Evening Nina,
I don't question anything you have stated, but I do have a question for
more details.
***Julie, I leave my water and electrodes unattended and always get great
CS. The only time it didn't work out--the silver flaked off and the
electrodes got "feathery" with excess silver flakes--was when the electrodes
were too close to the sides or bottom of the glass container, or touching
it. (This conducts electrical current too fast, which you don't want.)
You bring up a subject which I would call "spacing of electrodes".
I have not read any specifics for this spacing and what to avoid, and what
is the effect of doing this wrong.
I use a 1/8 inch piece or plastic with holes drilled very close to 14 ga
wire diameter. Originally I used a piece of cardboard with holes punched
in it.
If this is a serious problem as you describe above, hopefully you or others
can tell us the details on this exact spacing.
Wayne
--
The silver-list is a moderated forum for discussion of colloidal silver.
To join or quit silver-list or silver-digest send an e-mail message to:
[email protected] -or- [email protected]
with the word subscribe or unsubscribe in the SUBJECT line.
To post, address your message to: [email protected]
Silver-list archive: http://escribe.com/health/thesilverlist/index.html
List maintainer: Mike Devour <[email protected]>
