Well I dont know what the deal is with mine??? they just crap out like I said with a couple users downloading... Pigns are igh thruput is low..
Quoting The Wirefree Network <[EMAIL PROTECTED]>: > Huh???? > > I am sure that there are folks out there with more than this...but I have > 60+ clients funneling through a single aPPo. > > My backend is a single T-1 and everyone is unthrottled. > > I pull about 40 Gig per month through the aPPo. > > I plan on putting another 30 or so on this aPPo. > > Sully > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] > On Behalf Of Martin Moreno > Sent: Sunday, October 19, 2003 8:29 PM > To: [EMAIL PROTECTED] > Subject: RE: [smartBridges] Beta 1.0.08 locking up Ethernet anyone else?? > > All my clietns are exaclty the same firmware etc. > > In my personal opinion is that the SB stuff just cant handle the amoutn of > clients and traffic I am passing plain and simple. I need to find something > > that is going to handle the capacity and it is most likely going to be in > another manufacturer and or freq.. I dont have time trouble shoot on a > daily > > basis. I have become a real bitch lately and my family and friends and > workes > have all noticed it. This happens when things just dont go right. > > > > > > Quoting Kevin Proctor <[EMAIL PROTECTED]>: > > > Are you SURE those clients have the latest firmware in them? As in, I > > have physically checked each one? > > > > What is different about those clients from the ones that work just fine? > > There has to be something different and it is probably in your > > configuration. > > > > You can use SimpleDeploy to dump the settings so you can look at them > > side by side. You can also use it to ensure that each and every radio > > has the exact same settings before it is ever given to the installer. > > > > Kevin B. Proctor > > Customer Service > > Internet and International Orders > > Electro Comm Distributing Inc > > 5015 Paris St > > Denver CO 90239 > > USA > > > > Phone: +1-303-371-8182 > > 800-525-0173 > > FAX: +1-303-371-8158 > > 800-423-8018 > > [EMAIL PROTECTED] > > > > > > -----Original Message----- > > From: [EMAIL PROTECTED] > > [mailto:[EMAIL PROTECTED] On Behalf Of Blazen Wireless > > Sent: Sunday, October 19, 2003 7:41 PM > > To: [EMAIL PROTECTED] > > Subject: Re: [smartBridges] Beta 1.0.08 locking up Ethernet anyone > > else?? > > > > Just realized I didn't have the latest firmware on the APPO's I think > > for > > god reason I just loaded it on one APPO to test it and it seems the > > clients > > reasociate but VERY VERY VERY slow one every 10 seconds seems like? > > I had 27 now I am down to 18 associated clients and it is hung there?? I > > downgrade back to 1.0.08 and they reasociate in a second or two and I > > mean > > ALL my clients?? > > > > Whats causing such a delayed response?? > > > > > > ----- Original Message ----- > > From: "S�mundur Johannsson" <[EMAIL PROTECTED]> > > To: <[EMAIL PROTECTED]> > > Sent: Sunday, October 19, 2003 4:37 PM > > Subject: Re: [smartBridges] Beta 1.0.08 locking up Ethernet anyone > > else?? > > > > > > > > > > > > APs problems > > > > > > Hi ,, I have this problem with my Aps > > > > > > The costumers simply disconnect from the AP, lets say I have 11 > > clients > > > connected on one AP. When I look on assosiated window there are only 7 > > on > > > the AP, but only when I reset the AP then I get 11 clients back. This > > > problem is randomly on the system and I cant say that I can trust > > Smart > > > Bridge products because of many software problems, looking into new AP > > > solutions, not Smart Bridges.. :( > > > > > > > > > > > > Have tryed new firmware no result for this problem,,,,, > > > > > > S�mundur Johannsson / eMax Iceland > > > > > > > > > > > > > > > > > > > > >> Well I had have all the latest firmware on my units. I think if > > anything > > >> needs to be stress tested it is here in town I think at last count we > > >> had > > >> at LEAST 6 WISPS doing battle trying to get a piece of the pie and I > > am > > >> NOT going to let the beat me.. I may have to go to 5.7 gear pretty > > quick > > >> unless I can get this isolated and resolved. I spend ore and more of > > my > > >> day taking calls from clients trouble shooting and resting units etc. > > >> Thats all part of our commitment to them especially like today I > > don't > > >> have to answer my cell phone but I do I care about my clients like I > > >> would > > >> have liked my 1st WISP would have done for me but then again thats > > why I > > >> now have more customers then them and they are really pissed.. > > >> > > >> I will say it again customer service is CRUCIAL to keeping a wisp > > going > > >> no > > >> matter how tiring it is to you.. > > >> > > >> > > >> > > >> > > >> ----- Original Message ----- > > >> From: Rudolph Worrell > > >> To: [EMAIL PROTECTED] > > >> Sent: Sunday, October 19, 2003 3:30 PM > > >> Subject: RE: [smartBridges] Beta 1.0.08 locking up Ethernet anyone > > >> else?? > > >> > > >> > > >> Looks like you guys are experiencing what I had a few weeks back > > when > > >> I > > >> lost my whole network and had to reset my APPO every time. > > >> > > >> I was not using the new firmware though. I also was using an APPT > > in > > >> CB > > >> mode to feed the APPO. I fixed it by using a separate APPO to link > > back > > >> to the APPT. I upgraded the firmware to the same version an it seems > > to > > >> be fine now. > > >> > > >> I also was doing changes when my APPO stopped associating with > > >> clients. > > >> Good Luck! > > >> -----Original Message----- > > >> From: [EMAIL PROTECTED] > > >> [mailto:[EMAIL PROTECTED] Behalf Of Blazen Wireless > > >> Sent: Sunday, October 19, 2003 5:16 PM > > >> To: [EMAIL