Are you SURE those clients have the latest firmware in them? As in, I
have physically checked each one?
What is different about those clients from the ones that work just fine?
There has to be something different and it is probably in your
configuration.
You can use SimpleDeploy to dump the settings so you can look at them
side by side. You can also use it to ensure that each and every radio
has the exact same settings before it is ever given to the installer.
Kevin B. Proctor
Customer Service
Internet and International Orders
Electro Comm Distributing Inc
5015 Paris St
Denver CO 90239
USA
Phone: +1-303-371-8182
800-525-0173
FAX: +1-303-371-8158
800-423-8018
[EMAIL PROTECTED]
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Blazen Wireless
Sent: Sunday, October 19, 2003 7:41 PM
To: [EMAIL PROTECTED]
Subject: Re: [smartBridges] Beta 1.0.08 locking up Ethernet anyone
else??
Just realized I didn't have the latest firmware on the APPO's I think
for
god reason I just loaded it on one APPO to test it and it seems the
clients
reasociate but VERY VERY VERY slow one every 10 seconds seems like?
I had 27 now I am down to 18 associated clients and it is hung there?? I
downgrade back to 1.0.08 and they reasociate in a second or two and I
mean
ALL my clients??
Whats causing such a delayed response??
----- Original Message -----
From: "S�mundur Johannsson" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Sunday, October 19, 2003 4:37 PM
Subject: Re: [smartBridges] Beta 1.0.08 locking up Ethernet anyone
else??
>
> APs problems
>
> Hi ,, I have this problem with my Aps
>
> The costumers simply disconnect from the AP, lets say I have 11
clients
> connected on one AP. When I look on assosiated window there are only 7
on
> the AP, but only when I reset the AP then I get 11 clients back. This
> problem is randomly on the system and I cant say that I can trust
Smart
> Bridge products because of many software problems, looking into new AP
> solutions, not Smart Bridges.. :(
>
>
>
> Have tryed new firmware no result for this problem,,,,,
S�mundur Johannsson / eMax Iceland
>
>
>
>
>
>
>> Well I had have all the latest firmware on my units. I think if
anything
>> needs to be stress tested it is here in town I think at last count we
>> had
>> at LEAST 6 WISPS doing battle trying to get a piece of the pie and I
am
>> NOT going to let the beat me.. I may have to go to 5.7 gear pretty
quick
>> unless I can get this isolated and resolved. I spend ore and more of
my
>> day taking calls from clients trouble shooting and resting units etc.
>> Thats all part of our commitment to them especially like today I
don't
>> have to answer my cell phone but I do I care about my clients like I
>> would
>> have liked my 1st WISP would have done for me but then again thats
why I
>> now have more customers then them and they are really pissed..
>>
>> I will say it again customer service is CRUCIAL to keeping a wisp
going
>> no
>> matter how tiring it is to you..
>>
>>
>>
>>
>> ----- Original Message -----
>> From: Rudolph Worrell
>> To: [EMAIL PROTECTED]
>> Sent: Sunday, October 19, 2003 3:30 PM
>> Subject: RE: [smartBridges] Beta 1.0.08 locking up Ethernet anyone
>> else??
>>
>>
>> Looks like you guys are experiencing what I had a few weeks back
when
>> I
>> lost my whole network and had to reset my APPO every time.
>>
>> I was not using the new firmware though. I also was using an APPT
in
>> CB
>> mode to feed the APPO. I fixed it by using a separate APPO to link
back
>> to the APPT. I upgraded the firmware to the same version an it seems
to
>> be fine now.
>>
>> I also was doing changes when my APPO stopped associating with
>> clients.
>> Good Luck!
>> -----Original Message-----
>> From: [EMAIL PROTECTED]
>> [mailto:[EMAIL PROTECTED] Behalf Of Blazen Wireless
>> Sent: Sunday, October 19, 2003 5:16 PM
>> To: [EMAIL PROTECTED]
>> Subject: Re: [smartBridges] Beta 1.0.08 locking up ethernet
anyone
>> else??
