Soren Kristensen wrote: > Hi Everybody, > > Gaëtan Minet wrote: >> Hi >> >> I just received a new net5501-70 with the "official" case and power >> supply, and I experience what looks like time-related startup problems. >> >> Indeed, each time I plug the power in _after the unit has been powered >> off for more than 10 seconds_ , the power and error leds stay on >> forever and the system seems completely freezed (+ the third ide led >> if a CF is plugged in). Nothing appears on the serial port, I don't >> even see the POST messages, memory count, pci list, ... >> If I then unplug and plug again the psu "quickly" (in less than ~10 >> seconds), it usually starts correctly. >> >> Any Idea what could cause this problem ? >> >> The board is completely 'empty' (no CF/IDE/SATA/USB/MINIPCI/Network >> cable is plugged), it is just as received. >> I had the same problem with another 5501-70 that has just been >> exchanged by this one for this reason. Additionally, the first one had >> the RTC issue but this one doesn't. >> Would this board be faulty (too) ? > > Assuming the usual checks (power supply ok, battery fully charged), then > the net5501 should startup correctly every time, otherwise there is some > defect somewhere.... > > If so, follow standard procedure: > > email [EMAIL PROTECTED] with a detailed description of the problem and > I'll take it from there.
I just want to chime in that we had the same problem with some 5501. It was kind of transient, though, the systems seem to well behave now (I hope....) - Marc Balmer > > > Best Regards, > > > Soren Kristensen > > CEO & Chief Engineer > Soekris Engineering, Inc. > _______________________________________________ > Soekris-tech mailing list > [email protected] > http://lists.soekris.com/mailman/listinfo/soekris-tech _______________________________________________ Soekris-tech mailing list [email protected] http://lists.soekris.com/mailman/listinfo/soekris-tech
