Use binary mode (bin) in FTP when you transfer the file. Paul
> I captured packets using this command on the sipX system: tcpdump -n > -s 0 -i eth1 -w sipx-tcpdump1.cap not port 22 > Then I changed the command to: tcpdump -n -s 65535 -i eth1 -w sipx- > tcpdump2.cap not port 22 > > When I try to open the files with wireshark, I get this error > > The capture file appears to be damaged or corrupt. > (pcap: File has 100705613-byte packet, bigger than maximum of 65535) > > What do I need to do > > -----Original Message----- > From: [email protected] [mailto:sipx-users- > [email protected]] On Behalf Of Ken Ridley > Sent: Tuesday, January 10, 2012 1:05 PM > To: 'Discussion list for users of sipXecs software' > Subject: Re: [sipx-users] no DTMF > > ITSP is Broadvox > The system has been connected to them with no problems, for about > two months I captured packets behind the router to the sipx, and the > DTMF is making it all the way to the system > > No. Time Source Destination Protocol Info > 3684 147.811596 208.93.224.230 192.168.111.210 RTP > EVENT Payload type=RTP Event, DTMF Four 4 > 4230 149.611648 208.93.224.230 192.168.111.210 RTP > EVENT Payload type=RTP Event, DTMF Two 2 > 4631 151.491430 208.93.224.230 192.168.111.210 RTP > EVENT Payload type=RTP Event, DTMF Five 5 > 4787 153.031845 208.93.224.230 192.168.111.210 RTP > EVENT Payload type=RTP Event, DTMF One 1 > 4968 154.771810 208.93.224.230 192.168.111.210 RTP > EVENT Payload type=RTP Event, DTMF Eight 8 > 5105 156.151521 208.93.224.230 192.168.111.210 RTP > EVENT Payload type=RTP Event, DTMF Five 5 > 5235 157.411472 208.93.224.230 192.168.111.210 RTP > EVENT Payload type=RTP Event, DTMF Two 2 > > Another thing that happened this morning was, all of the phone > registrations were expired, the ITSP connection was active I still > had web access, there were just no phones connected I rebooted the > system, and the phones reconnected I do not know if we were having > the DTMF problem before I rebooted > > > -----Original Message----- > From: [email protected] [mailto:sipx-users- > [email protected]] On Behalf Of Tony Graziano > Sent: Tuesday, January 10, 2012 12:21 PM > To: Discussion list for users of sipXecs software > Subject: Re: [sipx-users] no DTMF > > can you tell what kind of UA or switch the ITSP is using> > > (i.e. Freeswitch and Sonus hate each other when it comes to DTMF). > > Who is the ITSP? > > On Tue, Jan 10, 2012 at 3:19 PM, Michael Picher <[email protected]> wrote: > > well, you already tried restarting it... > > > > i'd do a capture on the box itself with tcpdump and then inspect the > > .pcap file and see if you can see/hear the dtmf. > > > > mike > > > > > > On Tue, Jan 10, 2012 at 3:06 PM, Ken Ridley <[email protected]> wrote: > >> > >> When you say gateway, do you mean the media gateway (sipxbridge), or > >> the network gateway (router)? > >> > >> The provider says they are sending DTMF > >> > >> I rebooted the router > >> > >> If the sipxbridge is the problem, how do I fix it? > >> > >> > >> > >> From: [email protected] > >> [mailto:[email protected]] On Behalf Of Michael > >> Picher > >> Sent: Tuesday, January 10, 2012 11:32 AM > >> > >> > >> To: Discussion list for users of sipXecs software > >> Subject: Re: [sipx-users] no DTMF > >> > >> > >> > >> so it's not the server, it's either the gateway or the provider. > >> > >> On Tue, Jan 10, 2012 at 2:27 PM, Ken Ridley <[email protected]> wrote: > >> > >> Yes it works > >> > >> > >> > >> I just got off the phone with the ITSP, and they say that they see > >> the DTMF being sent > >> > >> If I call user's DID, and send DTMF, all they hear is a click > >> > >> > >> > >> From: [email protected] > >> [mailto:[email protected]] On Behalf Of Michael > >> Picher > >> Sent: Tuesday, January 10, 2012 11:19 AM > >> To: Discussion list for users of sipXecs software > >> Subject: Re: [sipx-users] no DTMF > >> > >> > >> > >> does it work from inside if you dial the AA extension? > >> > >> On Tue, Jan 10, 2012 at 2:14 PM, Ken Ridley <[email protected]> wrote: > >> > >> This morning none of the options on the AA