>>
>>
>> Something else too now it appears not sure due to the firmware
that
>> some of the units are losing association to the APPO or the APPO is
>> dropping clients I have 28 on this APPO and I have to reset it for 5
>> of the clients to reassociate? Its seems to be a little hotter today
>> again it was cooling off. I would say its about 100% according to
>> local weather forecasts.. Its been showing this symptom now for the
>> past couple of days as it has been hotter..
>>
>> I wish this was just all a bad dream...
>>
>> ----- Original Message -----
>> From: Bobby Bounds
>> To: [EMAIL PROTECTED]
>> Sent: Sunday, October 19, 2003 2:38 PM
>> Subject: Re: [smartBridges] Beta 1.0.08 locking up ethernet
anyone
>> else??
>>
>>
>> YES, we have seen this behavior recently........the firmware is
>> buggy and SB does not seem to know the meaning of regression
>> testing, so they fix one thing only to have it break something else.
>> We have wasted numerous hours in the last few weeks on installs
>> where signal strength is great but IP traffic won't pass. We finally
>> get it to work thru what seems to be magic.
>>
>> We have also seen problems on API, APPO and APPI's using the
new
>> firmware where the RSSI at the CPE is 90% but the unit won't
>> associate. I've never seen this before.
>>
>> It sucks to be me.
>>
>> Bobby Bounds
>> Airwave Internet, LLC
>>
>>
>>
>> ----- Original Message -----
>> From: Blazen Wireless
>> To: [EMAIL PROTECTED]
>> Sent: Sunday, October 19, 2003 11:17 AM
>> Subject: [smartBridges] Beta 1.0.08 locking up ethernet
anyone
>> else??
>>
>>
>> Has anyone else seen this on any of the ABO or ABI units?
>> I have had a few now that have NO more problems with
>> reassociation
>> to the tower yet about 2 -3 times a week the Ethernet TRANSMIT
>> side shuts down as far as the statistics show when you log into
>> the radio. It reports 1 and if you look at the receive side it is
>> in the hundreds of thousands of bytes..
>>
>> If you simply software reboot the radio it comes back alive
and
>> traffic starts to pass and both sides increment transmit and
>> receive for a few days then it locks up again. It almost seems
>> like when it auto reboots it does not bring up the Ethernet all
>> the way. I have downgraded to 1.0.07 to confirm that it is in the
>> firmware. This customer has about 85% rssi and 90% link quality so
>> I don't see how it would be interference.
>>
>>
>>
>>
>>
>> Martin & Steve
>> Blazen Wireless
>> 909-326-5003
>> www.blazenwireless.com
>
>
> S�mundur Johannsson Technician
> eMax Wireless Internet
> Hlidasmari 8
> 201 Kopavogur Iceland
> Tel :(354) 5444454
> FAX :(354) 5444453
> www.emax.is
>
> ----------ANNOUNCEMENT----------
> Don't forget to register for WISPCON IV
> http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm
>
> The PART-15.ORG smartBridges Discussion List
> To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
> smartBridges <yournickname>
> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe
> smartBridges)
> Archives: http://archives.part-15.org
>
S�mundur Johannsson Technician
eMax Wireless Internet
Hlidasmari 8
201 Kopavogur Iceland
Tel :(354) 5444454
FAX :(354) 5444453
www.emax.is
----------ANNOUNCEMENT----------
Don't forget to register for WISPCON IV
http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm
The PART-15.ORG smartBridges Discussion List
To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
smartBridges <yournickname>
To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe
smartBridges)
Archives: http://archives.part-15.org
----------ANNOUNCEMENT----------
Don't forget to register for WISPCON IV
http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm
The PART-15.ORG smartBridges Discussion List
To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
smartBridges <yournickname>
To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe
smartBridges)
Archives: http://archives.part-15.org
----------ANNOUNCEMENT----------
Don't forget to register for WISPCON IV
http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm
The PART-15.ORG smartBridges Discussion List
To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges
<yournickname>
To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges)
Archives: http://archives.part-15.org
