That would be true. You would have to build your own reset switch to add inline after the POE. I still cant remember if you short pin 4 to ground or apply a voltage. Can anyone confirm this?
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Dan Petermann Sent: Thursday, October 30, 2003 1:29 AM To: [EMAIL PROTECTED] Subject: Re: [smartBridges] Pins for PoE on AirBridge Outdoor I haven't verified this myself (I'm on the road planning new AP sites), a co-worker of mine said that you can't reset the radio thru the Motorola surge suppressor. At 01:44 AM 10/29/2003 -0600, you wrote: >Yes. Same as Canopy. And yes, I installed some that were DOA too. > > >----- Original Message ----- >From: "Dan Petermann" <[EMAIL PROTECTED]> >To: <[EMAIL PROTECTED]> >Sent: Monday, October 27, 2003 9:22 AM >Subject: Re: [smartBridges] Pins for PoE on AirBridge Outdoor > > > > Motorola 3000 Surge protector. > > > > Is this the same as what Canopy uses? > > > > If so, then yes it works. I've got a bunch out in the field and no >problems > > except for some that were bad from the factory. > > > > At 08:36 PM 10/25/2003 -0500, you wrote: > > >----- Original Message ----- > > >From: "Tom Haynes" <[EMAIL PROTECTED]> > > >To: <[EMAIL PROTECTED]> > > >Sent: Saturday, October 25, 2003 1:35 AM > > >Subject: RE: [smartBridges] Pins for PoE on AirBridge Outdoor > > > > > > > > > > Looking at the pin side of the rj45 plug (not jack) > > > > 1- orange w/ stripe > > > > 2- orange > > > > 3- green w/ stripe > > > > 4- blue > > > > 5- blue w/ stripe > > > > 6- green > > > > 7- brown w/ stripe > > > > 8- brown > > > > > > > > 4 = Remote reset (short to ground for reset) > > > > 5 = Gnd > > > > 7,8 = Vcc + > > > > > >This pinout is interesting. Has anyone else used the Motorola 3000 Surge > > >protector with smartBridges? The two devices seem to be compatible, but >when > > >I use a CAT5 tester on the cable running through the Motorola surge > > >protector, it indicates that pins 4-5 are shorted together and the 7-8 >pins > > >are shorted together. > > > > > >----------ANNOUNCEMENT---------- > > >Don't forget to register for WISPCON IV > > >http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm > > > > > >The PART-15.ORG smartBridges Discussion List > > >To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > > >smartBridges <yournickname> > > >To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe > > >smartBridges) > > >Archives: http://archives.part-15.org > > > > > > ----------ANNOUNCEMENT---------- > > Don't forget to register for WISPCON IV > > http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm > > > > The PART-15.ORG smartBridges Discussion List > > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe >smartBridges <yournickname> > > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe >smartBridges) > > Archives: http://archives.part-15.org > >----------ANNOUNCEMENT---------- >Don't forget to register for WISPCON IV >http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm > >The PART-15.ORG smartBridges Discussion List >To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe >smartBridges <yournickname> >To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe >smartBridges) >Archives: http://archives.part-15.org ----------ANNOUNCEMENT---------- Don't forget to register for WISPCON IV http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org ----------ANNOUNCEMENT---------- Don't forget to register for WISPCON IV http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
