RE: [WISPA] Outdoor Ethernet Splice

[Todd Barber]

You can also fill the end around the o-rings with silicon to eliminate any
place for water to pool if they happen to be mounted vertically.  

Todd Barber
Skylink Broadband Internet
[EMAIL PROTECTED]
970-454-9499

-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of Marlon K. Schafer
Sent: Monday, January 23, 2006 9:41 PM
To: WISPA General List
Subject: Re: [WISPA] Outdoor Ethernet Splice

I always put in 3 or 4 feet of extra cat 5 at the radio end :-P.

That's the same connector as sb uses.  They are nice but make sure they sit 
horrizontal as water will eventually leak past the o-rings etc.

marlon

- Original Message - 
From: "J. Vogel" <[EMAIL PROTECTED]>
To: "WISPA General List" 
Sent: Monday, January 23, 2006 7:53 PM
Subject: Re: [WISPA] Outdoor Ethernet Splice


>I haven't used these, but someone on one of these lists pointed them
> out a while back.
>
> http://www.alliedelec.com/Search/ProductDetail.asp?SKU=565-0107
>
> I am going to order some in one of these days. They look good to me.
>
> John Vogel
>
>
> Mark Nash wrote:
>
>>Anyone have recommendations on products you use for outdoor, weatherproof
>>ethernet splices?
>>
>>Mark Nash
>>Network Engineer
>>UnwiredOnline.Net
>>350 Holly Street
>>Junction City, OR 97448
>>http://www.uwol.net
>>541-998-
>>541-998-5599 fax
>>
>>
>>
>>
>>
>
> -- 
> WISPA Wireless List: wireless@wispa.org
>
> Subscribe/Unsubscribe:
> http://lists.wispa.org/mailman/listinfo/wireless
>
> Archives: http://lists.wispa.org/pipermail/wireless/ 

-- 
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/



-- 
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.1.375 / Virus Database: 267.14.22/238 - Release Date: 1/23/2006



-- 
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/

Re: [WISPA] Outdoor Ethernet Splice

[Marlon K. Schafer]

I always put in 3 or 4 feet of extra cat 5 at the radio end :-P.

That's the same connector as sb uses.  They are nice but make sure they sit 
horrizontal as water will eventually leak past the o-rings etc.


marlon

- Original Message - 
From: "J. Vogel" <[EMAIL PROTECTED]>

To: "WISPA General List" 
Sent: Monday, January 23, 2006 7:53 PM
Subject: Re: [WISPA] Outdoor Ethernet Splice



I haven't used these, but someone on one of these lists pointed them
out a while back.

http://www.alliedelec.com/Search/ProductDetail.asp?SKU=565-0107

I am going to order some in one of these days. They look good to me.

John Vogel


Mark Nash wrote:


Anyone have recommendations on products you use for outdoor, weatherproof
ethernet splices?

Mark Nash
Network Engineer
UnwiredOnline.Net
350 Holly Street
Junction City, OR 97448
http://www.uwol.net
541-998-
541-998-5599 fax







--
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/ 


--
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/

Re: [WISPA] MT W/ OSPF Problem

[Bo Hamilton]

I just wanted to give a public thank you to Butch Evans!  He knew what the problem was.  My source-nat rule was set to all interfaces and needed to be set to the WAN.   Thanks again Butch!!
 
Bo Hamilton
NCOWireless.com 
On 1/23/06, Kurt Fankhauser <[EMAIL PROTECTED]> wrote:


This has nothing to do with OSPF, call me I know what it is.
 

Kurt Fankhauser
WAVELINC
114 S. Walnut St.
Bucyrus, OH 44820
419-562-6405
www.wavelinc.com


 
-Original Message-From: 
[EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] 
On Behalf Of Bo HamiltonSent: Monday, January 23, 2006 10:38 AMTo: WISPA General List
Subject: [WISPA] MT W/ OSPF Problem
 

Hello everyone!  Im using MT W/ OSPF and Im unable to hit certain backhaul radios or computers on my backhaul sub.


 

Example:

 

On a switch (Radio, Ftp Server Web server, MT Router)---(Backhaul 10.10.1.x/24)---Radio->MT router ether1


 

(Same Board)MT Ether2RadioAP--(wireless sub 10.155.2.x/24)Client

 

If im on the client end I cannot reach my internal ftp server or my web server, but I can hit my core router(10.10.1.x) or my Mt router ether1(same sub) at the tower.   So in short, anything plugged into my switch at the NOC besides my core router I can access.  Weird!   


Anyone got an idea

 

Thanks 

 

Bo  

 

 --WISPA Wireless List: 
wireless@wispa.orgSubscribe/Unsubscribe:http://lists.wispa.org/mailman/listinfo/wireless
Archives: http://lists.wispa.org/pipermail/wireless/

-- 
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/

Re: [WISPA] Outdoor Ethernet Splice

[Mark Nash]

Thanks, I just ordered one.  I'll check it out.  If it can be weatherproofed 
and isn't too difficult to deal with it may solve my problem of having 
enough cable as I replace the EtherAnt-Turbo's.


Mark Nash
Network Engineer
UnwiredOnline.Net
350 Holly Street
Junction City, OR 97448
http://www.uwol.net
541-998-
541-998-5599 fax
- Original Message - 
From: "J. Vogel" <[EMAIL PROTECTED]>

To: "WISPA General List" 
Sent: Monday, January 23, 2006 7:53 PM
Subject: Re: [WISPA] Outdoor Ethernet Splice



I haven't used these, but someone on one of these lists pointed them
out a while back.

http://www.alliedelec.com/Search/ProductDetail.asp?SKU=565-0107

I am going to order some in one of these days. They look good to me.

John Vogel


Mark Nash wrote:


Anyone have recommendations on products you use for outdoor, weatherproof
ethernet splices?

Mark Nash
Network Engineer
UnwiredOnline.Net
350 Holly Street
Junction City, OR 97448
http://www.uwol.net
541-998-
541-998-5599 fax







--
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/





--
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/

Re: [WISPA] Outdoor Ethernet Splice

[J. Vogel]

I haven't used these, but someone on one of these lists pointed them
out a while back.

http://www.alliedelec.com/Search/ProductDetail.asp?SKU=565-0107

I am going to order some in one of these days. They look good to me.

John Vogel


Mark Nash wrote:

>Anyone have recommendations on products you use for outdoor, weatherproof
>ethernet splices?
>
>Mark Nash
>Network Engineer
>UnwiredOnline.Net
>350 Holly Street
>Junction City, OR 97448
>http://www.uwol.net
>541-998-
>541-998-5599 fax
>
>
>
>  
>

-- 
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/

RE: [WISPA] Outdoor Ethernet Splice

[Rick Harnish]

I agree with Justin, this is not a splice.  All our attempts at splicing
Ethernet outdoors has resulted in another service call 3-6 months down the
road and a new run of Ethernet.  Its cheaper to run new cable and be done
with it than to splice and pray.  Nothing worse than to have disgruntled
customers over sloppy work.  If you do splice, make sure you use a heavy
duty shrink tube w/glue around a good tape job.  

