I do have a few clients that must unplug/replug their unit to get it to pass
traffic every so often.

I don�t see this on my MRTG graphs, because the units are responding on the
wireless side.

I am okay with things as is....for the moment.

I think the clients that are having troubles are still a few of the old (bad
hardware batch) June units with firmware upgrade.

Sully

-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
On Behalf Of Rudolph Worrell
Sent: Sunday, October 19, 2003 9:55 PM
To: [EMAIL PROTECTED]
Subject: RE: [smartBridges] Beta 1.0.08 locking up Ethernet anyone else??

Now that is good to hear because I plan to do this also.  I think the
biggest thing here is making the product stable.

-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of The Wirefree Network
Sent: Sunday, October 19, 2003 10:34 PM
To: [EMAIL PROTECTED]
Subject: RE: [smartBridges] Beta 1.0.08 locking up Ethernet anyone
else??


Huh????

I am sure that there are folks out there with more than this...but I have
60+ clients funneling through a single aPPo.

My backend is a single T-1 and everyone is unthrottled.

I pull about 40 Gig per month through the aPPo.

I plan on putting another 30 or so on this aPPo.

Sully

-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
On Behalf Of Martin Moreno
Sent: Sunday, October 19, 2003 8:29 PM
To: [EMAIL PROTECTED]
Subject: RE: [smartBridges] Beta 1.0.08 locking up Ethernet anyone else??

All my clietns are exaclty the same firmware etc.

In my personal opinion is that the SB stuff just cant handle the amoutn of
clients and traffic I am passing plain and simple. I need to find something
that is going to handle the capacity and it is most likely going to be in
another manufacturer and or freq.. I dont have time trouble shoot on a daily

basis. I have become a real bitch lately and my family and friends and
workes
have all noticed it. This happens when things just dont go right.





Quoting Kevin Proctor <[EMAIL PROTECTED]>:

