Dumb question time
- do you assign a "management IP" to the UE? If you use the UE's public
IP to manage it then wouldn't you be routing asymmetrically ? unless
you're using source routing management traffic to get to the UE ?
Ian
On 16/11/2016 11:49 AM, Adam Moffett wrote:
If you're using one default bearer, then your management traffic to
the CPE is in the same bucket with customer traffic. In that case you
could see packet loss to CPE when the customer does anything to occupy
the pipe. Dave Clelland suggested we create a dedicated bearer for
management traffic in order to avoid that.
On the other issues I have no input. We're just diving in ourselves.
-Adam
------ Original Message ------
From: "Dan Petermann" <[email protected] <mailto:[email protected]>>
To: [email protected] <mailto:[email protected]>
Sent: 11/15/2016 5:50:14 PM
Subject: [Telrad] Issues
We are seeing the following issues with our Telrad Gear. Is anybody
else seeing the same/similar issues?
1) Issues with slower than expected upload speeds. Packet loss to
SM’s. Download speeds slower than expected.
2)VPLS customers losing their capability to pass data until the EPC
is rebooted. During the same timeframe access to the UE is fine.
3)Issues with VPN connections through VPLS setups.
_______________________________________________
Telrad mailing list
[email protected]
http://lists.wispa.org/mailman/listinfo/telrad
_______________________________________________
Telrad mailing list
[email protected]
http://lists.wispa.org/mailman/listinfo/telrad
