On Wed, 15 Jan 2003, Mike A. Harris wrote:
For the last few XFree86 releases, the beforelight screensaver
has been nonfunctional if ran with the XFree86 core server.
[mharris@asdf mharris]$ beforelight
X Error of failed request: BadValue (integer parameter out of
range for
operation)
(WW) INVALID MEM ALLOCATION b: 0xe400 e: 0xe4ff correcting
(EE) Cannot find a replacement memory range
This looks like a problem with your motherboard bios. Try
flashing a newer bios on it. Windows can probably do a better
job of resolving conflicts than XFree86 can.
On Fri, 17 Jan 2003, Peter Finderup Lund wrote:
On Thu, 16 Jan 2003, Mark Vojkovich wrote:
From what I've seen, most segfaults with the last official release
are due to bugs in the font renderers, or maybe just in the font
server. You could try explicitly putting font paths
On Fri, 17 Jan 2003, Peter Finderup Lund wrote:
On Fri, 17 Jan 2003 [EMAIL PROTECTED] wrote:
just connecting and throwing /dev/urandom on it until xfs closed the
connection or crashed. Once it was running without problems for more than
3 days I gave up.
Brilliant!
I'm wondering
On Sun, 19 Jan 2003, adam wrote:
on Sun, Jan 19, 2003 at 03:45:05PM +0100, Peter Finderup Lund wrote:
On Sun, 19 Jan 2003, Mike wrote:
Regarding: Nvidia Geforce2Go: autodetects 1400x1050 LCD, then refuses to use it
(hysnc out of range)
Sounds like the specs are entered incorrectly
On Tue, 21 Jan 2003, sergey korolev wrote:
I'got problem after playing with graphical option and can not restore
Xserver.
Your modules are mixed up. You are running the nv driver that
came with XFree86 but you are loading the glx module from NVIDIA's
binary drivers. The nv driver that
On 26 Jan 2003, Anja Tekelenburg wrote:
Dear sirs,
I hope someone can help me. Whenever I use OpenOffice (Mandrake 9.0) my
screen turns black and I can login again. I don't know why. What can be
wrong. I have the same installation (Mandrake 9.0 with OpenOffice) on an
other computer and
Sorry. This is a test. I'm subscribed yet it appear to not be
getting most of the mail sent to this list.
Mark.
___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86
On Thu, 30 Jan 2003, Leonard Monk wrote:
Does the nv driver in XFree86.4.2.1 support DVI connection to a
digital flat panel?
No. You need to run one of the 4.2.99.x snapshots.
I can't get nv to work yet with a Planar PV174, and the option
ConnectedMonitor DFP is said to be ignored
On Mon, 27 Jan 2003, Sacha Taleb wrote:
Hi,
my name is Sacha. and i was installing RedHat 8.0 and it finished. then when
i finished the installation i wanted to boot into linux (i ahve win xp on
one partition and linux redhat 8.0 on the other). Anyways, when i booted
into linux the
On Mon, 27 Jan 2003, P.B.Prabhuram wrote:
I am using a linux-from-scratch system, I downloaded
all the
sources for xf86 4.2.0 and installed them correctly
with symlinks and with correct entries in ld.conf etc.
I configured the x system using xf86config, ( i have a
nvidia riva tnt2 card
On Sun, 26 Jan 2003, Hans Öfverbeck wrote:
Hi,
julius wrote:
hi
xinerama works fine, just some applications wont run / no fullscreen mode.
xine in full screen mode plays sound but no video, in the error mess it says that
theres no Xv compactibility ???
i use an older s3 and a gf2 card,
On Sat, 25 Jan 2003, kate lee wrote:
Could not init font path element unix/:7100, removing from list!
Fatal server error:
could not open default font 'fixed'
Your XF86Config file specifies that a font server should be
used, yet one isn't running. Run xfs.
The nv driver in 4.2.0 didn't support flat panels. Run one of
the 4.2.99.x snapshots and put:
Option FlatPanel
in the Section Device.
Mark.
On Fri, 31 Jan 2003, David Shifflett wrote:
Thanks for the help.
I added that option to my Monitor Section.
Where
On Sat, 1 Feb 2003, Mike A. Harris wrote:
The following bug has been reported to me in bugzilla, and the
person has narrowed it down to a couple of 2D accel primitives.