Rick Harnish
President
OnlyInternet Broadband & Wireless, Inc.
260-827-2482 Office
260-307-4000 Cell
260-918-4340 VoIP
www.oibw.net
[EMAIL PROTECTED]
 
  
 

-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of Justin Wilson
Sent: Monday, January 23, 2006 10:23 PM
To: wireless@wispa.org
Subject: Re: [WISPA] Outdoor Ethernet Splice

This is not an actual splice. It's a bulkhead connector. Save yourself
trouble and just re-run the cable. You will have a much better life, trust
me on this one.

Justin
-- 
Justin S. Wilson <[EMAIL PROTECTED]>
---
MTIN.NET High Speed Wireless
Phone: 765.762.2851
Web  : www.mtin.net
AOLIM: j2sw


> From: <[EMAIL PROTECTED]>
> Reply-To: "wireless@wispa.org" 
> To: "wireless@wispa.org" 
> Subject: Wireless Digest, Vol 11, Issue 38
> 
> To tell you the truth I have been looking at those for months now and
> couldnt decide if it was an actual  "splicer" (which I could use a few
> of) or something you add to an outdoor enclosure for a pass-thru. (of
> which I could use a few)
> 
>   If someone figures it out - - please post :-)


-- 
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/

-- 
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/

Re: [WISPA] Outdoor Ethernet Splice

[Justin Wilson]

This is not an actual splice. It's a bulkhead connector. Save yourself
trouble and just re-run the cable. You will have a much better life, trust
me on this one.

Justin
-- 
Justin S. Wilson <[EMAIL PROTECTED]>
---
MTIN.NET High Speed Wireless
Phone: 765.762.2851
Web  : www.mtin.net
AOLIM: j2sw


> From: <[EMAIL PROTECTED]>
> Reply-To: "wireless@wispa.org" 
> To: "wireless@wispa.org" 
> Subject: Wireless Digest, Vol 11, Issue 38
> 
> To tell you the truth I have been looking at those for months now and
> couldnt decide if it was an actual  "splicer" (which I could use a few
> of) or something you add to an outdoor enclosure for a pass-thru. (of
> which I could use a few)
> 
>   If someone figures it out - - please post :-)


-- 
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/

RE: [WISPA] soldering radio's

[Rick Harnish]

I am officially cancelling this thread. 
Illegal modification of radios is not a topic that needs to be discussed on
WISPA list servs.  I suggest Kurt work directly with Motorola  with his plans
of modification.  If he feels he has a good idea, he should consult with a
patent attorney as well as the FCC.  He may have some good ideas that may
result in a better product, but this is not the place to discuss it.  Anyone
wishing to discuss this more, take it offlist.

 

Thank you,

 



Rick
Harnish

President

OnlyInternet
Broadband & Wireless, Inc.

260-827-2482
Office

260-307-4000
Cell

260-918-4340
VoIP

www.oibw.net

[EMAIL PROTECTED]

 

  

 













From:
[EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Brian Rohrbacher
Sent: Monday, January 23, 2006
9:29 PM
To: WISPA General List
Subject: Re: [WISPA] soldering
radio's



 

Even so, it has to be
built before it can be certified.  
We'll just have to assume that this is for testing and he'll have Moto's and
the FCC's approval before he uses it.  
Because like you said, this is not a place where we talk about breaking the FCC
rules.  
I know I wouldn't want the FCC enforcement team tracking me down.


Steve Stroh wrote: 


The big difference is that Last Mile Gear is MOTOROLA authorized to do 
such modifications, and THEY have had THEIR modifications FCC  certified. 

Stating this question in public is a gigantic invitation for  competitors
to invite the FCC in for a chat and a looksee given the  now-documented
(here on the list) possibility that there are illegally  modified Part-15
gear radios in use. 


Thanks, 

Steve 


On Jan 23, 2006, at 17:33, Brian Rohrbacher wrote: 




Maybe I am getting this wrong, but isn't Kurt just
trying to do this   https://www.lastmilegear.com/catalog/product_info.php?
cPath=44&products_id=366 
Basically modify Canopy?  What is so wrong with that? 


--- 

Steve Stroh 
425-939-0076 | [EMAIL PROTECTED] |
http://www.stevestroh.com 





-- Brian RohrbacherReliable Internet, LLCwww.reliableinter.netCell 269-838-8338 "Caught up in the Air" 1 Thess. 4:17




-- 
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/

RE: [WISPA] Outdoor Ethernet Splice

[Rick Harnish]

We use these exclusively with our outdoor
enclosures.  We have tried numerous others and we have decided that these “rock”. 
Kudos to Pac Wireless.  I imagine we have used at least 30 of them in the last
few months.  We did find one that was bad.  Test before you take to the field. 
It sure makes exchanging equipment a breeze.  

 



Rick
Harnish

President

OnlyInternet
Broadband & Wireless, Inc.

260-827-2482
Office

260-307-4000
Cell

260-918-4340
VoIP

www.oibw.net

[EMAIL PROTECTED]

 

  

 













From:
[EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Tom DeReggi
Sent: Monday, January 23, 2006
4:31 PM
To: WISPA General List
Subject: Re: [WISPA] Outdoor
Ethernet Splice



 



I don't think I'd use it for an
inline splice personally.





A Short Cat5 cable is fixed to one
side of the device.





 





Tom DeReggi
RapidDSL & Wireless, Inc
IntAirNet- Fixed Wireless Broadband





 





 







- Original Message - 





From: Mark Nash 





To: WISPA General List






Sent: Monday,
January 23, 2006 2:22 PM





Subject: Re: [WISPA]
Outdoor Ethernet Splice





 





Tom, would you please confirm...can
these be used for both bulkhead connections on a pass-through into and
enclosure AND an inline splice without an enclosure?





 





Thanks!






Mark Nash
Network Engineer
UnwiredOnline.Net
350 Holly Street
Junction City, OR 97448
http://www.uwol.net
541-998-
541-998-5599 fax







- Original Message - 





From: Tom
DeReggi 





To: WISPA General List






Sent: Monday,
January 23, 2006 11:18 AM





Subject: Re: [WISPA]
Outdoor Ethernet Splice





 





Yes they work well.





 





ONly one thing... The Bulkhead Nut
looks identicle to the Nut for the other type of Ethernet connectors that are
standard for Rootennas. (The ones the cable just goes through and rubbers
around it.). They are NOT the same NUT! IF you get the NUTs confused, it
strips, and when you go to turn tighted the Bulk head nut, it slips and
rotates. When you use the correct NUT, it workds well and is snug. 





 





Tom DeReggi
RapidDSL & Wireless, Inc
IntAirNet- Fixed Wireless Broadband





 





 







- Original Message - 





From: Richard
Munoz 





To: WISPA General List






Sent: Monday,
January 23, 2006 1:58 PM





Subject: Re: [WISPA]
Outdoor Ethernet Splice





 





This looks intresting.  Anyone
use these first hand?





 





-Richard M.







