----- Original Message ----- From: "Tom Haynes" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Saturday, October 25, 2003 1:35 AM Subject: RE: [smartBridges] Pins for PoE on AirBridge Outdoor
> Looking at the pin side of the rj45 plug (not jack) > 1- orange w/ stripe > 2- orange > 3- green w/ stripe > 4- blue > 5- blue w/ stripe > 6- green > 7- brown w/ stripe > 8- brown > > 4 = Remote reset (short to ground for reset) > 5 = Gnd > 7,8 = Vcc + This pinout is interesting. Has anyone else used the Motorola 3000 Surge protector with smartBridges? The two devices seem to be compatible, but when I use a CAT5 tester on the cable running through the Motorola surge protector, it indicates that pins 4-5 are shorted together and the 7-8 pins are shorted together. ----------ANNOUNCEMENT---------- Don't forget to register for WISPCON IV http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