I've made these disabled by default for now as a quick
workaround, but I thought I'd mention it on the list to see if
On Sun, 2 Feb 2003, George FernandeZ wrote:
Hi, ive been getting this weird error with XFree86. im pretty sure its because
of the monitor but since im kinda new to linux i dont really know how to fix
it. First, i had Xfree 4.1 or something. then i downloaded the latest one and
upgraded to
On Sun, 2 Feb 2003, Ramachandran` wrote:
Machine Compaq Evo D315
Monitor VGA 15
PROCESSOR : AMD Athlon^(TM) XP processor 1800+1
CHIPSET : NVIDIA® nForce^(TM) chipset with TwinBank^(TM) Memory
architecture,DASP preprocessor, AMD Hypertransport^(TM) I/O bus
delivering throughput speeds up
Try a gtf-based modeline generator like gtf in the XFree86 4.3
prerelease snapshots. Trying that, I get:
# 1152x864 @ 100.00 Hz (GTF) hsync: 91.50 kHz; pclk: 143.47 MHz
Modeline 1152x864_100.00 143.47 1152 1232 1360 1568 864 865 868 915 -HSync
+Vsync
Put:
Option XaaNoScanlineCPUToScreenColorExpandFill
In the Section Device of the XF86Config file. If that
solves the problem then this is fixed in the 4.3 pre-releases.
If not then I don't know what the problem is. I saw one other
report of something that sounded similar, but from the
On Fri, 7 Feb 2003, Eric wrote:
Hello,
I'm running XFree86 version 4.2.1 (for OpenBSD) with a release
date of 03 Sep 2002. I'm using an OpenBSD snapshot from 04 Feb
2003. I have a Ge Force 2 MX 100 card and everything starts up
fine. However, the display is extremely dark and
The nv driver only supports flat panels if the text console came
up on it first. That is, it relies on the BIOS to have done some
of the initialization. The nv driver will likely never be able
to initialize a flat panel that the BIOS hasn't POSTed to. So if
you didn't boot to the panel, the
This card is not supported by the 4.2 release so -configure
won't work on it (4.2 is over a year old). Upgrade to the 4.3 snapshot
on ftp.xfree86.org.
Mark.
On Mon, 10 Feb 2003, [EMAIL PROTECTED] wrote:
OK so this seems to be a SUPPORT issue.
The following was
On Tue, 11 Feb 2003, Egbert Eich wrote:
Widiarto writes:
Hi all,
I wonder how many VGA adapter that XFree86 server can handle to use multi head
monitor? I've already tried 4 and it work!.. I wanna try more than 4 but my
motherboard only have 4 PCI :((.
I see on the website there
On Mon, 10 Feb 2003, [iso-8859-2] Gaskó Mátyás wrote:
I'm not sure I'm writing to the right address. I have a question about X. I've a
GeForce4 video card but my x server can't use it. Which X should I download and from
where to be able to use it? Or do you know the address to write to with
and GeForce4 Ti
cards.
Mark.
On Mon, 10 Feb 2003, Mark Vojkovich wrote:
Put:
Option XaaNoScanlineCPUToScreenColorExpandFill
In the Section Device of the XF86Config file. If that
solves the problem then this is fixed in the 4.3 pre-releases.
If not then I don't
When I was back at VA Linux Systems I remember an engineer showing
this to me on the mga driver. That was years ago! I may even have
posted something to the list about it. I remember not being able to
figure it out how that could happen.
Mark.
On Thu, 13 Feb 2003
On Thu, 13 Feb 2003, Andrey A.Panov wrote:
Hi,
Please help. Where I can find info about this problem?
1) Upgrade to one of the XFree86 4.2.99.x snapshots available on
ftp.XFree86.org. That card is newer than any official XFree86
releases and isn't supported by them.
2) You
If rect500 and copywinwin500 both drop I would say your clocks are
lower now than they were before. If only rect500 drops and not
copywinwin500, I would say you lost block mode fills (SGRAM special
features aren't being used anymore - It's treating the card like
a dumb SDRAM card). It could
On Fri, 14 Feb 2003, pura life CR wrote:
Hi, I have a Dell inspiron 2650 running FreeBSD 4.7-stable.
