-
From: Glenn Williams via wsjt-devel [mailto:wsjt-
de...@lists.sourceforge.net]
Sent: Saturday, January 27, 2024 1:12 AM
To: wsjt-devel@lists.sourceforge.net
Cc: Glenn Williams
Subject: Re: [wsjt-devel] wsjt-devel Digest, Vol 119,
Issue
45
So,
Do you mean that a priori information is used
Message-
From: Glenn Williams via wsjt-devel [mailto:wsjt-
de...@lists.sourceforge.net]
Sent: Friday, January 26, 2024 6:43 PM
To: wsjt-devel@lists.sourceforge.net
Cc: Glenn Williams
Subject: Re: [wsjt-devel] wsjt-devel Digest, Vol 119,
Issue
45
I am reporting here another issue with my TX5S QSO
I am reporting here another issue with my TX5S QSO and the FT8 windows
that happened last night. (Previous report is under "Subject:
[wsjt-devel] skips RX frequency window (bug?) wsjtx-2.7.0-rc3".) I am
also NOT confirmed in ClubLog!
My screenshots with iPhone are in
So,
Once upon a time I asked a question and the gurus had an answer (V2.2.2
I think).
My question was about "how does FT8 keep huge files open and still keep
up with the band activity while updating huge files". Today's question
is about that. ALL.TXT has grown really large. Is there a
V 2.7.0-rc3
Last night worked FT8 F/H with TX5S 80m. Rig TS590SG, PC Win 10. (This
has happened once or twice before.) His S/N report on me popped up in
Band Act window after my TX1, but no report in RX Freq window. TX3
completed OK in both Windows. I use COLORS and so red was instantly
ST4-120 is about the same as for
WSPR. For longer transmission periods transmitter
frequency stability requirement is higher as the used
bandwidth goes down. See user guide 17.2.10. Summary. Of
course the (un)stability of the propagation path on 160m
band may prevent usage of the slowest modes.
Hello,
FT8 on 160m pales.
WSJT-X operators customarily running FT8 and FT4 on 80m through 10m HF
bands are likely disappointed with trials on 160m. As one of those
operators I recently ran WSPR on 160m in comparison to working FT8 QSOs
on 160m. In NA EST daytime operation at 2220Z WSPR
This is a theory question. There is a bit of FT8 on 160m. Does use of a
Beverage Antenna to get more signal raise the S/N value? Would that
antenna help with receiving weaker signals (a variation of that S/N
question)?
--73, Glenn, AF8C
--
This email has been checked for viruses by Avast
Today I had a case where the blue-ish "Decode" button was stuck on
during one 15 second TX cycle. I have never seen that before or since.
V2.6.1, Win 10.
--73, Glenn, AF8C
--
This email has been checked for viruses by Avast antivirus software.
www.avast.com
Hi,
The following line of text is found once in my huge ALL.TXT file. Note
the "a4" far to the right.
V2.6.1 Windows 10 USB-USB to TS590SG DATA port, Special Op F/H, Split->Rig
"231005_00530024.911 Rx FT8-20 0.0 720 AF8C RR73; NR4N
-14 a4"
The following 2 lines of
Hi,
Why not be concerned about your password on QRZ.COM? If that gets
hacked by someone they have access to a huge database of names and
addresses to pick through.
Password security is well described in:
12 character passwords are no longer safe enough. That's it. Done. All
over. Tell
PSKReporter should be running in the same computer as WSJT-X? !!
--73, Glenn, AF8C
On 9/15/2023 1:04 PM, Mike Black W9MDB via groups.io wrote:
If you have a recent version of WSJTX (like RC2) we would appreciate you
turning on PSKReporter to support the upcoming solar eclipse Oct 14th.
If
Hello,
Comment: The following Human Induced confusion of VFO frequency occurs
on FT8 shutdown. Not necessarily a "bug" in WSJT-X. Just thought
I would send out the information.
Setup: Windows 10, Kenwood TS590SG, USB cable driven, both WSJT-X 2.6.1
and 2.7.0-rc2. Bands: at least on HF bands.
r settings. As it is
intended to be read by the program, it is not easy to interpret by humans,
but in most cased useful.
73, Reino OH3mA
-Original Message-----
From: Glenn Williams via wsjt-devel [mailto:wsjt-
de...@lists.sourceforge.net]
Sent: tiistai 13. kesäkuuta 2023 2.44
To: wsjt-devel@lists.sourcefo
Is there any log file that records changes in settings? Such could be
useful for tracking down reasons for unexpected operational failures and
surprises.
--73, Glenn, AF8C
--
This email has been checked for viruses by Avast antivirus software.
www.avast.com
Hi Dennis,
I can test with this if you need help with this combination: Windows 10
22H2, Kenwood TS590SG, USB cable controlled. Do you need more specifics
on Version numbers of anything?
So far I have had no hamlib trouble with this combination with 2.2.2,
2.5.4, 2.6.1.
--73, Glenn, AF8C
Hereby making a suggestion:
During the moment when the version of WSJT-X has been downloaded and the
next step is taken, which is executing the particular file
wsjtx-x.y.z-winNN.exe, why not first open a list of questions that must
all be answered with "Y" or "Yes" before it will install\?
