but your subscription uri is not correct. Please try the correct format.
On Tue, Sep 7, 2010 at 8:30 AM, Alexey Kanukhin <[email protected]> wrote:
> I know that the sipXecs uses RFC4235 for BLF. SPA942 phone also
> supports this RFC. If you look at a capture file contents
> ("SPA942-BLF-demo-filtered.pcap" at
>
> http://track.sipfoundry.org/secure/attachment/26627/SPA942-BLF-demo-filtered.pcap
> )
> you will see that phone can successfully exchange with PBX messages
> corresponding to RFC4235. Probably, there is a difference in RFC
> implementation in sipX and SPA942. I have tried to set RFC3265_4235 as
> Server Type in phone settings, but BLF feature doesn’t work in this
> case too (look a snapshot
> "sipx-snapshot-BLF-problem--SPA942-server-type-RFC.tar.gz" at
>
> http://track.sipfoundry.org/secure/attachment/26626/sipx-snapshot-BLF-problem--SPA942-server-type-RFC.tar.gz
> ).
> I hope that somebody from sipXecs developers will find time to study
> this problem.
>
> --
> Sincerely yours,
> Alexey Kanukhin
>
>
> On Tue, Sep 7, 2010 at 2:26 PM, Tony Graziano
> <[email protected]> wrote:
> > If it matters, sipxecs uses RFC4235 (dialogue events) for blf.
> >
> > On 9/7/10, Alexey Kanukhin <[email protected]> wrote:
> >> Hello,
> >>
> >> I have found a problem with a BLF feature in Linksys SPA942 IP phone.
> >> I tested BLF feature on sipX versions 4.2.1 and 4.3 (4.3.0-019022
> >> 2010-09-04T14:32:55 build13), but had no success. When I searched
> >> information about this problem I have found a thread in the "sipx-dev"
> >> mailing list and an issue #XX-7011 in SIPfoundry Issue Tracker
> >> (http://track.sipfoundry.org/browse/XX-7011). I also have found that
> >> SPA942 phone's BLF feature works with 3CX, Brekeke and Asterisk based
> >> PBXs, Broadsoft and Sylantro softswitches. SPA942 phone has special
> >> option (Server Type) for work with various VoIP systems. The Server
> >> Type settings are: Broadsoft, SPA9000, Asterisk, RFC3265_4235 and
> >> Sylantro.
> >> I hope that there is a way to reach compatibility between SPA942 phone
> >> and sipX for successful work with BLF feature. Therefore I have
> >> decided to update an issue #XX-7011. I have attached two sipX
> >> snapshots for two operating modes of SPA942 phone - with the settings
> >> used for work with Asterisk based PBXs and with settings which close
> >> to recommended for manual BLF feature configuration
> >> (
> http://sipx-wiki.calivia.com/index.php/HowTo_manually_configure_BLF_in_a_phone
> ).
> >> In last case SPA942 phone tries to subscribe to
> >> <sip:~~rl~f~[us...@sipx_ip_address> URI and use RFC3265_4235 as Server
> >> Type.
> >>
> >> I also have attached a file "SPA942-BLF-demo-filtered.pcap" with SIP
> >> messages capture which demonstrates work of BLF feature in SPA942
> >> phones with Asterisk Server Type mode. Configuration of SPA942 phones
> >> in this case the same, as used for a snapshot with Asterisk based PBXs
> >> (Asterisk is used for Server Type).
> >>
> >>
> >> --
> >> Sincerely yours,
> >> Alexey Kanukhin
> >>
> >>
> >>
> >> From: Douglas Hubler <dhub...@xxxxxxxxx>
> >> Date: Wed, 28 Jul 2010 01:39:40 -0400
> >>
> >> On Wed, Jul 28, 2010 at 12:25 AM, Positively Optimistic
> >> <positivelyoptimis...@xxxxxxxxx> wrote:
> >>> However, I'm attempting to get BLF to work on the Cisco/Linksys line of
> >>> phones, and encountering extreme difficulty with BLF.
> >>
> >> Can you elaborate. Are you seeing same issue, phone returns 501 not
> >> implemented?
> >>
> >>> After some digging,
> >>> I discovered that someone had already opened the issue. Is this still
> a
> >>> known issue?
> >>
> >> You may want to test this on latest test build "sipxecs-4.3.0-testing"
> >> or at least latest stable sipxecs-4.2.1 (if you haven't already) from
> >> http://download.sipfoundry.org/pub/sipXecs/ISO/
> >> and respond back with your results.
> >> _______________________________________________
> >> sipx-dev mailing list
> >> [email protected]
> >> List Archive: http://list.sipfoundry.org/archive/sipx-dev/
> >>
> >
> > --
> > Sent from my mobile device
> >
> > ======================
> > Tony Graziano, Manager
> > Telephone: 434.984.8430
> > sip: [email protected]
> > Fax: 434.984.8431
> >
> > Email: [email protected]
> >
> > LAN/Telephony/Security and Control Systems Helpdesk:
> > Telephone: 434.984.8426
> > sip: [email protected]
> > Fax: 434.984.8427
> >
> > Helpdesk Contract Customers:
> > http://www.myitdepartment.net/gethelp/
> >
> > Why do mathematicians always confuse Halloween and Christmas?
> > Because 31 Oct = 25 Dec.
> > _______________________________________________
> > sipx-dev mailing list
> > [email protected]
> > List Archive: http://list.sipfoundry.org/archive/sipx-dev/
> >
> _______________________________________________
> sipx-dev mailing list
> [email protected]
> List Archive: http://list.sipfoundry.org/archive/sipx-dev/
>
--
======================
Tony Graziano, Manager
Telephone: 434.984.8430
sip: [email protected]
Fax: 434.984.8431
Email: [email protected]
LAN/Telephony/Security and Control Systems Helpdesk:
Telephone: 434.984.8426
sip: [email protected]
Fax: 434.984.8427
Helpdesk Contract Customers:
http://www.myitdepartment.net/gethelp/
Why do mathematicians always confuse Halloween and Christmas?
Because 31 Oct = 25 Dec.
_______________________________________________
sipx-dev mailing list
[email protected]
List Archive: http://list.sipfoundry.org/archive/sipx-dev/