The machine has a NVidia GeForce 2 Go video card.
I would like to know if that hardware runs on XFree86 4.2.1 and how can I
configure? Can anyone please send me a config file similar?
The
What version is your
xc/programs/Xserver/hw/xfree86/drivers/nv/nv_setup.c ?
1.27 is the newest version and has BigEndian fixes in it.
I recommend that you use offb instead of rivafb. And you
shouldn't need the 'novideo' option.
Mark.
On Fri, Feb 14, 2003 at
On Mon, 17 Feb 2003, Washington, Brandt E, SALES wrote:
Xfree86,
I have bee trying for two weeks now to get my Dell Inspiron 8000 laptop working. I
read many internet sites about this issue. It seems to be a problem. I haven't yet to
get anything to work. I attached the log and the
On Mon, 17 Feb 2003, picus wrote:
Hello !
I've got a Gforce2 Mx 64Mb and a monitor TM3401 but X doesn't want to start.
I try to install a Slackware 8.1but it works good with a Mandrake 9.0.
Join the log.
I think that card was supported in that release (was so long ago,
it's hard
Minor opcode 19 is XvShmPutImage. BadAlloc on that request usually
means there's not enough video ram for the overlay buffers. Maybe if
you don't use the DRI (which, if I recall correctly, steals video ram
for 3D) you will have enough memory?
Mark.
On Tue, 18 Feb
On Thu, 20 Feb 2003, Jeremy D'Inverno wrote:
You are using the nv driver that comes with XFree86 yet
you are trying to load the glx module from NVIDIA's binary drivers.
If you want to use the nv driver that comes with XFree86
then uninstall NVIDIA's drivers, in particular, remove NVIDIA's
On Thu, 20 Feb 2003, J. Russell wrote:
Dear Sirs,
I have supplied the log file that was created when I tried to startx at the
prompt on Linux 8.0. Please advise. Thank you.
John Russell
http://marc.theaimsgroup.com/?l=xfree86m=104569890514319w=2
Except that card probably doesn't
Your XF86Config file says to use a font server, yet one doesn't
appear to be running. Run xfs or put a font path in the Section Files
of the XF86Config. eg.
FontPath /usr/X11R6/lib/X11/fonts/misc:unscaled
FontPath /usr/X11R6/lib/X11/fonts/75dpi:unscaled
FontPath
The nv driver that comes with XFree86 didn't support DVI
in any official XFree86 release, but it will be supported in 4.3.
Upgrade to one of the 4.2.99.x snapshots on ftp.xfree86.org and
put Option FlatPanel in the Section Device of the XF86Config.
Mark.
On Fri, 21
There are no known bugs, just documented limitations. It's probably
a configuration issue. Did you use the Option FlatPanel as described
in the man page? You may need to fool with the CrtcNumber too.
Mark.
On Fri, 21 Feb 2003, gino rossen wrote:
Regarding: nv
On Fri, 21 Feb 2003, [iso-8859-1] Neil Murray wrote:
Hi,
Just tried to install RH Linux 7.0 for the 1st time.
Unsurprisingly, had a problem post-install with
configuring X-Windows. I think this is due to my
graphics card (a nVidia GEForce2 Ultra 64Mb). My
machine spec is 1200MHz Athlon,
On Sat, 22 Feb 2003, Luiz Guilherme Regis Emediato wrote:
Hi,
I am having the following error, in the attachment: XFree86.0.log,
after running:
XFree86 -configure
Version is 4.1.0 (Glibc2.1) installed on RedHat 6.2 Kernel 2.2.16-3.
It gives core dump from configure option
Looks like a partial upgrade and the modules are mismatched.
Check the compiled for messages in the /var/log/XFree86.0.log
file. All the modules should be the same version as the server.
Mark.
