Re: [wsjt-devel] Waterfall stops on Raspberry Pi

No, actually no specific conditions. I just install the deb-package and run the program basically. And again, I first experienced this problem on a Raspberry Pi, running Raspberry Pi OS, with a USB-audio-dongle. But then I got it also on my stationary machine with

Re: [wsjt-devel] Waterfall stops on Raspberry Pi

Hi Daniel, Is there a specific set of steps that reproduces this? I am not set up to tx that way, but I could switch to motherboard audio and try to reproduce it. al wb1bqe Sent from BlueMail On Aug 23, 2022, at 10:41, "Daniel Uppström via wsjt-devel" mailto:wsjt-devel@li

Re: [wsjt-devel] Waterfall stops on Raspberry Pi

Well, no, since I am using motherboard audio on the Mint machine, that is not on USB. But I notice that when I try to end the program, after this problem has arisen, it closes the windows but does not stop the wsjtx process. So something is preventing something to

Re: [wsjt-devel] Waterfall stops on Raspberry Pi

I have been running the 2.6 beta on a freshly built mint laptop for a while now with no issues. Does the output of lsusb change between when you start, and after the problem happens? al WB1BQE Sent from BlueMail On Aug 15, 2022, at 09:51, William Smith via wsjt-devel mail

Re: [wsjt-devel] Waterfall stops on Raspberry Pi

Actually I don't even have to transmit. If I click to disable "Monitor" and then click again, this button again lights up in green but the waterfall does not start and there is nothing decoded. But the seconds indication down to the right (0-15/15 in FT8 etc) stil

Re: [wsjt-devel] Waterfall stops on Raspberry Pi

I have both tried with an USB soundcard on RBPi and on my stationary machine. On the latter I have the same problem also with motherboard audio. This autosuspend seems only to apply for USB. When the waterfall (and any reception) has stopped in WSJT-X I c

Re: [wsjt-devel] Waterfall stops on Raspberry Pi

Wow, classic signs of RFI, but not without a transmitter. 8*) Next guess would be power supply? Or overheating? 73, Willie N1JBJ > On Aug 15, 2022, at 7:58 AM, Daniel Uppström via wsjt-devel > wrote: > > Hi all, > I still experience this problem, described below. Now tested on WSJT-X v2.5.4

Re: [wsjt-devel] Waterfall stops on Raspberry Pi

What does your audio chain look like? Have you tried disabling autosuspend? set autosuspend=-1 https://docs.kernel.org/driver-api/usb/power-management.html Mike W9MDB On Monday, August 15, 2022 at 07:05:11 AM CDT, Daniel Uppström via wsjt-devel wrote: Hi all, I still experience

Re: [wsjt-devel] Waterfall stops on Raspberry Pi

On 8/15/22 14:23, Steve Platt wrote: On 15 August 2022 13:58:25 CEST, "Daniel Uppström via wsjt-devel" wrote: Hi all, I still experience this problem, described below. Now tested on WSJT-X v2.5.4 under Lin

Re: [wsjt-devel] Waterfall stops on Raspberry Pi

On 15 August 2022 13:58:25 CEST, "Daniel Uppström via wsjt-devel" wrote: > Are you using the same audio device for Rx and for Tx? EG using "pulse" for both? I have found that doing so gives the results you describe; also that one of the threads goes into a loop so that you have to kill the pr

Re: [wsjt-devel] Waterfall stops on Raspberry Pi

Hi all, I still experience this problem, described below. Now tested on WSJT-X v2.5.4 under Linux Mint. Waterfall stops updating after TX. Without any radio connected at all. So not an RFI issue. Am I the only one that has seen this problem? Tha

Re: [wsjt-devel] Waterfall stops on Raspberry Pi

Thank you for several suggestions about RFI, but unfortunately it is not. I get the same result without any radio connected whatsoever. Daniel SM6VFZ On 9/25/21 11:27 AM, Alan via wsjt-devel wrote:

Re: [wsjt-devel] Waterfall stops on Raspberry Pi

Hi, while that may work it's in my view better to find the source of any RFI and get rid of it. You never know what else it might be doing! Try the setup on a dummy load and if it's then OK look at the antenna/feeder arrangement. Alan G0TLK, sent from my mobile device On 24 September 2021 23

Re: [wsjt-devel] Waterfall stops on Raspberry Pi

Hi Daniel, Sounds like RF from your own transmissions is getting through to the RasPi and disabling the USB-ports. Installing snap-on ferrites to both ends of the USB-cables, Raspi power-wire and any other possible connections might help. On 25.9.2021 1:19, Bill Somerville via wsjt-devel wrote:

Re: [wsjt-devel] Waterfall stops on Raspberry Pi

Hi Daniel, Sounds like RF from your own transmissions is getting through to the RasPi and disabling the USB-ports. Installing snap-on ferrites to both ends of the USB-cables, Raspi power-wire and any other possible connections might help. On 25.9.2021 1:09, Daniel Uppström via wsjt-devel wrote:

Re: [wsjt-devel] Waterfall stops on Raspberry Pi

On 24/09/2021 23:09, Daniel Uppström via wsjt-devel wrote: Hi, On my Raspberry Pi 3 32 bit I get WSJT-X to stop the waterfall in FT-8 mode after I initiate a transmission. When the program starts the waterfall shows the FFT data as it should so I don't think this is a performance issue. But wh