Hello,
Setup: FT8 V2.6.1, Windows 10, Kenwood TS590SG operated via USB cable.
Time/Date: Last night, thinking about changing TX6 to specifically call
3C3CA with a CQ.
So we know that "CQ DL AF8C EN81"
WILL be transmitted if I modify TX6 and call CQ for Germany,
However attempting to use "CQ
I am the person who started this thread.
I was preparing some useful test data on splits to this thread.
So I will not send it. I don't want to cause more trouble.
--73, Glenn, AF8C
On 5/8/2023 1:41 PM, Conrad PA5Y via wsjt-devel wrote:
I have to say that this is possibly to most tedious and
button? Then re-enable xmit by hitting the Enable Tx for the next
sequence you want to xmit. After all you are the control operator for your
station. Also then no changes to the code need to be made.
Fred
N2XK
On Apr 27, 2023, at 12:19 PM, Glenn Williams via wsjt-devel
wrote:
Good Day,
FT8/4
Good Day,
FT8/4 enhancement suggestion follows.
(I know that stable code can be broken by side effects and "better is
the enemy of good enough".)
For example, with FT8, instead of having two 15 second transmission
cycles per minute, it would be nice to have the option of ONE 15 second
This could be considered as a "panic" situation: Sourceforge is not
going to be a reliable long term host for the amateur radio community.
I attempted a 2.6.1 win64 download and a 2.5.4 win64 download and both
resolve to some "Cardinal AOSP" page. This isn't just a one broken link
problem.
Quoting "take any explicit action required."
The ALL.txt file is available to scan through with a simple
DOS batch file. You want a low overhead scanner.
With POWERSHELL there's a cmdlet Start-Sleep.
"The Start-Sleep cmdlet suspends the activity in a script or
session for the specified
To quote:
"Versions of WSJT-X labeled with a "-rcx" suffix, for example WSJT-X
v2.2.0-rc6, are Release..."
While v2.2.0 is an example, you could update that to
"Versions of WSJT-X labeled with a "-rcx" suffix, for example WSJT-X
v2.#.#-rc6, are Release..."
-73, Glenn, AF8C
--
This email
, 2023 at 04:35:31 PM CST, Glenn Williams via wsjt-devel
wrote:
Hello Michael,
Before I would commit to this I would need lots more information.
If someone volunteers for this then drop me out instantly!
Are you a one man group or do you have helpers? Surely there should be
some hotshot
Today 2.6.1 was used:
RIG: TS590SG with USB cable, Dell laptop, Windows 10
Operation has been almost flawless with almost all versions used since
2.2.2. However, today with 3D2USU on 30m he sent me his TX4 "RRR 73"
and my side continued and re-sent another TX3 ignoring the TX4. As far
Hello Michael,
Before I would commit to this I would need lots more information.
If someone volunteers for this then drop me out instantly!
Are you a one man group or do you have helpers? Surely there should be
some hotshot developers who are hams and who could take this on!
How many lines
Hi All,
I use Meinberg NTP with Windows 10. About two weeks ago with V2.6.1, I
do NOT remember if it was with 3Y0J, I found that my FT8 RX DECODE
matched the required time line position, about 13-14.9 seconds after the
beginning of the correct period (I believe it was EVEN). But at the
Perhaps there "needs to be" some world wide FT8 beacon stations on 24/7,
where the beacons are known to have accurate time. WSJT-X, upon the
operator tuning to the beacon(s), can report a time difference error, or
perhaps even resync the local clock to the beacon in lieu of WWV's or
CHU's etc.
Oh,
An HTML version is fine. That's all you ever had with V2.2.2 and a
couple after that.
My opinion is just that. The leaders can decide.
--73
On 1/1/2023 10:20 AM, Reino Talarmo via wsjt-devel wrote:
But this does not solve the problem in the cases of:
1) I'm not on that computer or
But this does not solve the problem in the cases of:
1) I'm not on that computer or even in the shack, or maybe I am in a
meeting or someplace where suddenly I need to obtain the User Guide. I
can get to the website but I can't get to the shack computer.
2) Similarly I am on my smartphone
Hello,
Am I horribly out of date? I am running v2.6.0-rc5 with no problems so far.
But in the "standard" WSJT-X Princeton website for downloading versions,
the latest User Guide is marked as v2.5.4. Not so bad an issue for that
version by itself. Except, all English User Guide (pdf and
I thought I remembered something about USB ports.
I googled: "windows 10 USB ports randomly stop working"
and got
"Go to Power Options > Change Plan Settings > Change advanced power
settings. Find USB Settings, then drill down to USB selective suspend
setting. Disable the options next to
in case it's useful. They started while I was
running v2.5.3 by the looks of it.
Alan G0TLK
On 06/11/2022 15:02, Glenn Williams via wsjt-devel wrote:
I am sending this to the developers list because it seems to be too
detailed and too specific to only one type of rig to warrant sending
I am sending this to the developers list because it seems to be too
detailed and too specific to only one type of rig to warrant sending to
the general [WSJTX] reflector. --de AF8C, Glenn
HARDWARE/SOFTWARE CONFIGURATION
Version 2.5.4
Windows 10
Cabled via USB only to a Kenwood TS590SG.
Do
35 matches
Mail list logo
