Re: [WISPA] Adzilla Revenue Streams

2006-03-07 Thread Peter R.
I worked with Martin at Adzilla on a Conference Call to introduce him to some prospective ISPs. (http://www.rad-info.net/partners/adzilla.htm) Adzilla is a possible revenue stream for ISPs through ad replacement. (Instead of them seeing the ILEC ad, they can see you ad). It is definitely worth

Re: [WISPA] Teletronics Sectors

2006-03-07 Thread Julius Igugu
http://www.teletronics.com/tant24sector19dbi.html#specs - Original Message - From: Jason Wallace [EMAIL PROTECTED] To: WISPA General List wireless@wispa.org Sent: Monday, March 06, 2006 11:24 PM Subject: [WISPA] Teletronics Sectors Anyone using the 19 dbi Hz Pol 120 deg sector from

[WISPA] OT: Automated Call System

2006-03-07 Thread Bill Austin
I need to setup an automated call system. One where someone dials in and activates it (by entering a touch-tone code) and then it goes through a list of numbers it dials and plays a pre-recorded message. Any hints, tips, suggestions, software recommendations, or other advice will be greatly

Re: [WISPA] VoIP/PBX Gateway appliance

2006-03-07 Thread Matt Liotta
Charles Wu wrote: Out of curiosity...do you mean 2-5 cents per minute? Or 0.2 to 0.5 cents per minute? .2 cents; 2 cents a minute wouldn't be a very good deal. -Matt -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless

Re: [WISPA] VoIP/PBX Gateway appliance

2006-03-07 Thread Brian Whigham
care to share who you're using for termination or how much volume you're purchasing? Matt Liotta wrote: Charles Wu wrote: Out of curiosity...do you mean 2-5 cents per minute? Or 0.2 to 0.5 cents per minute? .2 cents; 2 cents a minute wouldn't be a very good deal. -Matt -- WISPA

Re: [WISPA] OT: Automated Call System

2006-03-07 Thread Brian Whigham
Bill, Are you talking about an Auto Attendant that can provide precanned messages for callers like a call center does? For example, your cellular providers's support center will make you key in various option codes to talk to the correct department. If that's what you're looking for, use

Re: [WISPA] VoIP/PBX Gateway appliance

2006-03-07 Thread Matt Liotta
I can't share that information. -Matt Brian Whigham wrote: care to share who you're using for termination or how much volume you're purchasing? Matt Liotta wrote: Charles Wu wrote: Out of curiosity...do you mean 2-5 cents per minute? Or 0.2 to 0.5 cents per minute? .2 cents; 2

[WISPA] Looking for a wireless cam

2006-03-07 Thread Victoria
We are going to be doing some events where we would like to broadcast on the web. Any one have any experience with this? If so what type of cam, server, etc. Thanks! Victoria Proffer www.StLouisBroadBand.com 314-974-5600 -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe:

RE: [WISPA] Adzilla Revenue Streams

2006-03-07 Thread Eric DaVersa
Charles - glad to hear that John is speaking at WiNOG! Your attendees should find his presentation VERY interested. We partnered with Adzilla recently. With our growth in the Citywide Wi-Fi market and all the FREE offerings out there, I did a lot of research on advertising models to help Network

[WISPA] YDI AP-Plus Power Supply

2006-03-07 Thread Mark Nash
Anyone know what power supply specs I'd need for a YDI AP-Plus (the older kind with the card slots)? I'm removing it from a WiPOP-In-A-Box which has built-in power supplies. I think it's 48vdc. Thanks. Mark NashNetwork EngineerUnwiredOnline.Net350 Holly StreetJunction City, OR

Re: [WISPA] YDI AP-Plus Power Supply

2006-03-07 Thread Julius Igugu
It should be 12V. - Original Message - From: Mark Nash To: WISPA General List Sent: Tuesday, March 07, 2006 7:44 PM Subject: [WISPA] YDI AP-Plus Power Supply Anyone know what power supply specs I'd need for a YDI AP-Plus (the older kind with the card

RE: [WISPA] YDI AP-Plus Power Supply

2006-03-07 Thread Brian Webster
As I recall that is correct if you are using the POE adapter. I just worked on a unipop with an AMP that had one. Thank You, Brian Webster www.wirelessmapping.com -Original Message-From: Mark Nash [mailto:[EMAIL PROTECTED]Sent: Tuesday, March 07, 2006 1:45 PMTo: WISPA

Re: [WISPA] OT: Automated Call System

2006-03-07 Thread Jory Privett
So you want something that calls out to a list of numbers right? You can get the software that the new automated telemarketers are using. I have seen it several times but I do not remember where. It basically calls a list of numbers and plays a pre recorded message. Jory Privett WCCS

Re: [WISPA] OT: Automated Call System

2006-03-07 Thread Brian Whigham
Bill, Yeah, of course Asterisk can do that. You could buy a turn-key system and have that be part of it's features. You could use it for that solely. I see that there are online services which are pay per use as well. I just noticed http://www.notifyquick.com/howto/canned_call.asp Here's

Re: [WISPA] OT: Automated Call System

2006-03-07 Thread Jason Hensley
Bill, Not sure if you got my offlist email, but you can go to www.tavoca.com and look at their GroupCall product. Does exactly what you need it to do. Friend of mine runs this company and will do great for what you want. - Original Message - From: Bill Austin [EMAIL PROTECTED]

