursday, January 7, 2021 at 11:41:04 AM UTC+10 Neville Davis wrote: > I have data going to PWS weather from weewx and my station is recorded as > active on their website. > For about a month I have been trying to link my PWS data to AerisWeather > t

[weewx-user] Belchertown AerisWeather link to PWS weather problem

I have data going to PWS weather from weewx and my station is recorded as active on their website. For about a month I have been trying to link my PWS data to AerisWeather to get forecast data but it keeps reporting "something is going wrong try again". I am now on weewx 4.3 and Belchertown

Re: [weewx-user] Re: belchertown question

Thanks for that info, just tried again, still the sameI'm blaming covid :) Neville On Monday, December 21, 2020 at 1:51:05 AM UTC+10 sali...@gmail.com wrote: > hello Neville > > Me, I was waiting for " 7 days " after inscription. > > Patrick from France > Le

[weewx-user] Re: belchertown question

Pat I am about to go to 1.2, have configured weewx and pwsweather receiving data and my station is now considered active and appears on the main map. I am now attempting to link AerisWeather and pwsweather but the create Aerisweather contributor account page will not do the link..it keeps

[weewx-user] Re: Belchertown skin 1.1 RainWithRainRate in cm not mm

Now have had some good rain, display is now in mm. Thanks Arend Neville On Sunday, October 25, 2020 at 10:25:43 PM UTC+10 Neville Davis wrote: > OK found my site had crashed, edited as suggested, after a light shower of > rain the data looks good so far. > > > Thanks > &

[weewx-user] Re: Belchertown skin 1.1 RainWithRainRate in cm not mm

OK found my site had crashed, edited as suggested, after a light shower of rain the data looks good so far. Thanks Nev On Sunday, October 25, 2020 at 9:23:48 PM UTC+10 Neville Davis wrote: > Thanks I will try this edit. > > Nev > > On Sunday, October 25, 2020 at 8:01:05 PM UTC

[weewx-user] Re: Belchertown skin 1.1 RainWithRainRate in cm not mm

Thanks I will try this edit. Nev On Sunday, October 25, 2020 at 8:01:05 PM UTC+10 Arend wrote: > I can not connect to you MQTT broker, but noticed that you are using km/h > for windspeed. In that case I think you should stick to METRIC for > unit_system and make these changes to MQTT section:

[weewx-user] Re: Belchertown skin 1.1 RainWithRainRate in cm not mm

Thanks I will try that, my web site http://nevsweather.duckdns.org:8048/weather/belchertown/index.html We are expecting a lot more rain this week so will be a good opportunity to get this fixed :). Regards Neville On Sunday, October 25, 2020 at 6:00:43 AM UTC+10 Arend wrote: > Hi Nev, > >

[weewx-user] Belchertown skin 1.1 RainWithRainRate in cm not mm

Hi We have had rain for the first time in many months, we had about 20mm in about 30 mins...total daily rain is correct, but because of the intensity of the rain I had the station observation rain with rain rate displaying cm values not mm values, i.e 1.9 instead of 19mm and 3.5 instead of 35

[weewx-user] Re: Move to Python 3?

Read this https://linuxconfig.org/how-to-change-from-default-to-alternative-python-version-on-debian-linux if you use the alternative option it is system-wide. This is the procedure I followed. But is it needed..I did it just to be current it only caused minor problems for me but no issues

[weewx-user] Re: Move to Python 3?

When I recently built up a new Pi3 system I defaulted to python3 so that any call to just python uses python3. This removed any confusion :). The issue I had with this was that some python testing scripts I used for my home brew weather station had a number of syntax (primarily printing)

[weewx-user] Re: weewx v4.1 sql db will not rebuild daily

Well I am operational again...but running on 4.0. Managed to get my backup data installed and rebuilt daily...Going to let it run for a few days, to make sure it’s stable. Going to look at logs to see if anything stands out... Neville On Wednesday, June 3, 2020 at 7:01:10 AM UTC+10, Neville

[weewx-user] Re: weewx v4.1 sql db will not rebuild daily

OK here it is Last login: Tue Jun 2 23:32:02 2020 from 192.168.0.54 *pi@raspberrypi*:*~ $* cd /home/weewx/bin *pi@raspberrypi*:*/home/weewx/bin $* ./wee_database /home/weewx/weewx.conf --drop-daily Using configuration file /home/weewx/weewx.conf Using database binding 'wx_binding', which is

