effect on the RF.
-Paul Reimer
From: The EDUCAUSE Wireless Issues Constituent Group Listserv
[mailto:WIRELESS-LAN@LISTSERV.EDUCAUSE.EDU] On Behalf Of Chuck Enfield
Sent: Thursday, March 9, 2017 4:09 PM
To: WIRELESS-LAN@LISTSERV.EDUCAUSE.EDU
Subject: Re: [WIRELESS-LAN] 2.4 GHz Interference
Props
Props Jake!
From: The EDUCAUSE Wireless Issues Constituent Group Listserv
[mailto:WIRELESS-LAN@LISTSERV.EDUCAUSE.EDU] On Behalf Of Gray, Sean
Sent: Thursday, March 09, 2017 4:01 PM
To: WIRELESS-LAN@LISTSERV.EDUCAUSE.EDU
Subject: Re: [WIRELESS-LAN] 2.4 GHz Interference
Hi Everyone,
So
: Re: [WIRELESS-LAN] 2.4 GHz Interference
Power and distance matter greatly in RF. Could be differences in client TX
power, distance from the wispy, the client card, or even the filters in the
card. Even the same make/model of card can variants in output. Partially why
we can't have calibrated
Group Listserv
[mailto:WIRELESS-LAN@LISTSERV.EDUCAUSE.EDU] On Behalf Of Gray, Sean
Sent: Wednesday, March 8, 2017 3:39 PM
To: WIRELESS-LAN@LISTSERV.EDUCAUSE.EDU
Subject: Re: [WIRELESS-LAN] 2.4 GHz Interference
Highly likely, the majority of our APs are in classrooms, offices and hallways.
I’ll start
ding.
> Something in Sean’s trace still doesn’t add up for me.
>
> From: Jake Snyder
> Sent: Wednesday, March 8, 2017 9:16 PM
> To: Chuck Enfield
> Cc: WIRELESS-LAN@LISTSERV.EDUCAUSE.EDU
> Subject: Re: [WIRELESS-LAN] 2.4 GHz Interference
>
>
> Might check this out:
WIRELESS-LAN@LISTSERV.EDUCAUSE.EDU<mailto:WIRELESS-LAN@LISTSERV.EDUCAUSE.EDU>
Subject: Re: [WIRELESS-LAN] 2.4 GHz Interference
Still learning my way through signatures but I have been caught out before with
the anaylzer being too close to a wifi source
Below shows this on channel 132, using iperf
ent: Wednesday, March 08, 2017 6:08 PM
> To: WIRELESS-LAN@LISTSERV.EDUCAUSE.EDU
> Subject: Re: [WIRELESS-LAN] 2.4 GHz Interference
>
> Still learning my way through signatures but I have been caught out before
> with the anaylzer being too close to a wifi source
> Below shows this on channel 132,
@LISTSERV.EDUCAUSE.EDU
Subject: Re: [WIRELESS-LAN] 2.4 GHz Interference
Still learning my way through signatures but I have been caught out before
with the anaylzer being too close to a wifi source
Below shows this on channel 132, using iperf for a data burst in the first
image the anaylzer is 1m
@LISTSERV.EDUCAUSE.EDU] On Behalf Of Chuck Enfield
Sent: Thursday, 9 March 2017 9:13 AM
To: WIRELESS-LAN@LISTSERV.EDUCAUSE.EDU
Subject: Re: [WIRELESS-LAN] 2.4 GHz Interference
The behavior of your radio could vary. If you’re associated at 2.4GHz the
channel would be based on the AP you’re
@LISTSERV.EDUCAUSE.EDU
Subject: Re: [WIRELESS-LAN] 2.4 GHz Interference
Just curious, but if my Surface was the cause of the problem and I always
used the same set-up for the Wi-Spy, wouldn’t I always see this signature?
This is something that seems to occur quite randomly so far.
From: The EDUCAUSE
@LISTSERV.EDUCAUSE.EDU] On Behalf Of Jake Snyder
Sent: March-08-17 2:21 PM
To: WIRELESS-LAN@LISTSERV.EDUCAUSE.EDU
Subject: Re: [WIRELESS-LAN] 2.4 GHz Interference
Try putting your laptop in airplane mode. My guess is the SpecAn is in very
close proximity to the laptop. That horizontal slope
S-LAN@LISTSERV.EDUCAUSE.EDU] On Behalf Of Jake Snyder
> Sent: March-08-17 1:30 PM
> To: WIRELESS-LAN@LISTSERV.EDUCAUSE.EDU
> Subject: Re: [WIRELESS-LAN] 2.4 GHz Interference
>
> Are you using a USB 3.0 hub?
>
>
> On Mar 8, 2017, at 1:23 PM, Jason Heffner <jdh...@psu.edu&
Nope, the spectrum analyzer is going directly into a Surface Pro 2.
From: The EDUCAUSE Wireless Issues Constituent Group Listserv
[mailto:WIRELESS-LAN@LISTSERV.EDUCAUSE.EDU] On Behalf Of Jake Snyder
Sent: March-08-17 1:30 PM
To: WIRELESS-LAN@LISTSERV.EDUCAUSE.EDU
Subject: Re: [WIRELESS-LAN] 2.4
SS-LAN@LISTSERV.EDUCAUSE.EDU
Subject: RE: [WIRELESS-LAN] 2.4 GHz Interference
Hi Chuck,
I'm going to run the spectrum analyzer on a different client to rule out
NIC issues. Now you mention it we do have a couple of old Proxims, that
should have been powered off a long, long time ago as they are no
: March-08-17 1:05 PM
To: WIRELESS-LAN@LISTSERV.EDUCAUSE.EDU
Subject: Re: [WIRELESS-LAN] 2.4 GHz Interference
Hi Sean,
Are all of your APs and Wi-Fi NICs in the area working properly? That plateau
at -20dBm (see image) is almost certainly from an nearby OFDM source on channel
1
Of Jeremy Gibbs
Sent: March-08-17 12:37 PM
To: WIRELESS-LAN@LISTSERV.EDUCAUSE.EDU
Subject: Re: [WIRELESS-LAN] 2.4 GHz Interference
Are there any common items near APs? Such as a light with a ballast? You tend
to see A LOT of stuff on 2.4, especially if you're in a more urban environment
Are you using a USB 3.0 hub?
> On Mar 8, 2017, at 1:23 PM, Jason Heffner wrote:
>
> I’ve seen something similar when running some of the older Cisco controllers.
> If you ruled out everything else and are starting to look for devices causing
> interference I'd check out some
I’ve seen something similar when running some of the older Cisco controllers.
If you ruled out everything else and are starting to look for devices causing
interference I'd check out some of your wireless mic systems. We had some
800Mhz that we had to salvage that were causing harmonic
18 matches
Mail list logo