- Original Message - 





From: Scott Reed 





To: WISPA General List






Sent: Monday,
January 23, 2006 12:32 PM





Subject: Re: [WISPA]
Outdoor Ethernet Splice





 



Would this work? 
http://www.wisp-router.com/product_info.php?cPath=38&products_id=389


Scott Reed 
Owner 
NewWays 
Wireless Networking 
Network Design, Installation and Administration 
www.nwwnet.net 


-- Original Message ---

From: "Mark Nash" <[EMAIL PROTECTED]>

To: "WISPA General List" 

Sent: Mon, 23 Jan 2006 10:16:41 -0800 
Subject: [WISPA] Outdoor Ethernet Splice 

> Anyone have recommendations on products you use for outdoor, weatherproof 
> ethernet splices? 
> 
> Mark Nash 
> Network Engineer 
> UnwiredOnline.Net 
> 350 Holly Street 
> Junction City, OR 97448 
> http://www.uwol.net 
> 541-998- 
> 541-998-5599 fax 
> 
> -- 
> WISPA Wireless List: wireless@wispa.org 
> 
> Subscribe/Unsubscribe: 
> http://lists.wispa.org/mailman/listinfo/wireless

> 
> Archives: http://lists.wispa.org/pipermail/wireless/ 
--- End of Original Message ---








-- 
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/







No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.1.375 / Virus Database: 267.14.22/238 - Release Date: 1/23/2006









-- 
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/









-- 
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/









-- 
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/








-- 
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/

Re: [WISPA] soldering radio's

[Brian Rohrbacher]

Even so, it has to be built before it can be certified.  
We'll just have to assume that this is for testing and he'll have
Moto's and the FCC's approval before he uses it.  
Because like you said, this is not a place where we talk about breaking
the FCC rules.  
I know I wouldn't want the FCC enforcement team tracking me down.


Steve Stroh wrote:

The big difference is that Last Mile Gear is MOTOROLA authorized to do 
such modifications, and THEY have had THEIR modifications FCC 
certified.
  
  
Stating this question in public is a gigantic invitation for 
competitors to invite the FCC in for a chat and a looksee given the 
now-documented (here on the list) possibility that there are illegally 
modified Part-15 gear radios in use.
  
  
  
Thanks,
  
  
Steve
  
  
  
On Jan 23, 2006, at 17:33, Brian Rohrbacher wrote:
  
  
  Maybe I am getting this wrong, but isn't Kurt
just trying to do this  
https://www.lastmilegear.com/catalog/product_info.php?
cPath=44&products_id=366

Basically modify Canopy?  What is so wrong with that?


  
  
---
  
  
Steve Stroh
  
425-939-0076 | [EMAIL PROTECTED] | http://www.stevestroh.com
  
  


-- 
Brian Rohrbacher
Reliable Internet, LLC
www.reliableinter.net
Cell 269-838-8338

"Caught up in the Air" 1 Thess. 4:17


-- 
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/

Re: [WISPA] soldering radio's

[Dawn]

Steve,

I could not have said it better myself.

Thank you,
Dawn


Steve Stroh wrote:



The big difference is that Last Mile Gear is MOTOROLA authorized to 
do  such modifications, and THEY have had THEIR modifications FCC  
certified.


Stating this question in public is a gigantic invitation for  
competitors to invite the FCC in for a chat and a looksee given the  
now-documented (here on the list) possibility that there are 
illegally  modified Part-15 gear radios in use.



Thanks,

Steve


---
---

--
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/

Re: [WISPA] soldering radio's

[Steve Stroh]

The big difference is that Last Mile Gear is MOTOROLA authorized to do  
such modifications, and THEY have had THEIR modifications FCC  
certified.


Stating this question in public is a gigantic invitation for  
competitors to invite the FCC in for a chat and a looksee given the  
now-documented (here on the list) possibility that there are illegally  
modified Part-15 gear radios in use.



Thanks,

Steve


On Jan 23, 2006, at 17:33, Brian Rohrbacher wrote:

Maybe I am getting this wrong, but isn't Kurt just trying to do this   
https://www.lastmilegear.com/catalog/product_info.php? 
cPath=44&products_id=366

Basically modify Canopy?  What is so wrong with that?



---

Steve Stroh
425-939-0076 | [EMAIL PROTECTED] | http://www.stevestroh.com

--
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/

Re: [WISPA] TRANGO!!

[Jeffrey Thomas]

On that note, If I didnt hear it from 3-4 manufacturers directly, and  
ODM's then I would'nt believe it myself.


Still doesnt change the fact that wimax sadly looked over 900mhz  
( not that a wimax phy or mac would

work well in 900 mhz )

-

Jeff

On Jan 21, 2006, at 3:10 PM, Richard Munoz wrote:


AFAIK, Jeff does not promote hype, just facts.

-Richard M.


Not more Hypemax!


Jeffrey Thomas wrote:

Because in 6 months, you will be able to buy a Wimax Cpe for 200  
bucks.


-

Jeff

On Jan 18, 2006, at 4:22 PM, Kurt Fankhauser wrote:

Hope that affects the price of everything else, at this point  
who  would

by an 802.11a cpe for $250 when you can buy a trango for $150?

Kurt Fankhauser
WAVELINC
114 S. Walnut St.
Bucyrus, OH 44820
419-562-6405
www.wavelinc.com


-Original Message-
From: [EMAIL PROTECTED] [mailto:wireless-  
[EMAIL PROTECTED] On

Behalf Of Brian Rohrbacher
Sent: Wednesday, January 18, 2006 1:06 PM
To: WISPA General List
Subject: Re: [WISPA] TRANGO!!

Well MAC.Did we find the right news? Or is there more???

Mac Dearman wrote:

Whooa  - - I got a phone call yesterday from Trango that made  
me  smile




all over!

Guys and Gals - - - -- hang on as we are about to enter the  
Twilight

Zone!!

Trango has some news that is gonna make all of us smile deep,  
long  and



wide!!! I am not at liberty to disclose the info - - but they  
will in

a day or two from what I understand. Man its gonna be G R E A T!!


Mac Dearman
Maximum Access, LLC.
Authorized Barracuda Reseller
MikroTik RouterOS Certified
www.inetsouth.com
www.mac-tel.us
Rayville, La.
318.728.8600 318.303.4227
318.303.4229






--
Brian Rohrbacher
Reliable Internet, LLC
www.reliableinter.net
Cell 269-838-8338

"Caught up in the Air" 1 Thess. 4:17

--
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/



--
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.1.375 / Virus Database: 267.14.20/233 - Release Date:
1/18/2006


--
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/





--
Brian Rohrbacher
Reliable Internet, LLC
www.reliableinter.net
Cell 269-838-8338

"Caught up in the Air" 1 Thess. 4:17

--
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/



--
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.1.375 / Virus Database: 267.14.21/235 - Release Date:  
1/19/2006




--
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/


--
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/

Re: [WISPA] soldering radio's

[Brian Rohrbacher]

Hey Kurt.  I am curious.  What are you soldering and why/purpose?  Can't 
you get connectorized and attach an omni?  Why solder?


Brian Rohrbacher wrote:

Maybe I am getting this wrong, but isn't Kurt just trying to do this  
https://www.lastmilegear.com/catalog/product_info.php?cPath=44&products_id=366 


Basically modify Canopy?  What is so wrong with that?

Dawn wrote:


Kurt,

Asking this question is like asking "Where do I buy a 4 watt amp?"
If you are planning to do this then you should not be in this business
ALSO WISPA is not here to answer these kinds of questions. It gives all
Wireless Internet Providers a bad name.

Thanks,
Dawn


Kurt Fankhauser wrote:

Anyone here have experience soldering connectors on to Motorola 
Canopy radio’s? I’d like to start doing my own soldering and can’t 
figure out where to solder the center conductor and grounds for 
these. There are 3 points where the integrated antenna attaches to 
the PCB and I’m pretty sure that the top solder point is the center 
conductor but I don’t know if the other two are for the ground or what.