[weewx-user] Re: weewx v4.1 sql db will not rebuild daily

Yes these are the exact commandsI use the same as I have used many times before. As the issue happened several times I deleted all databases I had in MySQL, created new dB called weewx and imported my backup. This procedure I used as part of my rebuild of system on other occasions. The backupI

[weewx-user] Re: weewx v4.1 sql db will not rebuild daily

) All the tables seem to be correctly generated with no content. Neville On Tuesday, June 2, 2020 at 11:45:59 PM UTC+10, Neville Davis wrote: > > yes unfortunately several times. > > I have the sql backup on the mac desktop...I have just dropped the db > again and created anothe

[weewx-user] Re: weewx v4.1 sql db will not rebuild daily

yes unfortunately several times. I have the sql backup on the mac desktop...I have just dropped the db again and created another weewx db from the pi and just started to import about 300Meg of data in archive. Just reported finished this time I will just fire up weewx and see what happens

[weewx-user] weewx v4.1 sql db will not rebuild daily

Guys I had quite an issue but luckily I had backed up about 6 hrs before my dramaNow I find that when I attempt to rebuild dailies from the backup it creates the tables then says the following and exits. This last attempt was after shutdown and reboot. This happened several times so I

[weewx-user] Re: Belchertown v1.1 with weewx 4.1.0 on Pi3 8day forecast date format

gt;> the options within skin.conf >> >> On Monday, June 1, 2020 at 7:39:38 AM UTC-4, Neville Davis wrote: >>> >>> I have tried weewx.conf belchertown_locale = “en_AU.UTF-8” and also set >>> to “auto” neither corrected the date configuration of the forecast elemen

[weewx-user] Re: Belchertown v1.1 with weewx 4.1.0 on Pi3 8day forecast date format

I have tried weewx.conf belchertown_locale = “en_AU.UTF-8” and also set to “auto” neither corrected the date configuration of the forecast elements. On Monday, June 1, 2020 at 5:05:23 PM UTC+10, Neville Davis wrote: > > My Pi3 has local setup for Australia the only date issue

[weewx-user] Belchertown v1.1 with weewx 4.1.0 on Pi3 8day forecast date format

My Pi3 has local setup for Australia the only date issue I have is with the Darksky forecast headed with for example 6/1 instead of our 1/6 . All other dates seem OK. In the index template we just load forecast I can see no where I can configure it. The main header for this section is 8 Day

Re: [weewx-user] V4 with python2 OWFS errors

Just reread are you looking for my sensor data collection file (it collects the data from my i2C BMP085) this is done as a service, it gets all my data creates a csv file in ram which I then read with the piweather Driver in weewx. On my new install (from scratch) Adafruit_Python_BMP,

Re: [weewx-user] V4 with python2 OWFS errors

Don’t know, never thought of it. I included it with another post the other day, but since then modified because it would not work with new install. Which I have now gone to weewx v4.1 as well and all OK. I will experiment and let you know... Nev On Thursday, May 28, 2020 at 4:54:37 PM UTC+10,

Re: [weewx-user] V4 with python2 OWFS errors

of water falling in one loop cycle :) Now I just need to get my old skins working under python3.. regards Neville On Wednesday, May 27, 2020 at 8:15:07 PM UTC+10, Neville Davis wrote: > > Thanks very much Glen I will do the mods in the morning. > I had specified a sensor type in my o

Re: [weewx-user] V4 with python2 OWFS errors

thinking you only want the Service side of it, that way > it supplements your main stations data. > > If that assumption is correct, remove the "driver = user.owfs " line > from the [OWFS] section. Leave the [Engine][[Services]] data_services > = user.owfs.OWFSService as it is >

Re: [weewx-user] V4 with python2 OWFS errors

system/owserver.service.d/override.conf > [Service] > User=Debian-ow > Group=Debian-ow > ExecStart= > ExecStart=/usr/bin/owserver -c /etc/owfs.conf --foreground > > [Install] > Also= > > For context, read the full post at the above link. > > I'll add...

