Jeff Walther wrote:
> You probably have the monitor on the VGA port. Put a Mac to VGA > monitor on the Mac port (DB15) and connect your monitor that way. > The Mac port will read the sense codes from the adapter and set your > monitor resolution properly, assuming you properly set the resolution > on the adapter. ------ Just to add a bit of twist to this mix, for some reason I never had to use the adapter and have always used the VGA port on the Twin Turbo (4 mb) and Ultimate Rez (8mb), both non-Apple ROM'd, on the S900. Started out new with the s900 and a SONY Multiscan 19" on the Twin Turbo and then on the Ultimate Rez. This is from OS 8 up to 9.1 and the occasional updates to the card drivers. I do have two adapters, one a Griffin with two rows of switches and another with no switches. Sortof ended up with them over the years. Alan -- SuperMacs is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | Service & Replacement Parts [EMAIL PROTECTED] | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> SuperMacs list info: <http://lowendmac.com/supermacs/list.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive: <http://www.mail-archive.com/supermacs%40mail.maclaunch.com/> --------------------------------------------------------------- >The Think Different Store http://www.ThinkDifferentStore.com ---------------------------------------------------------------