Kurt Fankhauser

WAVELINC

114 S. Walnut St.

Bucyrus, OH 44820

419-562-6405

www.wavelinc.com

 



No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.1.375 / Virus Database: 267.14.21/236 - Release Date: 
1/20/2006
 



---
---





--
Brian Rohrbacher
Reliable Internet, LLC
www.reliableinter.net
Cell 269-838-8338

"Caught up in the Air" 1 Thess. 4:17

--
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/

Re: [WISPA] soldering radio's

[Brian Rohrbacher]

Maybe I am getting this wrong, but isn't Kurt just trying to do this  
https://www.lastmilegear.com/catalog/product_info.php?cPath=44&products_id=366

Basically modify Canopy?  What is so wrong with that?

Dawn wrote:


Kurt,

Asking this question is like asking "Where do I buy a 4 watt amp?"
If you are planning to do this then you should not be in this business
ALSO WISPA is not here to answer these kinds of questions. It gives all
Wireless Internet Providers a bad name.

Thanks,
Dawn


Kurt Fankhauser wrote:

Anyone here have experience soldering connectors on to Motorola 
Canopy radio’s? I’d like to start doing my own soldering and can’t 
figure out where to solder the center conductor and grounds for 
these. There are 3 points where the integrated antenna attaches to 
the PCB and I’m pretty sure that the top solder point is the center 
conductor but I don’t know if the other two are for the ground or what.


Kurt Fankhauser

WAVELINC

114 S. Walnut St.

Bucyrus, OH 44820

419-562-6405

www.wavelinc.com



No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.1.375 / Virus Database: 267.14.21/236 - Release Date: 
1/20/2006
 



---
---



--
Brian Rohrbacher
Reliable Internet, LLC
www.reliableinter.net
Cell 269-838-8338

"Caught up in the Air" 1 Thess. 4:17

--
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/

Re: [WISPA] soldering radio's

[Dawn]

Kurt,

Asking this question is like asking "Where do I buy a 4 watt amp?"
If you are planning to do this then you should not be in this business
ALSO WISPA is not here to answer these kinds of questions. It gives all
Wireless Internet Providers a bad name.

Thanks,
Dawn


Kurt Fankhauser wrote:

Anyone here have experience soldering connectors on to Motorola Canopy 
radio’s? I’d like to start doing my own soldering and can’t figure out 
where to solder the center conductor and grounds for these. There are 
3 points where the integrated antenna attaches to the PCB and I’m 
pretty sure that the top solder point is the center conductor but I 
don’t know if the other two are for the ground or what.


Kurt Fankhauser

WAVELINC

114 S. Walnut St.

Bucyrus, OH 44820

419-562-6405

www.wavelinc.com



No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.1.375 / Virus Database: 267.14.21/236 - Release Date: 1/20/2006
 



---
---

--
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/

RE: [WISPA] soldering radio's

[Kurt Fankhauser]

There are 380mw radio’s, I’d
like to stick a 15db omni on one and see what it does.

 



Kurt Fankhauser

WAVELINC

114 S. Walnut St.

Bucyrus, OH 44820

419-562-6405

www.wavelinc.com



 

-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf
Of Marlon K. Schafer (509) 982-2181
Sent: Monday, January 23, 2006 3:17 PM
To: WISPA General List
Subject: Re: [WISPA] soldering
radio's

 



Making that modification would
likely take the radios out of certification.





 





Marlon
(509)
982-2181  
Equipment sales
(408) 907-6910
(Vonage)   
Consulting services
42846865
(icq)   
And I run my own wisp!
64.146.146.12 (net meeting)
www.odessaoffice.com/wireless
www.odessaoffice.com/marlon/cam





 






 







- Original Message - 





From: Kurt
Fankhauser 





To: wireless@wispa.org






Sent: Monday, January 23, 2006 6:05 PM





Subject: [WISPA]
soldering radio's





 



Anyone here have experience
soldering connectors on to Motorola Canopy radio’s? I’d like to start
doing my own soldering and can’t figure out where to solder the center
conductor and grounds for these. There are 3 points where the integrated
antenna attaches to the PCB and I’m pretty sure that the top solder point
is the center conductor but I don’t know if the other two are for the
ground or what.

 

Kurt Fankhauser

WAVELINC

114 S. Walnut St.

Bucyrus, OH 44820

419-562-6405

www.wavelinc.com

 







-- 
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/








-- 
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/

Re: [WISPA] soldering radio's

[Dan Petermann]

Not to mention the warranty... :-)On Jan 23, 2006, at 4:17 PM, Marlon K. Schafer (509) 982-2181 wrote: Making that modification would likely take the radios out of certification.   Marlon(509) 982-2181   Equipment sales(408) 907-6910 (Vonage)    Consulting services42846865 (icq)    And I run my own wisp!64.146.146.12 (net meeting)www.odessaoffice.com/wirelesswww.odessaoffice.com/marlon/cam       - Original Message -   From:   Kurt   Fankhauser   To: wireless@wispa.org   Sent: Monday, January 23, 2006 6:05   PM  Subject: [WISPA] soldering radio'sAnyone here have experience   soldering connectors on to Motorola Canopy radio’s?   I’d like to start doing my own soldering and can’t figure out where to solder   the center conductor and grounds for these. There are 3 points where the   integrated antenna attaches to the PCB and I’m pretty sure that the top solder   point is the center conductor but I don’t know if the other two are for the   ground or what. Kurt   FankhauserWAVELINC114 S. Walnut   St.Bucyrus,   OH   44820419-562-6405www.wavelinc.com   -- WISPA Wireless List:   wireless@wispa.orgSubscribe/Unsubscribe:http://lists.wispa.org/mailman/listinfo/wirelessArchives:   http://lists.wispa.org/pipermail/wireless/-- WISPA Wireless List: wireless@wispa.orgSubscribe/Unsubscribe:http://lists.wispa.org/mailman/listinfo/wirelessArchives: http://lists.wispa.org/pipermail/wireless/ -- 
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/

Re: [WISPA] soldering radio's

[Marlon K. Schafer (509) 982-2181]

Making that modification would likely take the 
radios out of certification.
 
Marlon(509) 
982-2181   
Equipment sales(408) 907-6910 
(Vonage)    
Consulting services42846865 
(icq)    
And I run my own wisp!64.146.146.12 (net meeting)www.odessaoffice.com/wirelesswww.odessaoffice.com/marlon/cam
 
 

  - Original Message - 
  From: 
  Kurt 
  Fankhauser 
  To: wireless@wispa.org 
  Sent: Monday, January 23, 2006 6:05 
  PM
  Subject: [WISPA] soldering radio's
  
  
  Anyone here have experience 
  soldering connectors on to Motorola Canopy radio’s? 
  I’d like to start doing my own soldering and can’t figure out where to solder 
  the center conductor and grounds for these. There are 3 points where the 
  integrated antenna attaches to the PCB and I’m pretty sure that the top solder 
  point is the center conductor but I don’t know if the other two are for the 
  ground or what.
   
