I saw that discussion on the DEV list after I replied... I tend to agree with Martin however in so much that anything designed for the site based routing (or anything else with the system) should not depend on any particular features of a particular phone, gateway or any other 'vendor' solution that isn't an open standard.
That being said, I agree with you and think the Patton can be programmed to what he was asking. Mike > -----Original Message----- > From: Tony Graziano [mailto:[EMAIL PROTECTED] > Sent: Friday, July 11, 2008 8:51 PM > To: Picher, Michael; [email protected]; [EMAIL PROTECTED] > Subject: Re: [sipx-users] Patton gateway and credentials > > I think Robert is curious whether one can have a gateway (he stated FXO > or PRI) "register" to sipx. So "yes" I think it can be done. It might > have something to do with testing an upcoming feature for gateway > selection of something? > > So while I think Patton has that capability, it's raised questions why > a PRI or FXO gateway would need to do that of course. I still think the > answer is yes it can do this, but it does make the configuration a tiny > bit more out of the ordinary. > > Once there is a clear understanding, I can always submit the question > to Patton. > > >>> "Picher, Michael" <[EMAIL PROTECTED]> 07/11/08 19:23 PM >>> > Bob, > > Could you give me a use scenario so I understand what you are trying to > accomplish? > > A secondary login a phone could use if it can't register to the PBX? > > I haven't used the commands Tony highlighted to connect a phone to the > gateway although I believe it can be done. I used the mentioned > configuration to make the gateway login to an ITSP and route calls in > to a sipX server (made it into my B2BUA). > > Mike > > ________________________________ > > From: [EMAIL PROTECTED] on behalf of Robert Joly > Sent: Fri 7/11/2008 11:13 AM > To: [email protected] > Subject: [sipx-users] Patton gateway and credentials > > > > Hi, > I know that there are many Patton gateways users on this mailing list - > I am calling to you. Basically, I'm trying to determine if it is > generally possible to configure SIP credentials (authanme and SIP > password) in a Patton FXO or PRI gateway the same way you can in any > SIP phone today. My goal is to determine if a Patton gateway could be > configured to successfully respond to a challenge from sipX if it ever > saw one. > > Thanks in advance, > bob > _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users
