On Tue, Mar 04, 2014 at 02:22:13PM -0500, Dewey Hylton wrote: > i have not yet rebooted. i connected via ipmitool to determine the proper > tty, but got no response: > > $ ipmitool -H smartos2-ipmi -I lanplus -U dewey sol activate > Password: > [SOL Session operational. Use ~? for help] > ~. [terminated ipmitool] > > i tried this with ipmitool installed with smartos as well as ipmitool > installed from packages on openbsd 5.4; both showed the same thing.
Note that you have to set the console at boot time to have the *console* be on the SoL device; however... > logging into smartos, i see the following: > > # ps wax|grep [t]ty > 2275 console S 0:00 /usr/lib/saf/ttymon -g -d /dev/wscons -l console -m > ldterm,ttcompat -h -p smartos02 wscons login: > 2298 term/a S 0:00 /usr/lib/saf/ttymon -g -d /dev/term/a -l 115200 -T > xterm -m ldterm,ttcompat -h -p smartos02 ttya login: > 2297 term/b S 0:00 /usr/lib/saf/ttymon -g -d /dev/term/b -l 115200 -T > xterm -m ldterm,ttcompat -h -p smartos02 ttyb login: We do create gettys on both devices by default. > this shows a ttymon for each of the virtual consoles, the keyboard/monitor > console, and ttya/ttyb serial ports. is it possible that ipmitool is > connecting to ttyc where there is no monitor? It's possible. You'll need to check your board docs and/or firmware settings. ------------------------------------------- smartos-discuss Archives: https://www.listbox.com/member/archive/184463/=now RSS Feed: https://www.listbox.com/member/archive/rss/184463/25769125-55cfbc00 Modify Your Subscription: https://www.listbox.com/member/?member_id=25769125&id_secret=25769125-7688e9fb Powered by Listbox: http://www.listbox.com