On Sat, 22 Feb 2003, neotrace gentoo wrote:
hi i got a problem like
On Sun, 23 Feb 2003, Paras pradhan wrote:
hi all
I am getting error like this when i tried to startx.
how can i fix the problem.. previously it was working fine but after
installgin a package named indix my problem started.i dunno what it has
changed to my configuraiton. how do i recover
On Tue, 25 Feb 2003, David Dawes wrote:
On Mon, Feb 24, 2003 at 02:30:25PM -0700, Marc Aurele La France wrote:
On 24 Feb 2003, Nat Ersoz wrote:
While tracking down a bug, I encoutered these functions in:
programs/Xserver/hw/xfree86/vgahw/vgaHW.c:
void vgaHWLock(vgaHWPtr hwp)
{
Config file paths are listed in the /var/log/XFree86.0.log. eg:
(==) Using config file: /etc/X11/XF86Config
though it's often XF86Config-4 at that same location, but could
be in a couple other places.
Mark.
On Tue, 25 Feb 2003, sean fatourchi wrote:
Doctor,
GeForce4 support wasn't added until after last official XFree86
release and will be new to 4.3 when it is released. Upgrade to one
of the 4.2.99.x snapshots on ftp.XFree86.org.
Mark.
On Tue, 25 Feb 2003, [iso-8859-1] zap wrote:
Hi,
I just installed Linux Red
On Wed, 26 Feb 2003, Mak wrote:
Hello, i've been using redhat 8.0 for about a month and a half now to administrate
and sudenly when i started the server this morning i got this message (see attached
log file) how can i fix it?
Timothy
Start your font server (xfs).
I don't think this is an XFree86 problem. Perhaps if you disabled
your onboard graphics from within your motherboard bios, that would help.
Sounds like having two video cards in the system is confusing some
configuration application that comes with your Linux distribution.
We can give you advice on setting up the open source drivers that
come with XFree86. Basically, the nv driver that ships with XFree86
didn't support GeForce2 Go until recently. It will work in the upcoming
XFree86 4.3 and in the 4.2.99.x snapshots on ftp.xfree86.org, so you
can get it to
On Fri, 28 Feb 2003, Sebastien Cereze wrote:
Hi everybody,
I checked the graphics card driver list and there's no trace of this card. I guess
it's still not working but can somebody confirm it to me ?
What list are you refering to? GeForce2 Go should work automagically
with 4.3. No
It's not supported with any previous official versions of XFree86.
You need to be running 4.3 or one of the 4.2.99.x pre-4.3
snapshots. It should just work.
Mark.
On Thu, 27 Feb 2003 [EMAIL PROTECTED] wrote:
Hello,
I am with you.
I have the video card GeForce2
Do we have a FAQ? If we have a FAQ, this should be in there.
This comes up twice a day.
Maulik, you need to start your font server (xfs).
Mark.
On 28 Feb 2003, maulik vadera wrote:
Respected Sir,
I have installed Linux 7.1 but before few hours due to
The driver knows nothing about the hotkey switch. It doesn't
even have a way to know that a switch occurred. It's all done by
the bios which is the only reason the switch even partially works.
Maybe the Font key might change things a little, but the
core of the matter is that hot key
On Sat, 1 Mar 2003, Mark Vojkovich wrote:
On Sat, 1 Mar 2003, William Kucharski wrote:
Manual DPMS commands (e.g. xset dpms force off) worked correctly in XFree86
4.2.0 but no longer work in 4.3.0; instead the screen blanks but the monitor
does NOT enter DPMS poweroff mode.
The nv
On Sat, 1 Mar 2003, Khaled Al-Jeeran wrote:
hi there ,,,
i have problem with the xf86config ,, my vga card is NVIDIA GeForce2 . and i have
FreeBSD Version 5.0 ..
when i do the config then i try to start the X .. i have errno 61 .. errno 3 ,, bad
display name My.localHost:0
what i should
On 1 Mar 2003, r.sesser wrote:
I've successfully built and installed 4.3 on my Quicksilver (2001) and
everything is working...except the cursor shadow. I've tried enabling it
in the Device section but the log file tells me that option is not
used. I've had this working with 4.2.99.3 without
Did you build this yourself? If so did you mess with any
xc/config/cf/ files? Otherwise it looks like your modules
are messed up. Are you sure /usr/X11R6/lib/modules/drivers/nv_drv.o
is the same version as the server?
Mark.
On Sun, 2 Mar 2003, Sebastian
On Sun, 2 Mar 2003, William Kucharski wrote:
Mark Vojkovich wrote:
I don't actually have an M64, but I have a Vanta and I just tried
it and 4.3 seems to work OK for me. My monitor reports hsync and vsync
both off. Suspend (on/off) and standby (off/on) also are correct.