> Are you SURE those clients have the latest firmware in them?  As in, I
> have physically checked each one?
>
> What is different about those clients from the ones that work just fine?
> There has to be something different and it is probably in your
> configuration.
>
> You can use SimpleDeploy to dump the settings so you can look at them
> side by side.  You can also use it to ensure that each and every radio
> has the exact same settings before it is ever given to the installer.
>
> Kevin B. Proctor
> Customer Service
> Internet and International Orders
> Electro Comm Distributing Inc
> 5015 Paris St
> Denver CO 90239
> USA
>
> Phone: +1-303-371-8182
>                 800-525-0173
> FAX:    +1-303-371-8158
>                 800-423-8018
> [EMAIL PROTECTED]
>
>
> -----Original Message-----
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] On Behalf Of Blazen Wireless
> Sent: Sunday, October 19, 2003 7:41 PM
> To: [EMAIL PROTECTED]
> Subject: Re: [smartBridges] Beta 1.0.08 locking up Ethernet anyone
> else??
>
> Just realized I didn't have the latest firmware on the APPO's I think
> for
> god reason I just loaded it on one APPO to test it and it seems the
> clients
> reasociate but VERY VERY VERY slow one every 10 seconds seems like?
> I had 27 now I am down to 18 associated clients and it is hung there?? I
> downgrade back to 1.0.08 and they reasociate in a second or two and I
> mean
> ALL my clients??
>
> Whats causing such a delayed response??
>
>
> ----- Original Message -----
> From: "S�mundur Johannsson" <[EMAIL PROTECTED]>
> To: <[EMAIL PROTECTED]>
> Sent: Sunday, October 19, 2003 4:37 PM
> Subject: Re: [smartBridges] Beta 1.0.08 locking up Ethernet anyone
> else??
>
>
>
> >
> > APs problems
> >
> > Hi ,, I have this problem with my Aps
> >
> > The costumers simply disconnect from the AP, lets say I have 11
> clients
> > connected on one AP. When I look on assosiated window there are only 7
> on
> > the AP, but only when I reset the AP then I get 11 clients back. This
> > problem is randomly on the system and I cant say that I can trust
> Smart
> > Bridge products because of many software problems, looking into new AP
> > solutions, not Smart Bridges.. :(
> >
> >
> >
> > Have tryed new firmware no result for this problem,,,,,
>
>
> S�mundur Johannsson / eMax Iceland
> >
> >
> >
> >
> >
> >
> >> Well I had have all the latest firmware on my units. I think if
> anything
> >> needs to be stress tested it is here in town I think at last count we
> >> had
> >> at LEAST 6 WISPS doing battle trying to get a piece of the pie and I
> am
> >> NOT going to let the beat me.. I may have to go to 5.7 gear pretty
> quick
> >> unless I can get this isolated and resolved. I spend ore and more of
> my
> >> day taking calls from clients trouble shooting and resting units etc.
> >> Thats all part of our commitment to them especially like today I
> don't
> >> have to answer my cell phone but I do I care about my clients like I
> >> would
> >> have liked my 1st WISP would have done for me but then again thats
> why I
> >> now have more customers then them and they are really pissed..
> >>
> >> I will say it again customer service is CRUCIAL to keeping a wisp
> going
> >> no
> >> matter how tiring it is to you..
> >>
> >>
> >>
> >>
> >>   ----- Original Message -----
> >>   From: Rudolph Worrell
> >>   To: [EMAIL PROTECTED]
> >>   Sent: Sunday, October 19, 2003 3:30 PM
> >>   Subject: RE: [smartBridges] Beta 1.0.08 locking up Ethernet anyone
> >> else??
> >>
> >>
> >>   Looks like you guys are experiencing what I had a few weeks back
> when
> >> I
> >> lost my whole network and had to reset my APPO every time.
> >>
> >>   I was not using the new firmware though.  I also was using an APPT
> in
> >> CB
> >> mode to feed the APPO.  I fixed it by using a separate APPO to link
> back
> >> to the APPT.  I upgraded the firmware to the same version an it seems
> to
> >> be fine now.
> >>
> >>   I also was doing changes when my APPO stopped associating with
> >> clients.
> >> Good Luck!
> >>     -----Original Message-----
> >>     From: [EMAIL PROTECTED]
> >> [mailto:[EMAIL PROTECTED] Behalf Of Blazen Wireless
> >>     Sent: Sunday, October 19, 2003 5:16 PM
> >>     To: [EMAIL PROTECTED]
> >>     Subject: Re: [smartBridges] Beta 1.0.08 locking up ethernet
> anyone
> >> else??
> >>
> >>
> >>     Something else too now it appears not sure due to the firmware
> that
> >> some of the units are losing association to the APPO or the APPO is
> >> dropping clients I have 28 on this APPO and I have to reset it for 5
> >> of the clients to reassociate? Its seems to be a little hotter today
> >> again it was cooling off. I would say its about 100% according to
> >> local weather forecasts.. Its been showing this symptom now for the
> >> past couple of days as it has been hotter..
> >>
> >>     I wish this was just all a bad dream...
> >>
> >>       ----- Original Message -----
> >>       From: Bobby Bounds
> >>       To: [EMAIL PROTECTED]
> >>       Sent: Sunday, October 19, 2003 2:38 PM
> >>       Subject: Re: [smartBridges] Beta 1.0.08 locking up ethernet
> anyone
> >> else??
> >>
> >>
> >>       YES, we have seen this behavior recently........the firmware is
> >> buggy and SB does not seem to know the meaning of regression