Re: [WISPA] Teletronics Sectors

2006-03-07 Thread KyWiFi LLC
How much can this model be purchased for? It looks like a good high gain H-POL sector IMO. We've been quite pleased with SuperPass sectors but their gain is only 13.5dBi for a 120 Degree H-POL. Sincerely, Shannon D. Denniston, Co-Founder KyWiFi, LLC - Mt. Sterling, Kentucky http://www.KyWiFi.com

Re: [WISPA] 5.4 very close now

2006-03-07 Thread Steve Stroh
Rick: I think you're confused with 3.65 GHz (still in the works, FCC proposed contention-based sharing mechanism.) This is an additional 255 MHz of spectrum around 5.4 GHz and IT requires Dynamic Frequency Sharing (I think?) - DFS - basically if the radio hears a US DOD RADAR system, it

[WISPA] OT: VoIP termination

2006-03-07 Thread Brian Whigham
I don't know what volume Matt's dealing with. But, I haven't checked the lowest prices in a few months; so my interest was piqued. Here's what I found. If anyone has any experience with these providers, let me know. Both provide IAX2 and SIP. sellvoip.net (since '97) Product

Re: [WISPA] Adzilla Revenue Streams

2006-03-07 Thread Mark Koskenmaki
North East Oregon Fastnet, LLC 509-593-4061 personal correspondence to: mark at neofast dot net sales inquiries to: purchasing at neofast dot net Fast Internet, NO WIRES! - - Original Message - From: Eric

Re: [WISPA] Blocking ripe network ip space?

2006-03-07 Thread Eric Merkel
Is there a place to get a list of currently allocated IP space by country? I am considering doing something similar but will probably not do an all out block but maybe do some connection rate limiting of IP space from those countries. -Eric On 3/6/06, David E. Smith [EMAIL PROTECTED] wrote: Mac

Re: [WISPA] YDI AP-Plus Power Supply

2006-03-07 Thread Mac Dearman
Mark, I can tell you for a fact it is 5.0volts/ 4.00A (it also has a propriteary end)and it is an Orinoco AP2000 Power supply as the YDI AP-Plus is an Orinoco AP2000 :-) If you are doing POE you will need an ethernet splitter at the AP and it needs to be fed 48Volts I have pics and

Re: [WISPA] Adzilla Revenue Streams

2006-03-07 Thread Brian Rohrbacher
Sign me up. When and where??? Eric DaVersa wrote: The simple answer to that is don't use that option. The ad optimization is transparent and its basically free money. I usually have to say it 3 times before ISPs start to understand the concept, so in the interest of saving time...

Re: [WISPA] FCC meeting in Jackson, MS Today

2006-03-07 Thread Ron Wallace
Mac, You always seem to get right, Mac. Good to hear. And I agree with your approach, ya'll.-Original Message-From: Mac Dearman [mailto:[EMAIL PROTECTED]Sent: Tuesday, March 7, 2006 06:40 PMTo: 'WISPA General List'Subject: Re: [WISPA] FCC meeting in Jackson, MS Today I thought I would let

Re: [WISPA] Adzilla Revenue Streams

2006-03-07 Thread Jory Privett
What are the subs that I have to have to get a system like this??? Jory Privett WCCS - Original Message - From: Eric DaVersa [EMAIL PROTECTED] To: 'WISPA General List' wireless@wispa.org Sent: Tuesday, March 07, 2006 5:34 PM Subject: RE: [WISPA] Adzilla Revenue Streams The simple

[WISPA] New revenue stream

2006-03-07 Thread A. Huppenthal
I have client who asked me if a tasteful nude picture web server would be okay to deploy on the network. They are willing to pay 5 times the normal rate for co-location, plus additional fees for high load times. When I called Qwest to find out about their policy they said they aren't in the

Re: [WISPA] New revenue stream *THREAD CLOSED!*

2006-03-07 Thread Alex Huppenthal
my apologies to the members of the list if they found it offensive. Reality is we need to consider content rules as much as need to consider VoIP gateways. since you've arbitrarily decided its not 'proper content' based on your view, I've decided to drop my involvement in WISPA. bye On

[WISPA] New revenue service?

2006-03-07 Thread Blair Davis
I have been looking into offering a different service Ad removed browsing. Blocking ads as an extra cost service... -- Blair Davis AOL IM Screen Name -- Theory240 West Michigan Wireless ISP 269-686-8648 A division of: Camp Communication Services, INC -- WISPA Wireless List:

RE: [WISPA] Adzilla Revenue Streams

2006-03-07 Thread Charles Wu
What are the subs that I have to have to get a system like this??? Jory Privett WCCS Hi Jory, Are you coming to WiNOG? The people from Adzilla will be there, so you can meet them first-hand and talk with them directly -Charles --- WiNOG Austin, TX

RE: [WISPA] New revenue stream *THREAD CLOSED!*

2006-03-07 Thread Charles Wu
Title: Message Like it or not, it is worth noting that p0rn accounts for a VAST OVERWHELMING MAJORITY of Internet traffic -Charles ---WiNOG Austin, TXMarch 13-15, 2006http://www.winog.com -Original Message-From: [EMAIL PROTECTED]

[WISPA] Moderation Duties and Criticism

2006-03-07 Thread Rick Harnish
To All, I took over the moderation of the wireless@wispa.org list about a year and one half ago. The previous moderator handed over the reigns for a variety of reasons but many of which were criticisms about how he did his job and the personal stress involved. I have received the same