Can your monitor
though.
If you had an oscilloscope you could verify that hsync and vsync
were indeed going off.
Maybe I could call vgaHWDPMSSet() from NVDPMSSet() and do
both.
Mark.
On Sun, 2 Mar 2003, Mark Vojkovich wrote:
On Sun, 2 Mar 2003, William Kucharski wrote:
Mark
On 2 Mar 2003, r.sesser wrote:
On Sun, 2003-03-02 at 15:31, Mark Vojkovich wrote:
There is no Option CursorShadow.
Oh, well I saw this on some HOW-TO some place.
Then, where has the shadow gone on my cursor?
So you used to have them (in some pre 4.3 CVS) and now you
don't? I
It's not that simple. I have a GeForce4 4xx Go laptop here that
works fine (a Toshiba). Can you tell me the make and model of your laptop?
Also, if your have a font key (the function key that toggles between
full screen and native), can you try hitting that to see if it changes
anything?
Setting the XCURSOR_CORE environment variable to 1 is one way.
There are probably others.
Mark.
On Mon, 3 Mar 2003, Felipe Alfaro Solana wrote:
Hi!
How can I disable the new ARGB cursors in XFree86 4.3.0 and revert to old-style BW
cursors?
My ATI RAGE
that
Fortunately, Mark Vojkovich of the XFree86 core team committed
some patches to CVS to add GeForce2 Go support into the standard
XFree nv driver.
I'm wondering whether this code has ever been part of an XFree86
release, and if so, which one(s)? If not, what's the current status
On Tue, 4 Mar 2003, buddy hasta wrote:
hi, I am buddy from indonesia
i have problem, there are :
__XSERVTransSocketINETCreateListener:
...SocketCreateListener() failed
_XSERVTransMakeAllCOTSServerListeners: server already
running
Fatal server error:
Cannot establish any listening sockets
On Tue, 4 Mar 2003, Peter Osborne wrote:
Hi,
I just installed X 4.3 and I was testing out the resizing functionality. It
works great. I tried out the rotate reflect options and they refused to
work. I have seen screen shots of a rotated KDE. How were these created? Is
this sort of
Your server is too old (2 and a half years). Upgrade.
4.3 is the most recent server.
On Wed, 5 Mar 2003, Chief Penguin wrote:
[...]
(EE) No devices detected.
MArk.
___
XFree86 mailing list
[EMAIL PROTECTED]
On Thu, 6 Mar 2003, Kevin Kuo wrote:
Hi, I have been running X without glx entensions for the longest time
because of this problem, but now I need to have it working. I'm running
this on a FreeBSD 5.0 machine with GeForce2 card. The problem is when I
uncomment the glx line, the server
We need to see your /var/log/XFree86.0.log
On Thu, 6 Mar 2003, Wilkinson wrote:
I am trying to install Red Hat Linux and continue to get a fatal server error
message: no screens found. I am not loading a server, only the workstation and
cannot get beyond this point.
James Wilkinson
It looks like you're just missing the border. I think it defaults
to CopyFromParent, which is a BadMatch if the parent if of a different
depth.
Mark.
On Fri, 7 Mar 2003, Pascual Castellon Gadea wrote:
Hi!
I am trying to create an X Window not using the default
Start your font server (xfs). At this point I think we can only say
that it's a RedHat bug that the XF86Config file they install doesn't
have FontPaths in it. If they are going to rely on a font server,
they should probably make sure it's running.
Mark.
On Sat, 8 Mar
On Sat, 8 Mar 2003, Brian McGrew wrote:
Hopefully, someone can shed some light on this for me!
I'm running RedHat 8.0 with all the latest and greatist patches as of today
(3/8/03).
I have a Belkin OmniView 2 port KVM switch. My Linux box on one port and
WinXP on the other. Switching
On Saturday 08 March 2003 23:00, Daniel Liu wrote:
I've installed Redhat Linux 8.0 three times already and XWindows doesn't
work. It gives me a bunch of errors and brings me to the command line.
I think it might have something to do with my computer having both a
Intel built graphics
It might be a compiler issue. Be careful with your optimizations.
Alternatively, it might an system memory issue. The CopyGC() path
is as old as dirt and I'd be suspicious of claims of a bug in that
code.
