> > APs problems > > Hi ,, I have this problem with my Aps > > The costumers simply disconnect from the AP, lets say I have 11 clients > connected on one AP. When I look on assosiated window there are only 7 on > the AP, but only when I reset the AP then I get 11 clients back. This > problem is randomly on the system and I cant say that I can trust Smart > Bridge products because of many software problems, looking into new AP > solutions, not Smart Bridges.. :( > > > > Have tryed new firmware no result for this problem,,,,,
S�mundur Johannsson / eMax Iceland > > > > > > >> Well I had have all the latest firmware on my units. I think if anything >> needs to be stress tested it is here in town I think at last count we >> had >> at LEAST 6 WISPS doing battle trying to get a piece of the pie and I am >> NOT going to let the beat me.. I may have to go to 5.7 gear pretty quick >> unless I can get this isolated and resolved. I spend ore and more of my >> day taking calls from clients trouble shooting and resting units etc. >> Thats all part of our commitment to them especially like today I don't >> have to answer my cell phone but I do I care about my clients like I >> would >> have liked my 1st WISP would have done for me but then again thats why I >> now have more customers then them and they are really pissed.. >> >> I will say it again customer service is CRUCIAL to keeping a wisp going >> no >> matter how tiring it is to you.. >> >> >> >> >> ----- Original Message ----- >> From: Rudolph Worrell >> To: [EMAIL PROTECTED] >> Sent: Sunday, October 19, 2003 3:30 PM >> Subject: RE: [smartBridges] Beta 1.0.08 locking up Ethernet anyone >> else?? >> >> >> Looks like you guys are experiencing what I had a few weeks back when >> I >> lost my whole network and had to reset my APPO every time. >> >> I was not using the new firmware though. I also was using an APPT in >> CB >> mode to feed the APPO. I fixed it by using a separate APPO to link back >> to the APPT. I upgraded the firmware to the same version an it seems to >> be fine now. >> >> I also was doing changes when my APPO stopped associating with >> clients. >> Good Luck! >> -----Original Message----- >> From: [EMAIL PROTECTED] >> [mailto:[EMAIL PROTECTED] Behalf Of Blazen Wireless >> Sent: Sunday, October 19, 2003 5:16 PM >> To: [EMAIL PROTECTED] >> Subject: Re: [smartBridges] Beta 1.0.08 locking up ethernet anyone >> else?? >> >> >> Something else too now it appears not sure due to the firmware that >> some of the units are losing association to the APPO or the APPO is >> dropping clients I have 28 on this APPO and I have to reset it for 5 >> of the clients to reassociate? Its seems to be a little hotter today >> again it was cooling off. I would say its about 100% according to >> local weather forecasts.. Its been showing this symptom now for the >> past couple of days as it has been hotter.. >> >> I wish this was just all a bad dream... >> >> ----- Original Message ----- >> From: Bobby Bounds >> To: [EMAIL PROTECTED] >> Sent: Sunday, October 19, 2003 2:38 PM >> Subject: Re: [smartBridges] Beta 1.0.08 locking up ethernet anyone >> else?? >> >> >> YES, we have seen this behavior recently........the firmware is >> buggy and SB does not seem to know the meaning of regression >> testing, so they fix one thing only to have it break something else. >> We have wasted numerous hours in the last few weeks on installs >> where signal strength is great but IP traffic won't pass. We finally >> get it to work thru what seems to be magic. >> >> We have also seen problems on API, APPO and APPI's using the new >> firmware where the RSSI at the CPE is 90% but the unit won't >> associate. I've never seen this before. >> >> It sucks to be me. >> >> Bobby Bounds >> Airwave Internet, LLC >> >> >> >> ----- Original Message ----- >> From: Blazen Wireless >> To: [EMAIL PROTECTED] >> Sent: Sunday, October 19, 2003 11:17 AM >> Subject: [smartBridges] Beta 1.0.08 locking up ethernet anyone >> else?? >> >> >> Has anyone else seen this on any of the ABO or ABI units? >> I have had a few now that have NO more problems with >> reassociation >> to the tower yet about 2 -3 times a week the Ethernet TRANSMIT >> side shuts down as far as the statistics show when you log into >> the radio. It reports 1 and if you look at the receive side it is >> in the hundreds of thousands of bytes.. >> >> If you simply software reboot the radio it comes back alive and >> traffic starts to pass and both sides increment transmit and >> receive for a few days then it locks up again. It almost seems >> like when it auto reboots it does not bring up the Ethernet all >> the way. I have downgraded to 1.0.07 to confirm that it is in the >> firmware. This customer has about 85% rssi and 90% link quality so >> I don't see how it would be interference. >> >> >> >> >> >> Martin & Steve >> Blazen Wireless >> 909-326-5003 >> www.blazenwireless.com > > > S�mundur Johannsson Technician > eMax Wireless Internet > Hlidasmari 8 > 201 Kopavogur Iceland > Tel :(354) 5444454 > FAX :(354) 5444453 > www.emax.is > > ----------ANNOUNCEMENT---------- > Don't forget to register for WISPCON IV > http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > smartBridges <yournickname> > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe > smartBridges) > Archives: http://archives.part-15.org > S�mundur Johannsson Technician eMax Wireless Internet Hlidasmari 8 201 Kopavogur Iceland Tel :(354) 5444454 FAX :(354) 5444453 www.emax.is ----------ANNOUNCEMENT---------- Don't forget to register for WISPCON IV http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
