Nice thorough description, Alan. On Wed, 2009-03-04 at 17:13 -0500, Alan McKay wrote:
> I got 3.10.2 installed no problems now. Setup is another issue. > > I was just about to send this long-ish email about my woes, when on a > whim I tried one more thing and finally have SOMETHING working. But > not well. See below for what lead me up to here as well as details on > my network. But now on a whim I went into my xlite contacts list and > added a contact entry for the other user on the other PC, and entered > his "softphone" entry to be the SipX DN. My 2 xlite phones are 200 > and 201, so each configured on the other in the "contacts" list. > > Now when I right-click on a contact and click "Call", it rings! And I > can answer it on the other end! But the call only stays up for 5 to > 12 seconds, then I'm dead. Also, I still cannot call by entering the > DN directly. Well, the fact that it rings tells you that the registrations are fine. To debug this, you'll need to trace the message flow and see what's going wrong. See: http://sipx-wiki.calivia.com/index.php/Display_SIP_message_flow_using_Sipviewer#Getting_SIP_Messages_to_display when you get the trace data, take a look at it using sipviewer and/or post the trace with a description of your configuration (identify components by IP address), what you were doing, and which call in the trace you're talking about (by call-id or frame number in the trace, preferably). Dropping that quickly usually means there's something wrong with the phones. > I also know a guy who runs an SCS and he said he just "assigns the > user to the xlite". But he confrimed that xlite does not show up in > the drop downs. I haven't heard back from him yet when I asked him > how the heck he assigns the user to the Xlite if the Xlite is not in > the drop downs. You don't need to assign the user to an xlite - you just need to get the user name, password, and realm from sipXecs into the xlite configuration and all should work. _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users
