>>"Dialling 201 from the handset just gives a budy tone and "Call Ended". A >>call from the softphone to "sip:2...@domain" works fine"
I have now managed to install the sipviewer software and run the trace. I ran comparative traces of calls from the softphone (that succeed) and calls from the hardware SPA942 handsets (that fail). The difference is that the sip addresses for to and from addresses used when the softphone dials are "sip:[email protected]" (whick works). However when the phone handsets dial each other I dial "200" on the display and the trace shows this is converted to "sip:[email protected]" (where sipx.dev.domain.com is the name of the sipx server). Is abyone able to point me to where in the sipx config this value would need changing please? I cannot see it explicitly set anywhere in the current config. I think this issue is very close to being sorted... Thanks Dan
_______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/