work > >> > >> The problem is external incoming calls are not sending DTMF > >> > >> If I dial the AA internally the DTMF is heard > >> > >> Is this a provider, or a sipx problem? > >> > >> > >> > >> I rebooted the system, but that did not fix the problem > >> > >> We are using an ITSP with the sipxbridge > >> > >> > >> > >> > >> > >> Thank you for your help, > >> > >> Ken Ridley > >> > >> > >> _______________________________________________ > >> sipx-users mailing list > >> [email protected] > >> List Archive: http://list.sipfoundry.org/archive/sipx-users/ > >> > >> > >> > >> > >> > >> -- > >> Michael Picher, Director of Technical Services eZuce, Inc. > >> > >> 300 Brickstone Square > >> > >> Suite 201 > >> > >> Andover, MA. 01810 > >> > >> O.978-296-1005 X2015 > >> M.207-956-0262 > >> @mpicher <http://twitter.com/mpicher> www.ezuce.com > >> > >> > >> > >> > >> --------------------------------------------------------------------- > >> --------------------------------------- > >> > >> Hope to see you at the sipX CoLab! > >> http://www.sipfoundry.org/sipx-colab > >> > >> A gathering for - open source users, eZuce customers & eZuce partners > >> > >> Get the inside track on 4.6 and a glimpse at the future of sipXecs! > >> > >> > >> > >> > >> _______________________________________________ > >> sipx-users mailing list > >> [email protected] > >> List Archive: http://list.sipfoundry.org/archive/sipx-users/ > >> > >> > >> > >> > >> > >> -- > >> Michael Picher, Director of Technical Services eZuce, Inc. > >> > >> 300 Brickstone Square > >> > >> Suite 201 > >> > >> Andover, MA. 01810 > >> > >> O.978-296-1005 X2015 > >> M.207-956-0262 > >> @mpicher <http://twitter.com/mpicher> www.ezuce.com > >> > >> > >> > >> > >> > ------------------------------------------------------------------------------------------------------------ > >> > >> Hope to see you at the sipX CoLab! http://www.sipfoundry.org/sipx-colab > >> > >> A gathering for - open source users, eZuce customers & eZuce partners > >> > >> Get the inside track on 4.6 and a glimpse at the future of sipXecs! > >> > >> > >> > >> > >> _______________________________________________ > >> sipx-users mailing list > >> [email protected] > >> List Archive: http://list.sipfoundry.org/archive/sipx-users/ > > > > > > > > > > -- > > Michael Picher, Director of Technical Services > > eZuce, Inc. > > > > 300 Brickstone Square > > > > Suite 201 > > > > Andover, MA. 01810 > > > > O.978-296-1005 X2015 > > M.207-956-0262 > > @mpicher <http://twitter.com/mpicher> > > www.ezuce.com > > > > > ------------------------------------------------------------------------------------------------------------ > > Hope to see you at the sipX CoLab! http://www.sipfoundry.org/sipx-colab > > A gathering for - open source users, eZuce customers & eZuce partners > > Get the inside track on 4.6 and a glimpse at the future of sipXecs! > > > > > > _______________________________________________ > > sipx-users mailing list > > [email protected] > > List Archive: http://list.sipfoundry.org/archive/sipx-users/ > > > > -- > ====================== > Tony Graziano, Manager > Telephone: 434.984.8430 > sip: [email protected] > Fax: 434.465.6833 > > Email: [email protected] > > LAN/Telephony/Security and Control Systems Helpdesk: > Telephone: 434.984.8426 > sip: [email protected] > > Helpdesk Customers: http://myhelp.myitdepartment.net > Blog: http://blog.myitdepartment.net > > Linked-In Profile: > http://www.linkedin.com/pub/tony-graziano/14/4a6/7a4 > Ask about our Internet Fax services! > _______________________________________________ > sipx-users mailing list > [email protected] > List Archive: http://list.sipfoundry.org/archive/sipx-users/ > > > _______________________________________________ > sipx-users mailing list > [email protected] > List Archive: http://list.sipfoundry.org/archive/sipx-users/ > > > _______________________________________________ > sipx-users mailing list > [email protected] > List Archive: http://list.sipfoundry.org/archive/sipx-users/
_______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users/
