All my clietns are exaclty the same firmware etc. In my personal opinion is that the SB stuff just cant handle the amoutn of clients and traffic I am passing plain and simple. I need to find something that is going to handle the capacity and it is most likely going to be in another manufacturer and or freq.. I dont have time trouble shoot on a daily basis. I have become a real bitch lately and my family and friends and workes have all noticed it. This happens when things just dont go right.
Quoting Kevin Proctor <[EMAIL PROTECTED]>: > Are you SURE those clients have the latest firmware in them? As in, I > have physically checked each one? > > What is different about those clients from the ones that work just fine? > There has to be something different and it is probably in your > configuration. > > You can use SimpleDeploy to dump the settings so you can look at them > side by side. You can also use it to ensure that each and every radio > has the exact same settings before it is ever given to the installer. > > Kevin B. Proctor > Customer Service > Internet and International Orders > Electro Comm Distributing Inc > 5015 Paris St > Denver CO 90239 > USA > > Phone: +1-303-371-8182 > 800-525-0173 > FAX: +1-303-371-8158 > 800-423-8018 > [EMAIL PROTECTED] > > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Blazen Wireless > Sent: Sunday, October 19, 2003 7:41 PM > To: [EMAIL PROTECTED] > Subject: Re: [smartBridges] Beta 1.0.08 locking up Ethernet anyone > else?? > > Just realized I didn't have the latest firmware on the APPO's I think > for > god reason I just loaded it on one APPO to test it and it seems the > clients > reasociate but VERY VERY VERY slow one every 10 seconds seems like? > I had 27 now I am down to 18 associated clients and it is hung there?? I > downgrade back to 1.0.08 and they reasociate in a second or two and I > mean > ALL my clients?? > > Whats causing such a delayed response?? > > > ----- Original Message ----- > From: "S�mundur Johannsson" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Sunday, October 19, 2003 4:37 PM > Subject: Re: [smartBridges] Beta 1.0.08 locking up Ethernet anyone > else?? > > > > > > > APs problems > > > > Hi ,, I have this problem with my Aps > > > > The costumers simply disconnect from the AP, lets say I have 11 > clients > > connected on one AP. When I look on assosiated window there are only 7 > on > > the AP, but only when I reset the AP then I get 11 clients back. This > > problem is randomly on the system and I cant say that I can trust > Smart > > Bridge products because of many software problems, looking into new AP > > solutions, not Smart Bridges.. :( > > > > > > > > Have tryed new firmware no result for this problem,,,,, > > > S�mundur Johannsson / eMax Iceland > > > > > > > > > > > > > >> Well I had have all the latest firmware on my units. I think if > anything > >> needs to be stress tested it is here in town I think at last count we > >> had > >> at LEAST 6 WISPS doing battle trying to get a piece of the pie and I > am > >> NOT going to let the beat me.. I may have to go to 5.7 gear pretty > quick > >> unless I can get this isolated and resolved. I spend ore and more of > my > >> day taking calls from clients trouble shooting and resting units etc. > >> Thats all part of our commitment to them especially like today I > don't > >> have to answer my cell phone but I do I care about my clients like I > >> would > >> have liked my 1st WISP would have done for me but then again thats > why I > >> now have more customers then them and they are really pissed.. > >> > >> I will say it again customer service is CRUCIAL to keeping a wisp > going > >> no > >> matter how tiring it is to you.. > >> > >> > >> > >> > >> ----- Original Message ----- > >> From: Rudolph Worrell > >> To: [EMAIL PROTECTED] > >> Sent: Sunday, October 19, 2003 3:30 PM > >> Subject: RE: [smartBridges] Beta 1.0.08 locking up Ethernet anyone > >> else?? > >> > >> > >> Looks like you guys are experiencing what I had a few weeks back > when > >> I > >> lost my whole network and had to reset my APPO every time. > >> > >> I was not using the new firmware though. I also was using an APPT > in > >> CB > >> mode to feed the APPO. I fixed it by using a separate APPO to link > back > >> to the APPT. I upgraded the firmware to the same version an it seems > to > >> be fine now. > >> > >> I also was doing changes when my APPO stopped associating with > >> clients. > >> Good Luck! > >> -----Original Message----- > >> From: [EMAIL PROTECTED] > >> [mailto:[EMAIL PROTECTED] Behalf Of Blazen Wireless > >> Sent: Sunday, October 19, 2003 5:16 PM > >> To: [EMAIL PROTECTED] > >> Subject: Re: [smartBridges] Beta 1.0.08 locking up ethernet > anyone > >> else?? > >> > >> > >> Something else too now it appears not sure due to the firmware > that > >> some of the units are losing association to the APPO or the APPO is > >> dropping clients I have 28 on this APPO and I have to reset it for 5 > >> of the clients to reassociate? Its seems to be a little hotter today > >> again it was cooling off. I would say its about 100% according to > >> local weather forecasts.. Its been showing this symptom now for the > >> past couple of days as it has been hotter.. > >> > >> I wish this was just all a bad dream... > >> > >> ----- Original Message ----- > >> From: Bobby Bounds > >> To: [EMAIL PROTECTED] > >> Sent: Sunday, October 19, 2003 2:38 PM > >> Subject: Re: [smartBridges] Beta 1.0.08 locking up ethernet > anyone > >> else?? > >> > >> > >> YES, we have seen this behavior recently........the firmware is > >> buggy and SB does not seem to know the meaning of regression > >> testing, so they fix one thing only to have it break something else. > >> We have wasted numerous hours in the last few weeks on installs > >> where signal strength is great but IP traffic won't pass. We finally > >> get it to work thru what seems to be magic. > >> > >> We have also seen problems on API, APPO and APPI's using the > new > >> firmware where the RSSI at the CPE is 90% but the unit won't > >> associate. I've never seen this before. > >> > >> It sucks to be me. > >> > >> Bobby Bounds > >> Airwave Internet, LLC > >> > >> > >> > >> ----- Original Message ----- > >> From: Blazen Wireless > >> To: [EMAIL PROTECTED] > >> Sent: Sunday, October 19, 2003 11:17 AM > >> Subject: [smartBridges] Beta 1.0.08 locking up ethernet > anyone > >> else?? > >> > >> > >> Has anyone else seen this on any of the ABO or ABI units? > >> I have had a few now that have NO more problems with > >> reassociation > >> to the tower yet about 2 -3 times a week the Ethernet TRANSMIT > >> side shuts down as far as the statistics show when you log into > >> the radio. It reports 1 and if you look at the receive side it is > >> in the hundreds of thousands of bytes.. > >> > >> If you simply software reboot the radio it comes back alive > and > >> traffic starts to pass and both sides increment transmit and > >> receive for a few days then it locks up again. It almost seems > >> like when it auto reboots it does not bring up the Ethernet all > >> the way. I have downgraded to 1.0.07 to confirm that it is in the > >> firmware. This customer has about 85% rssi and 90% link quality so > >> I don't see how it would be interference. > >> > >> > >> > >> > >> > >> Martin & Steve > >> Blazen Wireless > >> 909-326-5003 > >> www.blazenwireless.com > > > > > > S�mundur Johannsson Technician > > eMax Wireless Internet > > Hlidasmari 8 > > 201 Kopavogur Iceland > > Tel :(354) 5444454 > > FAX :(354) 5444453 > > www.emax.is > > > > ----------ANNOUNCEMENT---------- > > Don't forget to register for WISPCON IV > > http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm > > > > The PART-15.ORG smartBridges Discussion List > > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > > smartBridges <yournickname> > > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe > > smartBridges) > > Archives: http://archives.part-15.org > > > > > S�mundur Johannsson Technician > eMax Wireless Internet > Hlidasmari 8 > 201 Kopavogur Iceland > Tel :(354) 5444454 > FAX :(354) 5444453 > www.emax.is > > ----------ANNOUNCEMENT---------- > Don't forget to register for WISPCON IV > http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > smartBridges <yournickname> > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe > smartBridges) > Archives: http://archives.part-15.org > > > ----------ANNOUNCEMENT---------- > Don't forget to register for WISPCON IV > http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > smartBridges <yournickname> > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe > smartBridges) > Archives: http://archives.part-15.org > > ----------ANNOUNCEMENT---------- > Don't forget to register for WISPCON IV > http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges > <yournickname> > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe > smartBridges) > Archives: http://archives.part-15.org > Martin Moreno Blazen Wireless 909-326-5003 www.blazenwireless.com ----------ANNOUNCEMENT---------- Don't forget to register for WISPCON IV http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
