on 9/11/02 3:52 PM, Pastor Mac at [EMAIL PROTECTED] wrote: > Based on the material gleaned from the Repair FAQ website Jeff W. so > kindly passed along (http://www.repairfaq.org) it seems the power > supply start up circuit which passes a voltage to the flyback module > is not passing sufficient voltage. Likely a swap out could be done > but a proper diagram would be necessary to find the correct circuit. > And unless one works with this stuff routinely, it is not for the > feint of heart. The guy I talked to today wanted a $100 just to look > inside. Considering a new 17" CRT can be had for $150, I guess the > KDS monitor is now officially headed for a recycler.
It's probably best to get rid of it Pax. I've taken hoods off to adjust convergence, but it's a scary place for me even with the appropriate plastic tools. Even unplugged, CRT's have enough stored energy to be extremely dangerous for the untrained. It's probably a good thing that CRT's are slowly going the way of the dinosaur. -Howie -- SuperMacs is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | Service & Replacement Parts [EMAIL PROTECTED] | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> SuperMacs list info: <http://lowendmac.com/supermacs/list.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive: <http://www.mail-archive.com/supermacs%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
