Sorry, I was responding to Craig's post : "Would Apendix 8.17.2.4.1 indicate that the intent of the code is to require that the 4" must tie in to a 4" main?"
Russell Rewis Brown Automatic Sprinklers, Inc. 107C Hemlock Street Valdosta, Georgia 31601 229-244-8130 [EMAIL PROTECTED] -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Russell Sent: Friday, July 18, 2008 1:14 PM To: [email protected] Subject: RE: RE: FDC Connection Not in my opinion. Because 13 does not say in undeniable words how it is done you would need to stop thinking in terms of "code" and thinking rather in "rational" or "real world". I would look at the overall system configuration, type hazard, hydraulic calculations if available, water supply flow and pressure, pipe size changes from fdc to opposite end of system and the size of pipe the fdc is connecting to. You certainly wouldn't consider 1" pipe for instance unless it may be 13r perhaps. With all that consider that it is being supplemented with about 150 psi residual water input to a system that otherwise would never see 150 psi. Few ever have. Russell Rewis Brown Automatic Sprinklers, Inc. 107C Hemlock Street Valdosta, Georgia 31601 229-244-8130 [EMAIL PROTECTED] _______________________________________________ Sprinklerforum mailing list [email protected] http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum To Unsubscribe, send an email to:[EMAIL PROTECTED] (Put the word unsubscribe in the subject field) No virus found in this incoming message. Checked by AVG - http://www.avg.com Version: 8.0.138 / Virus Database: 270.5.1/1560 - Release Date: 7/18/2008 6:47 AM _______________________________________________ Sprinklerforum mailing list [email protected] http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum To Unsubscribe, send an email to:[EMAIL PROTECTED] (Put the word unsubscribe in the subject field)
