Hi Soren Do you have news about this issue ? I sent several emails but haven't received an answer yet. Have you received them ?
Kind regards On 19/11/2007, at 21:40, Soren Kristensen wrote: > Hi Everybody, > > Gaëtan Minet wrote: >> Hi >> I just received a new net5501-70 with the "official" case and >> power supply, and I experience what looks like time-related >> startup problems. >> Indeed, each time I plug the power in _after the unit has been >> powered off for more than 10 seconds_ , the power and error leds >> stay on forever and the system seems completely freezed (+ the >> third ide led if a CF is plugged in). Nothing appears on the >> serial port, I don't even see the POST messages, memory count, pci >> list, ... >> If I then unplug and plug again the psu "quickly" (in less than >> ~10 seconds), it usually starts correctly. >> Any Idea what could cause this problem ? >> The board is completely 'empty' (no CF/IDE/SATA/USB/MINIPCI/ >> Network cable is plugged), it is just as received. >> I had the same problem with another 5501-70 that has just been >> exchanged by this one for this reason. Additionally, the first one >> had the RTC issue but this one doesn't. >> Would this board be faulty (too) ? > > Assuming the usual checks (power supply ok, battery fully charged), > then the net5501 should startup correctly every time, otherwise > there is some defect somewhere.... > > If so, follow standard procedure: > > email [EMAIL PROTECTED] with a detailed description of the problem > and I'll take it from there. > > > Best Regards, > > > Soren Kristensen > > CEO & Chief Engineer > Soekris Engineering, Inc. _______________________________________________ Soekris-tech mailing list [email protected] http://lists.soekris.com/mailman/listinfo/soekris-tech