Mark.
On Mon, 10 Mar 2003, Scott Gilbertson wrote:
On 10 Mar 2003, D. Rick Anderson wrote:
Man I wish it was something as simple as anti-aliasing.
I tried my little 15 Sony on here, and it looks nice and sharp. I just
don't really want to work on that 15 all day.
What's getting my goat is if I boot into windows 2000 it looks great!
It's
On Mon, 10 Mar 2003, Trever Furnish wrote:
Ok, but how do you force a specific, exact refresh rate? My monitor's
manual lists the exact dot-clock and frequency for each resolution, but
even if I specify only one value for hsync and vsync in XF86Config, the
values xvidtune reports are at
On Tue, 11 Mar 2003, Asim Ajmal wrote:
hello All,
i hope you must be fine. I am Asim Ajmal from Landmark Resources
(www.lmkr.com) Islamabad, Pakistan.
I need some help to capture the screen in linux in .xwd form. I know that
XWD command exist in Linux OS but i need its implementation. i
This doesn't look like an XFree86 error. From the log file
it looks like XFree86 didn't get installed completely - modules
are missing. They're supposed to be in /usr/X11R6/lib/modules.
Mark.
On Tue, 11 Mar 2003, kl365 wrote:
Regarding: XFree package installation
On Tue, 11 Mar 2003, Maarten Hilgenga wrote:
Mark Vojkovich wrote:
On Fri, 7 Mar 2003, Maarten Hilgenga wrote:
Hi all,
after doing an online update, a software package called abaqus is unable
to display any graphics because the glx module is missing. I found out
the update
From your description of the problem it sounds like the Virge
driver isn't setting its RAC flags correctly. Perhaps you could
try XFree86 4.3 to see if it works better there? If not, maybe
a motherboard bios upgrade might help.
Mark.
On Wed, 12 Mar 2003, Paulo
In both cases do you get the message about the Truncating PCI BIOS?
There was a similar post earlier today. I'm wondering if the int10
module has been broken somehow. Since you have old cards, you might
try this with XFree86 4.2 to see if this is a regression.
Mark.
I've never seen this. Did you build this yourself? This isn't
built with some bleeding-edge tool chain is it? To me it looks more
like an incompatibility with your libc or something like that.
Mark.
On Tue, 11 Mar 2003, Superuser wrote:
The module loader seems to
On Wed, 12 Mar 2003, Pranay Kumar wrote:
Hi all,
All I need to do is to playback video that is grater than 1920 in width
(specifically 2048). Need suggestions on which video card can do it. Xv
support on most cards seem to be limited to to 1920. I have tried ati
cards (radeon,8500/9700)
I've seen a couple of these reports now, where 4.3 reports
Truncating PCI BIOS Length with multihead configurations and
doesn't work. I just tried two nv cards with 4.3 under Linux
and it worked fine. Perhaps this is specific to FreeBSD? Is
there someone here who knows the int10 code and can
On Fri, 14 Mar 2003, Marc Aurele La France wrote:
On Fri, 14 Mar 2003, Mark Vojkovich wrote:
On 14 Mar 2003, Eric Anholt wrote:
On Fri, 2003-03-14 at 12:31, Mark Vojkovich wrote:
Could someone put the FreeBSD int10 module from 4.3 someplace where I
can get it? I'll give
.
Mark
On Fri, 14 Mar 2003, Mark Vojkovich wrote:
On Fri, 14 Mar 2003, Scott Gilbertson wrote:
The attached small C program causes my Xfbdev server to crash in CopyGC.
Usually it's a SIGSEGV, but sometimes its a SIGILL. When the program
starts, it shows a blank
On Sun, 16 Mar 2003, GoTaR wrote:
Hi!
Setting VideoRam to lowest value than real amount of VRAM is causes:
(WW) NV(0): Failed to set up write-combining range (0xd1f05800,0x400)
(WW) NV(0): Failed to set up write-combining range (0xd1f05000,0xc00)
(WW) NV(0): Failed to set up
I thought that monitor was 1600x1024. At least older ones were.
I know of someone who got the 1600x1024 model working. It used the
same modeline as the SGI flat panel.