> >> testing, so they fix one thing only to have it break something else.
> >> We have wasted numerous hours in the last few weeks on installs
> >> where signal strength is great but IP traffic won't pass. We finally
> >> get it to work thru what seems to be magic.
> >>
> >>       We have also seen problems on API, APPO and APPI's using the
> new
> >> firmware where the RSSI at the CPE is 90% but the unit won't
> >> associate. I've never seen this before.
> >>
> >>       It sucks to be me.
> >>
> >>       Bobby Bounds
> >>       Airwave Internet, LLC
> >>
> >>
> >>
> >>         ----- Original Message -----
> >>         From: Blazen Wireless
> >>         To: [EMAIL PROTECTED]
> >>         Sent: Sunday, October 19, 2003 11:17 AM
> >>         Subject: [smartBridges] Beta 1.0.08 locking up ethernet
> anyone
> >> else??
> >>
> >>
> >>         Has anyone else seen this on any of the ABO or ABI units?
> >>         I have had a few now that have NO more problems with
> >> reassociation
> >> to the tower yet about 2 -3 times a week the Ethernet TRANSMIT
> >> side shuts down as far as the statistics show when you log into
> >> the radio. It reports 1 and if you look at the receive side it is
> >> in the hundreds of thousands of bytes..
> >>
> >>         If you simply software reboot the radio it comes back alive
> and
> >> traffic starts to pass and both sides increment transmit and
> >> receive for a few days then it locks up again. It almost seems
> >> like when it auto reboots it does not bring up the Ethernet all
> >> the way. I have downgraded to 1.0.07 to confirm that it is in the
> >> firmware. This customer has about 85% rssi and 90% link quality so
> >> I don't see how it would be interference.
> >>
> >>
> >>
> >>
> >>
> >>         Martin & Steve
> >>         Blazen Wireless
> >>         909-326-5003
> >>         www.blazenwireless.com
> >
> >
> > S�mundur Johannsson Technician
> > eMax Wireless Internet
> > Hlidasmari 8
> > 201 Kopavogur Iceland
> > Tel :(354) 5444454
> > FAX :(354) 5444453
> > www.emax.is
> >
> > ----------ANNOUNCEMENT----------
> > Don't forget to register for WISPCON IV
> > http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm
> >
> > The PART-15.ORG smartBridges Discussion List
> > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
> > smartBridges <yournickname>
> > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe
> > smartBridges)
> > Archives: http://archives.part-15.org
> >
>
>
> S�mundur Johannsson Technician
> eMax Wireless Internet
> Hlidasmari 8
> 201 Kopavogur Iceland
> Tel :(354) 5444454
> FAX :(354) 5444453
> www.emax.is
>
> ----------ANNOUNCEMENT----------
> Don't forget to register for WISPCON IV
> http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm
>
> The PART-15.ORG smartBridges Discussion List
> To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
> smartBridges <yournickname>
> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe
> smartBridges)
> Archives: http://archives.part-15.org
>
>
> ----------ANNOUNCEMENT----------
> Don't forget to register for WISPCON IV
> http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm
>
> The PART-15.ORG smartBridges Discussion List
> To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
> smartBridges <yournickname>
> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe
> smartBridges)
> Archives: http://archives.part-15.org
>
> ----------ANNOUNCEMENT----------
> Don't forget to register for WISPCON IV
> http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm
>
> The PART-15.ORG smartBridges Discussion List
> To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
smartBridges
> <yournickname>
> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe
> smartBridges)
> Archives: http://archives.part-15.org
>


Martin Moreno
Blazen Wireless
909-326-5003
www.blazenwireless.com
----------ANNOUNCEMENT----------
Don't forget to register for WISPCON IV
http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm

The PART-15.ORG smartBridges Discussion List
To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
smartBridges <yournickname>
To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe
smartBridges)
Archives: http://archives.part-15.org

----------ANNOUNCEMENT----------
Don't forget to register for WISPCON IV
http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm

The PART-15.ORG smartBridges Discussion List
To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
smartBridges <yournickname>
To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe
smartBridges)
Archives: http://archives.part-15.org

----------ANNOUNCEMENT----------
Don't forget to register for WISPCON IV
http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm

The PART-15.ORG smartBridges Discussion List
To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
smartBridges <yournickname>
To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe
smartBridges)
Archives: http://archives.part-15.org  

----------ANNOUNCEMENT----------
Don't forget to register for WISPCON IV
http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm

The PART-15.ORG smartBridges Discussion List
To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges 
<yournickname>
To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges)
Archives: http://archives.part-15.org

Reply via email to