PROTECTED] > > >> Subject: Re: [smartBridges] Beta 1.0.08 locking up ethernet > > anyone > > >> else?? > > >> > > >> > > >> Something else too now it appears not sure due to the firmware > > that > > >> some of the units are losing association to the APPO or the APPO is > > >> dropping clients I have 28 on this APPO and I have to reset it for 5 > > >> of the clients to reassociate? Its seems to be a little hotter today > > >> again it was cooling off. I would say its about 100% according to > > >> local weather forecasts.. Its been showing this symptom now for the > > >> past couple of days as it has been hotter.. > > >> > > >> I wish this was just all a bad dream... > > >> > > >> ----- Original Message ----- > > >> From: Bobby Bounds > > >> To: [EMAIL PROTECTED] > > >> Sent: Sunday, October 19, 2003 2:38 PM > > >> Subject: Re: [smartBridges] Beta 1.0.08 locking up ethernet > > anyone > > >> else?? > > >> > > >> > > >> YES, we have seen this behavior recently........the firmware is > > >> buggy and SB does not seem to know the meaning of regression > > >> testing, so they fix one thing only to have it break something else. > > >> We have wasted numerous hours in the last few weeks on installs > > >> where signal strength is great but IP traffic won't pass. We finally > > >> get it to work thru what seems to be magic. > > >> > > >> We have also seen problems on API, APPO and APPI's using the > > new > > >> firmware where the RSSI at the CPE is 90% but the unit won't > > >> associate. I've never seen this before. > > >> > > >> It sucks to be me. > > >> > > >> Bobby Bounds > > >> Airwave Internet, LLC > > >> > > >> > > >> > > >> ----- Original Message ----- > > >> From: Blazen Wireless > > >> To: [EMAIL PROTECTED] > > >> Sent: Sunday, October 19, 2003 11:17 AM > > >> Subject: [smartBridges] Beta 1.0.08 locking up ethernet > > anyone > > >> else?? > > >> > > >> > > >> Has anyone else seen this on any of the ABO or ABI units? > > >> I have had a few now that have NO more problems with > > >> reassociation > > >> to the tower yet about 2 -3 times a week the Ethernet TRANSMIT > > >> side shuts down as far as the statistics show when you log into > > >> the radio. It reports 1 and if you look at the receive side it is > > >> in the hundreds of thousands of bytes.. > > >> > > >> If you simply software reboot the radio it comes back alive > > and > > >> traffic starts to pass and both sides increment transmit and > > >> receive for a few days then it locks up again. It almost seems > > >> like when it auto reboots it does not bring up the Ethernet all > > >> the way. I have downgraded to 1.0.07 to confirm that it is in the > > >> firmware. This customer has about 85% rssi and 90% link quality so > > >> I don't see how it would be interference. > > >> > > >> > > >> > > >> > > >> > > >> Martin & Steve > > >> Blazen Wireless > > >> 909-326-5003 > > >> www.blazenwireless.com > > > > > > > > > S�mundur Johannsson Technician > > > eMax Wireless Internet > > > Hlidasmari 8 > > > 201 Kopavogur Iceland > > > Tel :(354) 5444454 > > > FAX :(354) 5444453 > > > www.emax.is > > > > > > ----------ANNOUNCEMENT---------- > > > Don't forget to register for WISPCON IV > > > http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm > > > > > > The PART-15.ORG smartBridges Discussion List > > > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > > > smartBridges <yournickname> > > > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe > > > smartBridges) > > > Archives: http://archives.part-15.org > > > > > > > > > S�mundur Johannsson Technician > > eMax Wireless Internet > > Hlidasmari 8 > > 201 Kopavogur Iceland > > Tel :(354) 5444454 > > FAX :(354) 5444453 > > www.emax.is > > > > ----------ANNOUNCEMENT---------- > > Don't forget to register for WISPCON IV > > http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm > > > > The PART-15.ORG smartBridges Discussion List > > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > > smartBridges <yournickname> > > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe > > smartBridges) > > Archives: http://archives.part-15.org > > > > > > ----------ANNOUNCEMENT---------- > > Don't forget to register for WISPCON IV > > http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm > > > > The PART-15.ORG smartBridges Discussion List > > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > > smartBridges <yournickname> > > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe > > smartBridges) > > Archives: http://archives.part-15.org > > > > ----------ANNOUNCEMENT---------- > > Don't forget to register for WISPCON IV > > http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm > > > > The PART-15.ORG smartBridges Discussion List > > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > smartBridges > > <yournickname> > > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe > > smartBridges) > > Archives: http://archives.part-15.org > > > > > Martin Moreno > Blazen Wireless > 909-326-5003 > www.blazenwireless.com > ----------ANNOUNCEMENT---------- > Don't forget to register for WISPCON IV > http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > smartBridges <yournickname> > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe > smartBridges) > Archives: http://archives.part-15.org > > ----------ANNOUNCEMENT---------- > Don't forget to register for WISPCON IV > http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges > <yournickname> > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe > smartBridges) > Archives: http://archives.part-15.org > Martin Moreno Blazen Wireless 909-326-5003 www.blazenwireless.com ----------ANNOUNCEMENT---------- Don't forget to register for WISPCON IV http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