Gtf says:
# 1680x1050 @ 60.00 Hz (GTF) hsync: 65.22 kHz; pclk: 147.14 MHz
Modeline 1680x1050_60.00 147.14 1680
On Sun, 16 Mar 2003, Michel Brabants wrote:
Because the nvidia-drivers of nvidia self crash my linux drom time to
time(to my openinion), I'm considering switching back to the
You should disable AGP if you have a flaky AGP chipset.
I've had no problems with the binary drivers and Intel
On Mon, 17 Mar 2003, GoTaR wrote:
On Sun, Mar 16, 2003 at 16:51:33 -0500, Mark Vojkovich wrote:
I want to reduce memory being used in order to use the rest as a
ramdisk.
I don't understand that. What does reducing the amount of
videoram have to do with a ramdisk?
Ramdisk
On Mon, 17 Mar 2003 [EMAIL PROTECTED] wrote:
when using the xfree86 3.3.X series i had no trouble with color allocation
and could easily display xpms in the root window. since upgrading to 4.2.X i am
unable to set a root window image and get many messages about X being unable
to allocate
On Mon, 17 Mar 2003, Frederik Tilmann wrote:
I am using some older applications that use xlib to open up and write
into windows.
They work fine on other X systems (e.g. on SUNs und CDE), and older
versions of
Linux but for new version of XFree 86, the following two problems occur:
-
On Mon, 17 Mar 2003 [EMAIL PROTECTED] wrote:
On Mon, Mar 17, 2003 at 03:08:35PM -0500, Mark Vojkovich wrote:
On Mon, 17 Mar 2003 [EMAIL PROTECTED] wrote:
when using the xfree86 3.3.X series i had no trouble with color allocation
and could easily display xpms in the root window. since
We need to see your /var/log/XFree86.0.log file.
The below information isn't helpful.
Mark.
On Mon, 17 Mar 2003, Michael A.S.G. Joergensen wrote:
Hi,
I have just installed Gentoo GNU/Linux on my computer. I have installed
XFree86 version 4.30.0 When I try to
On Mon, 17 Mar 2003, Scott Gilbertson wrote:
So my new question is, what is there
about the X server that could be affected by the real-time extensions?
Nothing obvious to me. If the server actually segfaulted you
should be able to see why in the debugger. If you can't, then I
think
The permissions on your server are wrong. I haven't really
been paying attention to how this stuff works these days and
there are security implications of doing it incorrectly.
A solution, though undoubtedly the wrong one is to, as root do:
chmod +s /usr/X11R6/bin/XFree
Your server is configured to run a font server yet one is not
running. I think RedHat had a tool ntsysv? that allowed you
to start the font server xfs as well as other services.
Mark.
On Mon, 17 Mar 2003, Krzysztof wrote:
Xfree86.0
compiled for 4.3.0, module version = 1.0.0
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
I hope you have suggestion
Mike
On Mon, 17 Mar 2003, Mark Vojkovich wrote:
We need to see your /var/log/XFree86.0.log file
On Tue, 18 Mar 2003, Stephen L. Fitzhugh wrote:
I installed the XFree86 distribution that came with FreeBSD 4.7. When
starting the X-server, I get an xf86EnableIO error that appears in the
log file below. /dev/io and /dev/mem exist and have root rw permissions.
What am I missing?
If it
there is definitely a regression in the
generic libint10.a module between versions 4.2 and 4.3.
Mark.
On Fri, 14 Mar 2003, Mark Vojkovich wrote:
On Fri, 14 Mar 2003, Marc Aurele La France wrote:
On Fri, 14 Mar 2003, Mark Vojkovich wrote:
On 14 Mar 2003, Eric Anholt
On Wed, 19 Mar 2003, Kok wrote:
Hello!
I can't start X-Window server with my new video card. I've tryed to reinstall
FreeBSD, but nothing happened... Please help me!
This doesn't look like it crashed in the driver. Looks like it
crashed in the core server somewhere. Perhaps you
On Wed, 19 Mar 2003, krynhells amd wrote:
I need of help, my server no start, those are my configuration files,
I thank the attention
MESSAGE ERROR
XFree86 Version 4.2.1 / X Window System
(protocol Version 11, revision 0, vendor release 6600)
Release Date: 3
1 - 100 of 2228 matches
Mail list logo