  Kurt 
  Fankhauser
  WAVELINC
  114 S. Walnut 
  St.
  Bucyrus, 
  OH 
  44820
  419-562-6405
  www.wavelinc.com
   
  
  

  -- WISPA Wireless List: 
  wireless@wispa.orgSubscribe/Unsubscribe:http://lists.wispa.org/mailman/listinfo/wirelessArchives: 
  http://lists.wispa.org/pipermail/wireless/
-- 
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/

[WISPA] soldering radio's

[Kurt Fankhauser]

Anyone here have experience soldering connectors on to Motorola
Canopy radio’s? I’d like to start doing my
own soldering and can’t figure out where to solder the center conductor
and grounds for these. There are 3 points where the integrated antenna attaches
to the PCB and I’m pretty sure that the top solder point is the center
conductor but I don’t know if the other two are for the ground or what.

 

Kurt Fankhauser

WAVELINC

114 S. Walnut St.

Bucyrus, OH 44820

419-562-6405

www.wavelinc.com

 






-- 
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/

Re: [WISPA] Outdoor Ethernet Splice

[Tom DeReggi]

I don't think I'd use it for an inline splice 
personally.
A Short Cat5 cable is fixed to one side of the 
device.
 
Tom DeReggiRapidDSL & Wireless, IncIntAirNet- Fixed Wireless 
Broadband
 
 

  - Original Message - 
  From: 
  Mark Nash 
  To: WISPA General List 
  Sent: Monday, January 23, 2006 2:22 
  PM
  Subject: Re: [WISPA] Outdoor Ethernet 
  Splice
  
  Tom, would you please confirm...can these be used 
  for both bulkhead connections on a pass-through into and enclosure AND an 
  inline splice without an enclosure?
   
  Thanks!
  Mark NashNetwork EngineerUnwiredOnline.Net350 Holly 
  StreetJunction City, OR 97448http://www.uwol.net541-998-541-998-5599 
  fax
  
- Original Message - 
From: 
Tom DeReggi 
To: WISPA General List 
Sent: Monday, January 23, 2006 11:18 
AM
Subject: Re: [WISPA] Outdoor Ethernet 
Splice

Yes they work well.
 
ONly one thing... The Bulkhead Nut looks 
identicle to the Nut for the other type of Ethernet connectors that are 
standard for Rootennas. (The ones the cable just goes through and rubbers 
around it.). They are NOT the same NUT! IF you get the NUTs confused, it 
strips, and when you go to turn tighted the Bulk head nut, it slips and 
rotates. When you use the correct NUT, it workds well and is 
snug. 
 
Tom DeReggiRapidDSL & Wireless, IncIntAirNet- Fixed 
Wireless Broadband
 
 

  - Original Message - 
  From: 
  Richard Munoz 
  To: WISPA General List 
  Sent: Monday, January 23, 2006 1:58 
  PM
  Subject: Re: [WISPA] Outdoor Ethernet 
  Splice
  
  This looks intresting.  Anyone use these 
  first hand?
   
  -Richard M.
  
- Original Message - 
From: 
Scott Reed 

To: WISPA General List 
Sent: Monday, January 23, 2006 
12:32 PM
Subject: Re: [WISPA] Outdoor 
Ethernet Splice
Would this work? http://www.wisp-router.com/product_info.php?cPath=38&products_id=389 
Scott Reed Owner NewWays Wireless Networking 
Network Design, Installation and Administration www.nwwnet.net 
-- Original Message --- From: 
"Mark Nash" <[EMAIL PROTECTED]> 
To: "WISPA General List"  Sent: 
Mon, 23 Jan 2006 10:16:41 -0800 Subject: [WISPA] Outdoor Ethernet 
Splice > Anyone have recommendations on products you use for 
outdoor, weatherproof > ethernet splices? > > Mark 
Nash > Network Engineer > UnwiredOnline.Net > 350 
Holly Street > Junction City, OR 97448 > http://www.uwol.net 
> 541-998- > 541-998-5599 fax > > -- 
> WISPA Wireless List: wireless@wispa.org > > 
Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless 
> > Archives: http://lists.wispa.org/pipermail/wireless/ 
--- End of Original Message --- 



-- WISPA Wireless List: 
wireless@wispa.orgSubscribe/Unsubscribe:http://lists.wispa.org/mailman/listinfo/wirelessArchives: 
http://lists.wispa.org/pipermail/wireless/



No virus found in this incoming message.Checked by AVG Free 
Edition.Version: 7.1.375 / Virus Database: 267.14.22/238 - Release 
Date: 1/23/2006
  
  

  -- WISPA Wireless List: 
  wireless@wispa.orgSubscribe/Unsubscribe:http://lists.wispa.org/mailman/listinfo/wirelessArchives: 
  http://lists.wispa.org/pipermail/wireless/



-- WISPA Wireless List: 
wireless@wispa.orgSubscribe/Unsubscribe:http://lists.wispa.org/mailman/listinfo/wirelessArchives: 
http://lists.wispa.org/pipermail/wireless/
  
  

  -- WISPA Wireless List: 
  wireless@wispa.orgSubscribe/Unsubscribe:http://lists.wispa.org/mailman/listinfo/wirelessArchives: 
  http://lists.wispa.org/pipermail/wireless/
-- 
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/

RE: [WISPA] Outdoor Ethernet Splice

[Todd Barber]

Mark,

http://www.alliedelec.com/Search/ProductDetail.asp?SKU=565-0107&SEARCH=b
ulgin&ID=&DESC=PX0777%2FUTP

These work well and come with different sized grommets for use with
different diameter cable.  They are about 1/3 more cost than the ones on
wisp-router.  

Todd Barber
Skylink Broadband Internet
[EMAIL PROTECTED]
970-454-9499


-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of Mark Nash
Sent: Monday, January 23, 2006 11:17 AM
To: WISPA General List
Subject: [WISPA] Outdoor Ethernet Splice

Anyone have recommendations on products you use for outdoor,
weatherproof
ethernet splices?

Mark Nash
Network Engineer
UnwiredOnline.Net
350 Holly Street
Junction City, OR 97448
http://www.uwol.net
541-998-
541-998-5599 fax



-- 
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/



-- 
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.1.375 / Virus Database: 267.14.22/238 - Release Date:
1/23/2006



-- 
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/

[WISPA] 3 ft Dual Pol antennas

[Tom DeReggi]

The street price I have found on 3 ft Dual pol 5.2-58Ghz parabolic antennas 
have been around 


$1045 for Andrews, and $1025 for Radiowaves.

Any vendors on list in a possition to do better than that? If so, contact me 
off list.


I find it odd, that there is such a large gap between 2 feet and 3 feet.
2 feet Dual pol gabriels are runing around $350.  It would be nice if 
someone came up with something half way in between for 3 ft dual pol.


Tom DeReggi
RapidDSL & Wireless, Inc
IntAirNet- Fixed Wireless Broadband


--
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/

Re: [WISPA] Outdoor Ethernet Splice

[Mac Dearman]

I agree with Mark - -  clarification please :-)

Mac Dearman
Maximum Access, LLC.
Authorized Barracuda Reseller
MikroTik RouterOS Certified
www.inetsouth.com
www.mac-tel.us
Rayville, La.
318.728.8600 
318.303.4227

318.303.4229





Mark Nash wrote:

Tom, would you please confirm...can these be used for both bulkhead 
connections on a pass-through into and enclosure AND an inline splice 
without an enclosure?
 