Re: [weewx-user] V4 with python2 OWFS errors

Guys I too have been following, I am now running pythonv3 weewxv4 with 1wire rain, my solution is different and messy but seems to work for me, But while trying to sort out my problem found a report about problems with owserver on Pi using bustergithub miccoli in the config file edit

[weewx-user] Re: upgrade from 3.9.1 to 4 failed

Actually I will run my getrain.py as a service so all I will need to do is access the ramdisk. Nev On Monday, May 25, 2020 at 3:58:17 PM UTC+10, Neville Davis wrote: > > I have managed to hack owget.py to output directly to a csv file I create > in a ramdisk...and I get this by not

[weewx-user] Re: upgrade from 3.9.1 to 4 failed

characters I will have to mask...so getting there :) Neville On Monday, May 25, 2020 at 11:37:59 AM UTC+10, Neville Davis wrote: > > I have almost everything working in version 4, all my i2C modules are > detected wind sensors air-conditioning data etc all except my 1wire rain

[weewx-user] Re: upgrade from 3.9.1 to 4 failed

it further from there. I have been looking at subprocess but I am way over my head and any guidance would be appreciated. Neville On Thursday, May 21, 2020 at 6:32:25 PM UTC+10, Neville Davis wrote: > > Thanks very much Gary > > Nev > > On Thursday, May 21, 2020 at 5:45:16 PM U

[weewx-user] Re: upgrade from 3.9.1 to 4 failed

(nominally /var/log/syslog) > in that terminal with something like tail -f -n50 /var/log/syslog and > take copies as required or edit and copy from the log file. that way you > can get a longer log extract not the 'looking through a straw' view that > systemctl gives you. > > Gary > > On T

[weewx-user] Re: upgrade from 3.9.1 to 4 failed

im Nev On Thursday, May 21, 2020 at 2:51:39 PM UTC+10, Neville Davis wrote: > > the following from setup and status > > copying util/import/cumulus-example.conf -> /home/weewx/util/import > > copying util/launchd/com.weewx.weewxd.plist -> /home/weewx/util/launchd > >

[weewx-user] Re: upgrade from 3.9.1 to 4 failed

return On Thursday, May 21, 2020 at 2:51:39 PM UTC+10, Neville Davis wrote: > > the following from setup and status > > copying util/import/cumulus-example.conf -> /home/weewx/util/import > > copying util/launchd/com.weewx.weewxd.plist -> /home/weewx/util

[weewx-user] Re: upgrade from 3.9.1 to 4 failed

Ok I will look into it I have had the system running for a few years the last software update was to 3.9.1 when it came out...Its been some time since I visited my software about time i did it again. Thanks for the info. Nev On Thursday, May 21, 2020 at 2:51:39 PM UTC+10, Neville Davis wrote

[weewx-user] Re: upgrade from 3.9.1 to 4 failed

n full. *pi@raspberrypi*:*~ $* Any ideas ? Nev On Thursday, May 21, 2020 at 2:51:39 PM UTC+10, Neville Davis wrote: > > the following from setup and status > > copying util/import/cumulus-example.conf -> /home/weewx/util/import > > copying util/launchd/com.weewx.weewxd.

[weewx-user] Re: upgrade from 3.9.1 to 4 failed

Thanks will look at it straight away Nev On Thursday, May 21, 2020 at 2:51:39 PM UTC+10, Neville Davis wrote: > > the following from setup and status > > copying util/import/cumulus-example.conf -> /home/weewx/util/import > > copying util/launchd/com.weewx.weewxd.plis

[weewx-user] upgrade from 3.9.1 to 4 failed

the following from setup and status copying util/import/cumulus-example.conf -> /home/weewx/util/import copying util/launchd/com.weewx.weewxd.plist -> /home/weewx/util/launchd creating /home/weewx/util/default copying util/default/weewx -> /home/weewx/util/default running install_egg_info

[weewx-user] Re: Simultaneous clone to mySQL for weewx and weewx-WD?

Yes I for one use to just dump and save but when I decided to use mySql I also decided to use replication, which I set up on a QNAP NAS... it has worked without fault as a realtime backup of the db on my pi. Nev On Tuesday, January 2, 2018 at 9:05:08 AM UTC+10, vince wrote: > > On Monday,

Re: [weewx-user] Re: Air quality sensors?

