On 03/04/2014 01:57 PM, Dewey Hylton wrote:
From: "Joe Landman" <[email protected]> To:
[email protected] Sent: Tuesday, March 4, 2014
1:05:15 PM Subject: Re: [smartos-discuss] troubleshooting
smartos/supermicro
<snip>
1) use the
ipmitool -I lanplus -H machine_ipmi_addr -U ADMIN -P ADMIN sol \
activate
and log in. Note which tty you are on. Once you have that,
adjust the --unit=1 to reflect this. ttya -> unit=0 , ttyb ->
unit=1 , and so on
this part worries me ... this is listed prior to rebooting; i've done
this and received no error, but i see no login prompt nor data of any
kind either. i don't see anywhere in the ipmi configuration to enable
serial over lan - just a place to launch a sol connection. smartos
shows a ttymon process running for both ttya/ttyb. what am i
missing?
You should be able to get your tty with a 'w' or 'whoami' command. You
did this before you rebooted, right?
------------------------------------------- smartos-discuss Archives:
https://www.listbox.com/member/archive/184463/=now RSS Feed:
https://www.listbox.com/member/archive/rss/184463/23047814-09eabc15
Modify Your Subscription:
https://www.listbox.com/member/?&;
Powered by Listbox: http://www.listbox.com
--
Joseph Landman, Ph.D
Founder and CEO
Scalable Informatics, Inc.
email: [email protected]
web : http://scalableinformatics.com
twtr : @scalableinfo
phone: +1 734 786 8423 x121
cell : +1 734 612 4615
-------------------------------------------
smartos-discuss
Archives: https://www.listbox.com/member/archive/184463/=now
RSS Feed: https://www.listbox.com/member/archive/rss/184463/25769125-55cfbc00
Modify Your Subscription:
https://www.listbox.com/member/?member_id=25769125&id_secret=25769125-7688e9fb
Powered by Listbox: http://www.listbox.com
