I setup BLF in phone manually. I have tried to use
sip:~~rl~c~[us...@sipdomain URI for a subscription. BLF still doesn't
work. You can see BLF setting in line 518 of file
"SPA942--rl-C--config.xml"
(http://track.sipfoundry.org/secure/attachment/26628/SPA942--rl-C--config.xml).
Should I make a new sipX snapshot for new phone configuration?
--
Sincerely yours,
Alexey Kanukhin
On Tue, Sep 7, 2010 at 4:37 PM, Tony Graziano
<[email protected]> wrote:
> but your subscription uri is not correct. Please try the correct format.
>
> On Tue, Sep 7, 2010 at 8:30 AM, Alexey Kanukhin <[email protected]> wrote:
>>
>> I know that the sipXecs uses RFC4235 for BLF. SPA942 phone also
>> supports this RFC. If you look at a capture file contents
>> ("SPA942-BLF-demo-filtered.pcap" at
>>
>> http://track.sipfoundry.org/secure/attachment/26627/SPA942-BLF-demo-filtered.pcap)
>> you will see that phone can successfully exchange with PBX messages
>> corresponding to RFC4235. Probably, there is a difference in RFC
>> implementation in sipX and SPA942. I have tried to set RFC3265_4235 as
>> Server Type in phone settings, but BLF feature doesn’t work in this
>> case too (look a snapshot
>> "sipx-snapshot-BLF-problem--SPA942-server-type-RFC.tar.gz" at
>>
>> http://track.sipfoundry.org/secure/attachment/26626/sipx-snapshot-BLF-problem--SPA942-server-type-RFC.tar.gz).
>> I hope that somebody from sipXecs developers will find time to study
>> this problem.
>>
>> --
>> Sincerely yours,
>> Alexey Kanukhin
>>
>>
>> On Tue, Sep 7, 2010 at 2:26 PM, Tony Graziano
>> <[email protected]> wrote:
>> > If it matters, sipxecs uses RFC4235 (dialogue events) for blf.
>> >
>> > On 9/7/10, Alexey Kanukhin <[email protected]> wrote:
>> >> Hello,
>> >>
>> >> I have found a problem with a BLF feature in Linksys SPA942 IP phone.
>> >> I tested BLF feature on sipX versions 4.2.1 and 4.3 (4.3.0-019022
>> >> 2010-09-04T14:32:55 build13), but had no success. When I searched
>> >> information about this problem I have found a thread in the "sipx-dev"
>> >> mailing list and an issue #XX-7011 in SIPfoundry Issue Tracker
>> >> (http://track.sipfoundry.org/browse/XX-7011). I also have found that
>> >> SPA942 phone's BLF feature works with 3CX, Brekeke and Asterisk based
>> >> PBXs, Broadsoft and Sylantro softswitches. SPA942 phone has special
>> >> option (Server Type) for work with various VoIP systems. The Server
>> >> Type settings are: Broadsoft, SPA9000, Asterisk, RFC3265_4235 and
>> >> Sylantro.
>> >> I hope that there is a way to reach compatibility between SPA942 phone
>> >> and sipX for successful work with BLF feature. Therefore I have
>> >> decided to update an issue #XX-7011. I have attached two sipX
>> >> snapshots for two operating modes of SPA942 phone - with the settings
>> >> used for work with Asterisk based PBXs and with settings which close
>> >> to recommended for manual BLF feature configuration
>> >>
>> >> (http://sipx-wiki.calivia.com/index.php/HowTo_manually_configure_BLF_in_a_phone).
>> >> In last case SPA942 phone tries to subscribe to
>> >> <sip:~~rl~f~[us...@sipx_ip_address> URI and use RFC3265_4235 as Server
>> >> Type.
>> >>
>> >> I also have attached a file "SPA942-BLF-demo-filtered.pcap" with SIP
>> >> messages capture which demonstrates work of BLF feature in SPA942
>> >> phones with Asterisk Server Type mode. Configuration of SPA942 phones
>> >> in this case the same, as used for a snapshot with Asterisk based PBXs
>> >> (Asterisk is used for Server Type).
>> >>
>> >>
>> >> --
>> >> Sincerely yours,
>> >> Alexey Kanukhin
>> >>
>> >>
>> >>
>> >> From: Douglas Hubler <dhub...@xxxxxxxxx>
>> >> Date: Wed, 28 Jul 2010 01:39:40 -0400
>> >>
>> >> On Wed, Jul 28, 2010 at 12:25 AM, Positively Optimistic
>> >> <positivelyoptimis...@xxxxxxxxx> wrote:
>> >>> However, I'm attempting to get BLF to work on the Cisco/Linksys line
>> >>> of
>> >>> phones, and encountering extreme difficulty with BLF.
>> >>
>> >> Can you elaborate. Are you seeing same issue, phone returns 501 not
>> >> implemented?
>> >>
>> >>> After some digging,
>> >>> I discovered that someone had already opened the issue. Is this
>> >>> still a
>> >>> known issue?
>> >>
>> >> You may want to test this on latest test build "sipxecs-4.3.0-testing"
>> >> or at least latest stable sipxecs-4.2.1 (if you haven't already) from
>> >> http://download.sipfoundry.org/pub/sipXecs/ISO/
>> >> and respond back with your results.
>> >> _______________________________________________
>> >> sipx-dev mailing list
>> >> [email protected]
>> >> List Archive: http://list.sipfoundry.org/archive/sipx-dev/
>> >>
>> >
>> > --
>> > Sent from my mobile device
>> >
>> > ======================
>> > Tony Graziano, Manager
>> > Telephone: 434.984.8430
>> > sip: [email protected]
>> > Fax: 434.984.8431
>> >
>> > Email: [email protected]
>> >
>> > LAN/Telephony/Security and Control Systems Helpdesk:
>> > Telephone: 434.984.8426
>> > sip: [email protected]
>> > Fax: 434.984.8427
>> >
>> > Helpdesk Contract Customers:
>> > http://www.myitdepartment.net/gethelp/
>> >
>> > Why do mathematicians always confuse Halloween and Christmas?
>> > Because 31 Oct = 25 Dec.
>> > _______________________________________________
>> > sipx-dev mailing list
>> > [email protected]
>> > List Archive: http://list.sipfoundry.org/archive/sipx-dev/
>> >
>> _______________________________________________
>> sipx-dev mailing list
>> [email protected]
>> List Archive: http://list.sipfoundry.org/archive/sipx-dev/
>
>
>
> --
> ======================
> Tony Graziano, Manager
> Telephone: 434.984.8430
> sip: [email protected]
> Fax: 434.984.8431
>
> Email: [email protected]
>
> LAN/Telephony/Security and Control Systems Helpdesk:
> Telephone: 434.984.8426
> sip: [email protected]
> Fax: 434.984.8427
>
> Helpdesk Contract Customers:
> http://www.myitdepartment.net/gethelp/
>
> Why do mathematicians always confuse Halloween and Christmas?
> Because 31 Oct = 25 Dec.
>
>
> _______________________________________________
> sipx-dev mailing list
> [email protected]
> List Archive: http://list.sipfoundry.org/archive/sipx-dev/
>
_______________________________________________
sipx-dev mailing list
[email protected]
List Archive: http://list.sipfoundry.org/archive/sipx-dev/
