Jonathan B. Britten wrote:
And one step further: why not boil EIS in the oven? If vigorously
boiled the steam would carry particles/ions of EIS into all the nooks
and crannies of the oven . . .
Boiling is distilling, and that leaves all the silver behind in the pan.
It would be no different than boiling plain water. If you used an
ultrasonic vaporizer, then it would produce a mist with the silver in
it. But do you really want to coat everything with silver, including the
high voltage wiring in the power section. Seems that could result in a
rather explosive catastrophic failure.
Marshall
On Monday, Sep 15, 2008, at 14:04 Asia/Tokyo, Jonathan B. Britten wrote:
Just curious, and not quibbling, but given that this group is devoted
to EIS, why not use that? Might it not be less oxidative?
Taking things one step further: mightn't sunlight do the job? If
one can spray something onto the components, sunlight might also
reach them. I have read that 48 hours of sunlight on PET-bottled
water renders it fit to drink -- the poor man's last-ditch water
purification system.
On Saturday, Sep 13, 2008, at 00:05 Asia/Tokyo, Norton, Steve wrote:
Kathryn,
You should consider Malcolms suggestion about using bleach. It is a
great disinfectant and does dissipate leaving no residue. It
generally isn't used for electronics because it is an oxidant and
can corrode metals but if you dry the microwave in a reasonable time
it should be no problem. One approach might be to:
--
The Silver List is a moderated forum for discussing Colloidal Silver.
Instructions for unsubscribing are posted at: http://silverlist.org
To post, address your message to: silver-list@eskimo.com
Address Off-Topic messages to: silver-off-topic-l...@eskimo.com
The Silver List and Off Topic List archives are currently down...
List maintainer: Mike Devour <mdev...@eskimo.com>