I have just read through this post, if I have it right you have a device that has json in a web page and you wish to import this data into weewx. I had a similar situation with my air conditioner that also had data in json on my local lan...and wanted to get it into weewx...Is the aircon was

[weewx-user] Re: Adding data from homemade wireless sensors to weewx

On Wednesday, June 21, 2017 at 8:05:12 AM UTC+10, Neville Davis wrote: > > In getting the data into weewx.I have a number of different sensors > i2C one wire and data from a web sever (json) from my Airconditioner...all > being input to weewx. > > My basic method is to

[weewx-user] Re: Adding data from homemade wireless sensors to weewx

In getting the data into weewx.I have a number of different sensors i2C one wire and data from a web sever (json) from my Airconditioner...all being input to weewx. My basic method is to get data as a csv file by running scripts from boot ( i have 3 of these files being generated in a

[weewx-user] Australian BOM dew point discussion

Thought the group might like this... http://media.bom.gov.au/social/blog/1324/feeling-hot-and-bothered-its-not-the-humidity-its-the-dew-point/?cid=003fb34 -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop

[weewx-user] Re: Version 3.7.1

Installed fine (setup.py), no problems with replication MySQL (earlier discussion and mod to Pi MySQL config) Nev On Friday, March 24, 2017 at 1:02:28 AM UTC+10, Tom Keffer wrote: > > This version has fixes for some minor problems in V3.7.0. Find it in the > usual places. > > -tk > > CHANGE

Re: [weewx-user] Re: 3.7.0 with MySQL quitting with database error

, Neville Davis wrote: > > I also use replication and am wondering if the issues mentioned here have > been resolved? > > My logging is mixed. > > I am on weewx 3.6.2 Pi3 and replicate to a QNAP NAS > > -- You received this message because you are subscribed to the Google

Re: [weewx-user] Re: 3.7.0 with MySQL quitting with database error

I also use replication and am wondering if the issues mentioned here have been resolved? My logging is mixed. I am on weewx 3.6.2 Pi3 and replicate to a QNAP NAS -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group

[weewx-user] RTC vs NTP on Raspberry Pi 3

I use an RTC on my Pi's (Pi 2and Pi 3) see the weewx wiki and elsewhere for procedures, the weewx wiki has a specific procedure for the Pi3 Neville -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop

Re: [weewx-user] My current weewx page

ry pi + weewx: now with scripts > <https://github.com/glennmckechnie/rorpi-raspberrypi> > > On 4 March 2017 at 13:09, Neville Davis <nevilled...@gmail.com > > wrote: > >> Just finally finished my latest weewx page using the responsive skin by >> Darryn

[weewx-user] My current weewx page

Just finally finished my latest weewx page using the responsive skin by Darryn Capes-Davis. I really like his work on this and have just restyled it as a test and included elements from my older skins. The style is quite different and would be interested in constructive comments :) here is

[weewx-user] Re: parsing from csv file

Also script is in user dir Nev On Friday, March 3, 2017 at 11:10:10 AM UTC+10, Neville Davis wrote: > > Frank also this in weewx.conf > > > #station_type = Simulator > > sta

[weewx-user] Re: parsing from csv file

Neville On Friday, March 3, 2017 at 11:02:36 AM UTC+10, Neville Davis wrote: > > Frank > > I use the following has been faultless for months on Pi3 with data from > i2C and other sensors > > # > #$Revision: 1 $ > #$Author: Nickolas McColl

[weewx-user] Re: parsing from csv file

Frank I use the following has been faultless for months on Pi3 with data from i2C and other sensors # #$Revision: 1 $ #$Author: Nickolas McColl $ #$Date: 2014-08-16 $ #Initial information from above author further edits by Nev Davis #Latest edit 12 Dec 2016 by Nev Davis

[weewx-user] Re: format time in html.tmpl to hr and minutes only

formatting_options> in the > Customization Guide has the details, there is such an example at the 8th > line of the 3rd table. > > Gary > > On Tuesday, 17 January 2017 08:41:31 UTC+10, Neville Davis wrote: >> >> I want to display the maxtime and mintime for some elements in the >&g

[weewx-user] format time in html.tmpl to hr and minutes only

I want to display the maxtime and mintime for some elements in the html.tmpl in hr min format only (leave of the seconds). Other elements still able to display hr min secs. Hoping someone has already done this :) My attempts so far have been remarkably unsuccessful :( Neville -- You