Thanks!


Mark Nash
Network Engineer
UnwiredOnline.Net
350 Holly Street
Junction City, OR 97448
http://www.uwol.net
541-998-
541-998-5599 fax

- Original Message -
*From:* Tom DeReggi 
*To:* WISPA General List 
*Sent:* Monday, January 23, 2006 11:18 AM
*Subject:* Re: [WISPA] Outdoor Ethernet Splice

Yes they work well.
 
ONly one thing... The Bulkhead Nut looks identicle to the Nut for

the other type of Ethernet connectors that are standard for
Rootennas. (The ones the cable just goes through and rubbers
around it.). They are NOT the same NUT! IF you get the NUTs
confused, it strips, and when you go to turn tighted the Bulk head
nut, it slips and rotates. When you use the correct NUT, it workds
well and is snug. 
 
Tom DeReggi

RapidDSL & Wireless, Inc
IntAirNet- Fixed Wireless Broadband
 
 


- Original Message -
*From:* Richard Munoz 
*To:* WISPA General List 
*Sent:* Monday, January 23, 2006 1:58 PM
*Subject:* Re: [WISPA] Outdoor Ethernet Splice

This looks intresting.  Anyone use these first hand?
 
-Richard M.


- Original Message -
*From:* Scott Reed 
*To:* WISPA General List 
*Sent:* Monday, January 23, 2006 12:32 PM
*Subject:* Re: [WISPA] Outdoor Ethernet Splice

Would this work?
http://www.wisp-router.com/product_info.php?cPath=38&products_id=389




Scott Reed
Owner
NewWays
Wireless Networking
Network Design, Installation and Administration
www.nwwnet.net 


*-- Original Message ---*
From: "Mark Nash" <[EMAIL PROTECTED] >
To: "WISPA General List" mailto:wireless@wispa.org>>
Sent: Mon, 23 Jan 2006 10:16:41 -0800
Subject: [WISPA] Outdoor Ethernet Splice

> Anyone have recommendations on products you use for
outdoor, weatherproof
> ethernet splices?
>
> Mark Nash
> Network Engineer
> UnwiredOnline.Net
> 350 Holly Street
> Junction City, OR 97448
> http://www.uwol.net 
> 541-998-
> 541-998-5599 fax
>
> --
> WISPA Wireless List: wireless@wispa.org
>
> Subscribe/Unsubscribe:
> http://lists.wispa.org/mailman/listinfo/wireless
>
> Archives: http://lists.wispa.org/pipermail/wireless/
*--- End of Original Message ---*



-- 
WISPA Wireless List: wireless@wispa.org


Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/



No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.1.375 / Virus Database: 267.14.22/238 - Release
Date: 1/23/2006


-- 
WISPA Wireless List: wireless@wispa.org


Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/


-- 
WISPA Wireless List: wireless@wispa.org


Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/


--
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/

[WISPA] Anyone know Verilan?

[Mark Koskenmaki]

 
http://www.verilan.com/
 
I was hoping to have a closer additional source for 
things (I always try to have more than one) and these people have 
some stuff I use listed for sale at decent prices.
 
But, over the course of about 3 days, and 
approximately 30 phone calls to thier number, I never managed to reach a live 
person.   I tried accounting, tech support, sales, 
etc.   I lost track of the number of times I called, but I called 
everywhere between morning, after 5, mid-day, 
etc.   
 
I realize this isn't saying much positive about 
them, I was just wondering if anyone else had heard of them or done business 
with them.
 
Thanks
 
North East Oregon Fastnet, LLC 509-593-4061personal correspondence 
to:  mark at neofast dot netsales inquiries to:  purchasing at 
neofast dot netFast Internet, NO 
WIRES!-
-- 
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/

Re: [WISPA] Outdoor Ethernet Splice

[Mark Nash]

Tom, would you please confirm...can these be used 
for both bulkhead connections on a pass-through into and enclosure AND an inline 
splice without an enclosure?
 
Thanks!
Mark NashNetwork EngineerUnwiredOnline.Net350 Holly 
StreetJunction City, OR 97448http://www.uwol.net541-998-541-998-5599 
fax

  - Original Message - 
  From: 
  Tom 
  DeReggi 
  To: WISPA General List 
  Sent: Monday, January 23, 2006 11:18 
  AM
  Subject: Re: [WISPA] Outdoor Ethernet 
  Splice
  
  Yes they work well.
   
  ONly one thing... The Bulkhead Nut looks 
  identicle to the Nut for the other type of Ethernet connectors that are 
  standard for Rootennas. (The ones the cable just goes through and rubbers 
  around it.). They are NOT the same NUT! IF you get the NUTs confused, it 
  strips, and when you go to turn tighted the Bulk head nut, it slips and 
  rotates. When you use the correct NUT, it workds well and is 
  snug. 
   
  Tom DeReggiRapidDSL & Wireless, IncIntAirNet- Fixed Wireless 
  Broadband
   
   
  
- Original Message - 
From: 
Richard Munoz 
To: WISPA General List 
Sent: Monday, January 23, 2006 1:58 
PM
Subject: Re: [WISPA] Outdoor Ethernet 
Splice

This looks intresting.  Anyone use these 
first hand?
 
-Richard M.

  - Original Message - 
  From: 
  Scott Reed 
  
  To: WISPA General List 
  Sent: Monday, January 23, 2006 12:32 
  PM
  Subject: Re: [WISPA] Outdoor Ethernet 
  Splice
  Would this work? http://www.wisp-router.com/product_info.php?cPath=38&products_id=389 
  Scott Reed Owner NewWays Wireless Networking 
  Network Design, Installation and Administration www.nwwnet.net 
  -- Original Message --- From: "Mark 
  Nash" <[EMAIL PROTECTED]> To: 
  "WISPA General List"  Sent: Mon, 
  23 Jan 2006 10:16:41 -0800 Subject: [WISPA] Outdoor Ethernet Splice 
  > Anyone have recommendations on products you use for outdoor, 
  weatherproof > ethernet splices? > > Mark Nash 
  > Network Engineer > UnwiredOnline.Net > 350 Holly 
  Street > Junction City, OR 97448 > http://www.uwol.net > 
  541-998- > 541-998-5599 fax > > -- > WISPA 
  Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: 
  > http://lists.wispa.org/mailman/listinfo/wireless 
  > > Archives: http://lists.wispa.org/pipermail/wireless/ 
  --- End of Original Message --- 
  
  

  -- WISPA Wireless List: 
  wireless@wispa.orgSubscribe/Unsubscribe:http://lists.wispa.org/mailman/listinfo/wirelessArchives: 
  http://lists.wispa.org/pipermail/wireless/
  
  

  No virus found in this incoming message.Checked by AVG Free 
  Edition.Version: 7.1.375 / Virus Database: 267.14.22/238 - Release 
  Date: 1/23/2006



-- WISPA Wireless List: 
wireless@wispa.orgSubscribe/Unsubscribe:http://lists.wispa.org/mailman/listinfo/wirelessArchives: 
http://lists.wispa.org/pipermail/wireless/
  
  

  -- WISPA Wireless List: 
  wireless@wispa.orgSubscribe/Unsubscribe:http://lists.wispa.org/mailman/listinfo/wirelessArchives: 
  http://lists.wispa.org/pipermail/wireless/
-- 
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/

Re: [WISPA] Outdoor Ethernet Splice

[Tom DeReggi]

Yes they work well.
 
