If it matters, sipxecs uses RFC4235 (dialogue events) for blf. On 9/7/10, Alexey Kanukhin <[email protected]> wrote: > Hello, > > I have found a problem with a BLF feature in Linksys SPA942 IP phone. > I tested BLF feature on sipX versions 4.2.1 and 4.3 (4.3.0-019022 > 2010-09-04T14:32:55 build13), but had no success. When I searched > information about this problem I have found a thread in the "sipx-dev" > mailing list and an issue #XX-7011 in SIPfoundry Issue Tracker > (http://track.sipfoundry.org/browse/XX-7011). I also have found that > SPA942 phone's BLF feature works with 3CX, Brekeke and Asterisk based > PBXs, Broadsoft and Sylantro softswitches. SPA942 phone has special > option (Server Type) for work with various VoIP systems. The Server > Type settings are: Broadsoft, SPA9000, Asterisk, RFC3265_4235 and > Sylantro. > I hope that there is a way to reach compatibility between SPA942 phone > and sipX for successful work with BLF feature. Therefore I have > decided to update an issue #XX-7011. I have attached two sipX > snapshots for two operating modes of SPA942 phone - with the settings > used for work with Asterisk based PBXs and with settings which close > to recommended for manual BLF feature configuration > (http://sipx-wiki.calivia.com/index.php/HowTo_manually_configure_BLF_in_a_phone). > In last case SPA942 phone tries to subscribe to > <sip:~~rl~f~[us...@sipx_ip_address> URI and use RFC3265_4235 as Server > Type. > > I also have attached a file "SPA942-BLF-demo-filtered.pcap" with SIP > messages capture which demonstrates work of BLF feature in SPA942 > phones with Asterisk Server Type mode. Configuration of SPA942 phones > in this case the same, as used for a snapshot with Asterisk based PBXs > (Asterisk is used for Server Type). > > > -- > Sincerely yours, > Alexey Kanukhin > > > > From: Douglas Hubler <dhub...@xxxxxxxxx> > Date: Wed, 28 Jul 2010 01:39:40 -0400 > > On Wed, Jul 28, 2010 at 12:25 AM, Positively Optimistic > <positivelyoptimis...@xxxxxxxxx> wrote: >> However, I'm attempting to get BLF to work on the Cisco/Linksys line of >> phones, and encountering extreme difficulty with BLF. > > Can you elaborate. Are you seeing same issue, phone returns 501 not > implemented? > >> After some digging, >> I discovered that someone had already opened the issue. Is this still a >> known issue? > > You may want to test this on latest test build "sipxecs-4.3.0-testing" > or at least latest stable sipxecs-4.2.1 (if you haven't already) from > http://download.sipfoundry.org/pub/sipXecs/ISO/ > and respond back with your results. > _______________________________________________ > sipx-dev mailing list > [email protected] > List Archive: http://list.sipfoundry.org/archive/sipx-dev/ >
-- Sent from my mobile device ====================== Tony Graziano, Manager Telephone: 434.984.8430 sip: [email protected] Fax: 434.984.8431 Email: [email protected] LAN/Telephony/Security and Control Systems Helpdesk: Telephone: 434.984.8426 sip: [email protected] Fax: 434.984.8427 Helpdesk Contract Customers: http://www.myitdepartment.net/gethelp/ Why do mathematicians always confuse Halloween and Christmas? Because 31 Oct = 25 Dec. _______________________________________________ sipx-dev mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-dev/
