If they're so worried about contamination maybe they should use stainless or copper and have all welds certified by a nuclear welder.
On Tue, May 12, 2009 at 10:01 AM, Ed Kramer <[email protected]> wrote: > Gotta 'second' Thom's suggestion - go with 6x6x2 galv tees (Groove x Groove > with 2" outlet either grooved or threaded). Eliminates the QC issue with > 'galvanizing from a can'. Victaulic makes these (and likely others). > > Ed Kramer > >> >> The area being protect is part of a food processing plant. The client >> is >> concerned about mechanical fittings leaking and contaminating large >> batches >> of food. > > _______________________________________________ > Sprinklerforum mailing list > http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum > For Technical Assistance, send an email to: [email protected] > > To Unsubscribe, send an email to:[email protected] > (Put the word unsubscribe in the subject field) > -- Ron Greenman at home.... _______________________________________________ Sprinklerforum mailing list http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum For Technical Assistance, send an email to: [email protected] To Unsubscribe, send an email to:[email protected] (Put the word unsubscribe in the subject field)