ONly one thing... The Bulkhead Nut looks identicle 
to the Nut for the other type of Ethernet connectors that are standard for 
Rootennas. (The ones the cable just goes through and rubbers around it.). They 
are NOT the same NUT! IF you get the NUTs confused, it strips, and when you go 
to turn tighted the Bulk head nut, it slips and rotates. When you use the 
correct NUT, it workds well and is snug. 
 
Tom DeReggiRapidDSL & Wireless, IncIntAirNet- Fixed Wireless 
Broadband
 
 

  - Original Message - 
  From: 
  Richard Munoz 
  To: WISPA General List 
  Sent: Monday, January 23, 2006 1:58 
  PM
  Subject: Re: [WISPA] Outdoor Ethernet 
  Splice
  
  This looks intresting.  Anyone use these 
  first hand?
   
  -Richard M.
  
- Original Message - 
From: 
Scott Reed 

To: WISPA General List 
Sent: Monday, January 23, 2006 12:32 
PM
Subject: Re: [WISPA] Outdoor Ethernet 
Splice
Would this work? http://www.wisp-router.com/product_info.php?cPath=38&products_id=389 
Scott Reed Owner NewWays Wireless Networking Network 
Design, Installation and Administration www.nwwnet.net -- Original Message 
--- From: "Mark Nash" <[EMAIL PROTECTED]> To: "WISPA General 
List"  
Sent: Mon, 23 Jan 2006 10:16:41 -0800 Subject: [WISPA] Outdoor 
Ethernet Splice > Anyone have recommendations on products you use 
for outdoor, weatherproof > ethernet splices? > > Mark 
Nash > Network Engineer > UnwiredOnline.Net > 350 Holly 
Street > Junction City, OR 97448 > http://www.uwol.net > 
541-998- > 541-998-5599 fax > > -- > WISPA 
Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: 
> http://lists.wispa.org/mailman/listinfo/wireless > 
> Archives: http://lists.wispa.org/pipermail/wireless/ --- 
End of Original Message --- 



-- WISPA Wireless List: 
wireless@wispa.orgSubscribe/Unsubscribe:http://lists.wispa.org/mailman/listinfo/wirelessArchives: 
http://lists.wispa.org/pipermail/wireless/



No virus found in this incoming message.Checked by AVG Free 
Edition.Version: 7.1.375 / Virus Database: 267.14.22/238 - Release Date: 
1/23/2006
  
  

  -- WISPA Wireless List: 
  wireless@wispa.orgSubscribe/Unsubscribe:http://lists.wispa.org/mailman/listinfo/wirelessArchives: 
  http://lists.wispa.org/pipermail/wireless/
-- 
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/

[WISPA] M5580 feedback and Dish mounting help

[Tom DeReggi]

The Trango M5580 is a great product and been working well from a stability 
perspective and price point, and glqd to have it as an option. However, 
there are several challenges to deal with.


There are two negatives that creates a third.

1) 8 db int antenna, so 7 db less than Fox5800.
2) No longer supports RF Threshhold command.

The range drops down to two miles, giving you a -74 signal, more easilly 
able to survive the noise using DSSS.
However when upgraded to OFDM, I'm concerned about the low gain of the radio 
being able to survive the noise with adequate singal to noise threshold. 
I'm guessing the range will be more like 1 mile to have high enough signal 
to support the high modulations. Unless of course the dish install is used. 
This is where we make a savings. Using a inexpensive M5580 w/ dish apposed 
to Fox-D.


The foxes without the dish was convenient because we could mount lower, on 
the side of the wall or under eves. Now we are in most cases goingto be 
required to mount on the roof or on the side of the house at the peak.  I 
hate drilling down into the roof, for water proof liability reasons, but its 
likely that may have to start happening.


What we are finding is that most of the houses we are targeting, we are 
finding that the peaks are taller than our 30 ft ladders can reach, and 
often taller than our 40 foot ladders can reach.  We are also finding our 
underserved area, are larger homes with very steep peaked roofs, causing 
safety issues.  We often will carry a 20 ft section of ladder with hooks, 
and lift it onto the peak as our method to climb. But when the edge of the 
roof is up 30 feeet, its scary pulling the ladder up, to lift onto the roof. 
Clearly a two man job, that takes care.  What we are finding that we are 
doing instead, is we are finding a way up to the peak of the roof, and then 
we straddle the peak so we can safely manuver to the  side edge where we 
mount a Pole (with M-mount and contilever mount), and have DSS dish extend 
over the roof line.  Its can be difficult hangling down over the edge to 
mount the bottom cross bar to stablize the pole.


So my question is, how are people optimizing this process? I know some one 
makes a pre-made kit in steel, for this type of mount, without needing to 
cut 2x4s.  Whats the best place to find these mounts, and what thickness do 
they need to be to adequately support the Fox Dishes?


I need to make the determination if we can cost effectively still mount to 
the side of the house easilly for these installations, or if we have to 
lower ourselves to Cable TV standard, and screw through the roof :-(   And 
at what point we are better off staying with Fox5800 SUs, apposed to the 
timely and more costly install requirements.


Any suggestions to speed this mounting process is helpful. ( at heights 
higher than 40 feet, for DISH mounting )


One of the guys at The Trango show had some suggestions on this, but I 
misplaced the info I got from him on part numbers.


I was consodering upgrading to a bucket truck, but most cost effective 
bucket trucks wont get us up to the 45 feet peak height requirement in most 
cases.  (walk out basements, with Step peaked roof, and multiple stories are 
common here and killers of the quick install)


Tom DeReggi
RapidDSL & Wireless, Inc
IntAirNet- Fixed Wireless Broadband


--
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/

Re: [WISPA] Outdoor Ethernet Splice

[Mac Dearman]

To tell you the truth I have been looking at those for months now and 
couldnt decide if it was an actual  "splicer" (which I could use a few 
of) or something you add to an outdoor enclosure for a pass-thru. (of 
which I could use a few)


 If someone figures it out - - please post :-)

Thanks
Mac

Maximum Access, LLC.
Authorized Barracuda Reseller
MikroTik RouterOS Certified
www.inetsouth.com
www.mac-tel.us
Rayville, La.
318.728.8600 
318.303.4227

318.303.4229





Richard Munoz wrote:


This looks intresting.  Anyone use these first hand?
 
-Richard M.


- Original Message -
*From:* Scott Reed 
*To:* WISPA General List 
*Sent:* Monday, January 23, 2006 12:32 PM
*Subject:* Re: [WISPA] Outdoor Ethernet Splice

Would this work?
http://www.wisp-router.com/product_info.php?cPath=38&products_id=389



Scott Reed
Owner
NewWays
Wireless Networking
Network Design, Installation and Administration
www.nwwnet.net 


*-- Original Message ---*
From: "Mark Nash" <[EMAIL PROTECTED] >
To: "WISPA General List" mailto:wireless@wispa.org>>
Sent: Mon, 23 Jan 2006 10:16:41 -0800
Subject: [WISPA] Outdoor Ethernet Splice

> Anyone have recommendations on products you use for outdoor,
weatherproof
> ethernet splices?
>
> Mark Nash
> Network Engineer
> UnwiredOnline.Net
> 350 Holly Street
> Junction City, OR 97448
> http://www.uwol.net 
> 541-998-
> 541-998-5599 fax
>
> --
> WISPA Wireless List: wireless@wispa.org
>
> Subscribe/Unsubscribe:
> http://lists.wispa.org/mailman/listinfo/wireless
>
> Archives: http://lists.wispa.org/pipermail/wireless/
*--- End of Original Message ---*


-- 
WISPA Wireless List: wireless@wispa.org


Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/


No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.1.375 / Virus Database: 267.14.22/238 - Release Date:
1/23/2006


--
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/

Re: [WISPA] Outdoor Ethernet Splice

[Richard Munoz]

This looks intresting.  Anyone use these first 
hand?
 
