Ahhh - I thought you meant configurable in the UE GUI. Customers are calling saying that they are in the middle of doing something and get booted so it's not because of idle. The tweaks that support did on Sunday had no effect that I can see. From Nick's email to the list an hour ago it sounds like they are still working on it.

Ian


On 08/08/2016 11:44 AM, Matthew Carpenter wrote:
Yes, when UE's have nothing to do they will go to sleep. If anything hits the LAN port they wake up. They do check if the eNB is sending them any data also. You can see the Active vs. Registered in Breezeview. About 1 year ago we had an issue where a couple of UE's would not wake up until a hard reboot was done.


Matt Carpenter


On Mon, Aug 8, 2016 at 9:25 AM, Ian Fraser <[email protected] <mailto:[email protected]>> wrote:


    Going to sleep ?  There's an sleep timer somewhere ?



    On 07/08/2016 11:29 AM, Matthew Carpenter wrote:
    We are using the EPC in a central/datacenter configuration.  The
    eNB's are fed by fiber or by licensed link.
    Sure we have an issue once in a while, Telrad support jumps on it
    and gets it fixed quickly.

    82 UE's over 4 eNB's and running good.  I am in 2x4(receive) mode
    currently.
    What going on with RF power?

    Not seeing the reconnect issues that you guys have been talking
    about. Is the UE just going to sleep?

    MattCarpenter


    On Sat, Aug 6, 2016 at 6:16 PM, Steve Cole <[email protected]
    <mailto:[email protected]>> wrote:

        On 8/4/2016 8:46 AM, Skywerx Support wrote:
        > I have enb's with over 80 clients offering mixed packages
of 3, 5, 10, 15, and 20 Mbps services. No complaints here. You obviously have something messed up.
        Eh, no.  10Mhz is the biggest channel we can run and we did some
        downtilt.  When we can go higher channel widths (we are our
        own worst
        interference with WiMax), and pull out the barrier channels,
        it will be
        better.  But that won't fix the EPC, it won't fix the RF
        power, and it
        won't fix the reconnect issue.

        The rest we have plenty of capacity.  The bottleneck at
        present is
        Telrad, no questions about it.
        _______________________________________________
        Telrad mailing list
        [email protected] <mailto:[email protected]>
        http://lists.wispa.org/mailman/listinfo/telrad
        <http://lists.wispa.org/mailman/listinfo/telrad>




-- *Matthew Carpenter*
    *806-316-5071 <tel:806-316-5071> office*
    *806-236-9558 <tel:806-236-9558> cell*




    _______________________________________________
    Telrad mailing list
    [email protected] <mailto:[email protected]>

    _______________________________________________ Telrad mailing
    list [email protected] <mailto:[email protected]>
    http://lists.wispa.org/mailman/listinfo/telrad
<http://lists.wispa.org/mailman/listinfo/telrad>
--
*Matthew Carpenter*
*806-316-5071 office*
*806-236-9558 cell*

_______________________________________________
Telrad mailing list
[email protected]
http://lists.wispa.org/mailman/listinfo/telrad
_______________________________________________
Telrad mailing list
[email protected]
http://lists.wispa.org/mailman/listinfo/telrad

Reply via email to