APs problems Hi ,, I have this problem with my Aps
The costumers simply disconnect from the AP, lets say I have 11 clients connected on one AP. When I look on assosiated window there are only 7 on the AP, but only when I reset the AP then I get 11 clients back. This problem is randomly on the system and I cant say that I can trust Smart Bridge products because of many software problems, looking into new AP solutions, not Smart Bridges.. :( Have tryed new firmware no result for this problem,,, > Well I had have all the latest firmware on my units. I think if anything > needs to be stress tested it is here in town I think at last count we had > at LEAST 6 WISPS doing battle trying to get a piece of the pie and I am > NOT going to let the beat me.. I may have to go to 5.7 gear pretty quick > unless I can get this isolated and resolved. I spend ore and more of my > day taking calls from clients trouble shooting and resting units etc. > Thats all part of our commitment to them especially like today I don't > have to answer my cell phone but I do I care about my clients like I would > have liked my 1st WISP would have done for me but then again thats why I > now have more customers then them and they are really pissed.. > > I will say it again customer service is CRUCIAL to keeping a wisp going no > matter how tiring it is to you.. > > > > > ----- Original Message ----- > From: Rudolph Worrell > To: [EMAIL PROTECTED] > Sent: Sunday, October 19, 2003 3:30 PM > Subject: RE: [smartBridges] Beta 1.0.08 locking up Ethernet anyone > else?? > > > Looks like you guys are experiencing what I had a few weeks back when I > lost my whole network and had to reset my APPO every time. > > I was not using the new firmware though. I also was using an APPT in CB > mode to feed the APPO. I fixed it by using a separate APPO to link back > to the APPT. I upgraded the firmware to the same version an it seems to > be fine now. > > I also was doing changes when my APPO stopped associating with clients. > Good Luck! > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] Behalf Of Blazen Wireless > Sent: Sunday, October 19, 2003 5:16 PM > To: [EMAIL PROTECTED] > Subject: Re: [smartBridges] Beta 1.0.08 locking up ethernet anyone > else?? > > > Something else too now it appears not sure due to the firmware that > some of the units are losing association to the APPO or the APPO is > dropping clients I have 28 on this APPO and I have to reset it for 5 > of the clients to reassociate? Its seems to be a little hotter today > again it was cooling off. I would say its about 100% according to > local weather forecasts.. Its been showing this symptom now for the > past couple of days as it has been hotter.. > > I wish this was just all a bad dream... > > ----- Original Message ----- > From: Bobby Bounds > To: [EMAIL PROTECTED] > Sent: Sunday, October 19, 2003 2:38 PM > Subject: Re: [smartBridges] Beta 1.0.08 locking up ethernet anyone > else?? > > > YES, we have seen this behavior recently........the firmware is > buggy and SB does not seem to know the meaning of regression > testing, so they fix one thing only to have it break something else. > We have wasted numerous hours in the last few weeks on installs > where signal strength is great but IP traffic won't pass. We finally > get it to work thru what seems to be magic. > > We have also seen problems on API, APPO and APPI's using the new > firmware where the RSSI at the CPE is 90% but the unit won't > associate. I've never seen this before. > > It sucks to be me. > > Bobby Bounds > Airwave Internet, LLC > > > > ----- Original Message ----- > From: Blazen Wireless > To: [EMAIL PROTECTED] > Sent: Sunday, October 19, 2003 11:17 AM > Subject: [smartBridges] Beta 1.0.08 locking up ethernet anyone > else?? > > > Has anyone else seen this on any of the ABO or ABI units? > I have had a few now that have NO more problems with reassociation > to the tower yet about 2 -3 times a week the Ethernet TRANSMIT > side shuts down as far as the statistics show when you log into > the radio. It reports 1 and if you look at the receive side it is > in the hundreds of thousands of bytes.. > > If you simply software reboot the radio it comes back alive and > traffic starts to pass and both sides increment transmit and > receive for a few days then it locks up again. It almost seems > like when it auto reboots it does not bring up the Ethernet all > the way. I have downgraded to 1.0.07 to confirm that it is in the > firmware. This customer has about 85% rssi and 90% link quality so > I don't see how it would be interference. > > > > > > Martin & Steve > Blazen Wireless > 909-326-5003 > www.blazenwireless.com S�mundur Johannsson Technician eMax Wireless Internet Hlidasmari 8 201 Kopavogur Iceland Tel :(354) 5444454 FAX :(354) 5444453 www.emax.is ----------ANNOUNCEMENT---------- Don't forget to register for WISPCON IV http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