-Richard M.

  - Original Message - 
  From: 
  Scott Reed 
  To: WISPA General List 
  Sent: Monday, January 23, 2006 12:32 
  PM
  Subject: Re: [WISPA] Outdoor Ethernet 
  Splice
  Would this work? http://www.wisp-router.com/product_info.php?cPath=38&products_id=389 
  Scott Reed Owner NewWays Wireless Networking Network 
  Design, Installation and Administration www.nwwnet.net -- Original Message 
  --- From: "Mark Nash" <[EMAIL PROTECTED]> To: "WISPA General List" 
   Sent: 
  Mon, 23 Jan 2006 10:16:41 -0800 Subject: [WISPA] Outdoor Ethernet Splice 
  > Anyone have recommendations on products you use for outdoor, 
  weatherproof > ethernet splices? > > Mark Nash > 
  Network Engineer > UnwiredOnline.Net > 350 Holly Street > 
  Junction City, OR 97448 > http://www.uwol.net > 541-998- > 
  541-998-5599 fax > > -- > WISPA Wireless List: 
  wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > 
  > Archives: http://lists.wispa.org/pipermail/wireless/ --- 
  End of Original Message --- 
  
  

  -- WISPA Wireless List: 
  wireless@wispa.orgSubscribe/Unsubscribe:http://lists.wispa.org/mailman/listinfo/wirelessArchives: 
  http://lists.wispa.org/pipermail/wireless/
  
  

  No virus found in this incoming message.Checked by AVG Free 
  Edition.Version: 7.1.375 / Virus Database: 267.14.22/238 - Release Date: 
  1/23/2006
-- 
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/

RE: [WISPA] MT W/ OSPF Problem

[Kurt Fankhauser]

This has nothing to do with OSPF, call me I
know what it is.

 



Kurt Fankhauser

WAVELINC

114 S. Walnut St.

Bucyrus, OH 44820

419-562-6405

www.wavelinc.com



 

-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf
Of Bo Hamilton
Sent: Monday, January 23, 2006
10:38 AM
To: WISPA General List
Subject: [WISPA] MT W/ OSPF
Problem

 



Hello everyone!  Im using MT W/ OSPF and Im
unable to hit certain backhaul radios or computers on my backhaul sub.





 





Example:





 





On a switch (Radio, Ftp Server Web server, MT
Router)---(Backhaul 10.10.1.x/24)---Radio->MT router ether1





 





(Same Board)MT Ether2RadioAP--(wireless
sub 10.155.2.x/24)Client





 





If im on the client end I cannot reach my internal ftp
server or my web server, but I can hit my core router(10.10.1.x) or my Mt
router ether1(same sub) at the tower.   So in short, anything
plugged into my switch at the NOC besides my core router I
can access.  Weird!   





Anyone got an idea





 





Thanks 





 





Bo  





 





 








-- 
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/

[WISPA] MT W/ OSPF Problem

[Bo Hamilton]

Hello everyone!  Im using MT W/ OSPF and Im unable to hit certain backhaul radios or computers on my backhaul sub.
 
Example:
 
On a switch (Radio, Ftp Server Web server, MT Router)---(Backhaul 10.10.1.x/24)---Radio->MT router ether1
 
(Same Board)MT Ether2RadioAP--(wireless sub 10.155.2.x/24)Client
 
If im on the client end I cannot reach my internal ftp server or my web server, but I can hit my core router(10.10.1.x) or my Mt router ether1(same sub) at the tower.   So in short, anything plugged into my switch at the NOC besides my core router I can access.  Weird!  

Anyone got an idea
 
Thanks 
 
Bo  
 
 
-- 
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/

Re: [WISPA] Outdoor Ethernet Splice

[Scott Reed]

Would this work?
http://www.wisp-router.com/product_info.php?cPath=38&products_id=389

Scott Reed 


Owner 


NewWays 


Wireless Networking 


Network Design, Installation and Administration 


www.nwwnet.net 




-- Original Message 
---

From: "Mark Nash" <[EMAIL PROTECTED]> 


To: "WISPA General List"  


Sent: Mon, 23 Jan 2006 10:16:41 -0800 


Subject: [WISPA] Outdoor Ethernet Splice 



> Anyone have recommendations on products you use for outdoor, 
weatherproof 
> 

ethernet splices? 
> 
> 

Mark Nash 
> 

Network Engineer 
> 

UnwiredOnline.Net 
> 

350 Holly Street 
> 

Junction City, OR 97448 
> 

http://www.uwol.net 
> 

541-998- 
> 

541-998-5599 fax 
> 
> 

--  
> 

WISPA Wireless List: wireless@wispa.org 
> 
> 

Subscribe/Unsubscribe: 
> 

http://lists.wispa.org/mailman/listinfo/wireless 
> 

> 

Archives: http://lists.wispa.org/pipermail/wireless/ 
--- 
End of Original Message 
---






-- 
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/

[WISPA] Outdoor Ethernet Splice

[Mark Nash]

Anyone have recommendations on products you use for outdoor, weatherproof
ethernet splices?

Mark Nash
Network Engineer
UnwiredOnline.Net
350 Holly Street
Junction City, OR 97448
http://www.uwol.net
541-998-
541-998-5599 fax



-- 
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/

Re: [WISPA] TRANGO!!

[Matt Liotta]

More to his point if everyone is at a trade show.

-Matt

Tom DeReggi wrote:


Everyone might be at the WCA show, that was the 17-20th?

Tom DeReggi
RapidDSL & Wireless, Inc
IntAirNet- Fixed Wireless Broadband


- Original Message - From: <[EMAIL PROTECTED]>
To: "WISPA General List" 
Sent: Sunday, January 22, 2006 9:04 AM
Subject: RE: [WISPA] TRANGO!!




Not sure how well Trango has thought out the direct sales model 
though. Three
calls and an email to them has yeilded nothing but dead air.  At 
least I could

call a VAR and speak to someone.

just my $.02

chris
--
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/ 





--
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/

Re: [WISPA] TRANGO!!

[Tom DeReggi]

Everyone might be at the WCA show, that was the 17-20th?

Tom DeReggi
RapidDSL & Wireless, Inc
IntAirNet- Fixed Wireless Broadband


- Original Message - 
From: <[EMAIL PROTECTED]>

To: "WISPA General List" 
Sent: Sunday, January 22, 2006 9:04 AM
Subject: RE: [WISPA] TRANGO!!




Not sure how well Trango has thought out the direct sales model though. 
Three
calls and an email to them has yeilded nothing but dead air.  At least I 
could

call a VAR and speak to someone.

just my $.02

chris
--
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/ 


--
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/