Hey Andrew, I can tell you from experience that multipathing just won't work properly with the Xserve RAID with either the LSI or Qlogic HBAs.
-J On Feb 4, 2008 4:03 PM, Andrew Hurt <[EMAIL PROTECTED]> wrote: > That' s where my knowledge deficit kicks in ;-) I'm not really doing anything > other than setting mpxio-disable=no in /kernel/drv/fp.conf. Also, I have made > the following entry in /kernel/drv/scsi_vhci.conf with the magical > 8-characters-even-if-it's-whitespace jazz for the VID: > > device-type-scsi-options-list = > "APPLE Xserve RAID", "symmetric-option"; > symmetric-option = 0x1000000; > > These were the only specifics I've found in my meanderings online. Most of > the things I've read about multipathing on Solaris 10 08/07 x86 led me to > believe that this was all that was required and the drivers automagically do > the rest. > > > This message posted from opensolaris.org > _______________________________________________ > storage-discuss mailing list > [email protected] > http://mail.opensolaris.org/mailman/listinfo/storage-discuss > _______________________________________________ storage-discuss mailing list [email protected] http://mail.opensolaris.org/mailman/listinfo/storage-discuss
