Ranga,
I have confirmed that Xlite works fine with both incoming & outgoing
calls. Here are my ITSP settings from sipXBridge-1:
SIP
Public port Set this if your ITSP requires a specific port.
External port (Default: 5080) The ITSP facing port. The ITSP will
send signaling here.
Music on hold (Default: unchecked) If checked sipXbridge Music On
Hold support is enabled. Phones should disable their MOH support if
sipXbridge support for MOH is enabled.
Incoming calls destination (Default: operator) Determines where to
send inbound calls. If empty, inbound calls are directly routed to the
specified number in the inbound request and have to be redirected by
aliases or dial plan rules. This setting applies to all ITSPs since it
is not reliably possible to detect from which ITSP a call arrives if
several ITSPs are configured. For incoming calls the ITSP domain is
mapped to the own domain (i.e. if a call arrives with sip:[email protected]
, then sipXbridge will map it to sip:[email protected]. An alias or
user ID 1234 needs to exist or an alternative value can be specified
in this field.)
and my settings from the LES.net gateway:
ITSP Account
The information that is specific to a given ITSP account. ITSP server
domain name (Default: did.voip.les.net) The domain name of the ITSP.
This domain name is used to look up via DNS SRV the address of the SIP
server the ITSP uses. If the ITSP does not provide this lookup
mechanism specify a server address below.
User name The authentication user name attached to the account.
Password The password for the account.
ITSP server address If the ITSP specifies a server address or name
or an outbound proxy, enter it here. If nothing is specified, the
route to the ITSP's server (outbound proxy) is determined by DNS
lookup on the ITSP domain.
Use public address for call setup (Default: unchecked) If checked,
use the sipXbridge public address for SIP signaling and media (SDP).
Otherwise, the local (LAN) address will be used. Using the local
address assumes that the ITSP provides NAT traversal functionality.
Strip private headers (Default: unchecked) When sipxbridge sees
"strip-private-headers", it will strip sensitive headers such as
Subject, Call-Info, Organization, User-Agent, Reply-To and In-Reply-
To. Display Name will be stripped where ever it appears.
Use default asserted identity (Default: checked) If checked
(default), use the default asserted identity. Otherwise, you must
enter a usern...@domain to override the default.
Asserted identity Override the default asserted identity.
Register on initialization (Default: checked) Defines whether or not
to register with the given ITSP on initialization.
ITSP Registrar Address If the ITSP specifies a registrar different
from the ITSP server address above, enter it here. Otherwise this
setting is assumed to be identical to the ITSP server address proxy.
ITSP Registrar Listening Port The port where REGISTER requests are
sent. Defaults to ITSP Server Port if nothing specified.
Registration interval (Default: 600) Registration interval (seconds)
Method to use for SIP keepalive. (Default: Empty SIP message)
Defines the mechanism to use for SIP keepalive. If nothing is
specified, CR-LF (empty SIP message) is used.
Method to use for RTP keepalive. (Default: None)
Any suggestions as to what to try to change?
James
_______________________________________________
sipx-users mailing list [email protected]
List Archive: http://list.sipfoundry.org/archive/sipx-users
Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users
sipXecs IP PBX -- http://www.sipfoundry.org/
