Are you talking about in a VPLS setup?
Otherwise is it even possible to assign a management IP side of the UE's IP
it's assigned by the EPC?

On Wed, Nov 16, 2016 at 11:17 AM, Ian Fraser <[email protected]> wrote:

>
> Dumb question time
>
> - do you assign a "management IP" to the UE?  If you use the UE's public
> IP to manage it then wouldn't you be routing asymmetrically ? unless you're
> using source routing management traffic to get to the UE ?
>
> Ian
>
> On 16/11/2016 11:49 AM, Adam Moffett wrote:
>
> If you're using one default bearer, then your management traffic to the
> CPE is in the same bucket with customer traffic.  In that case you could
> see packet loss to CPE when the customer does anything to occupy the pipe.
> Dave Clelland suggested we create a dedicated bearer for management traffic
> in order to avoid that.
>
> On the other issues I have no input.  We're just diving in ourselves.
>
> -Adam
>
> ------ Original Message ------
> From: "Dan Petermann" <[email protected]>
> To: [email protected]
> Sent: 11/15/2016 5:50:14 PM
> Subject: [Telrad] Issues
>
>
> We are seeing the following issues with our Telrad Gear.  Is anybody else
> seeing the same/similar issues?
>
> 1)       Issues with slower than expected upload speeds.  Packet loss to
> SM’s.  Download speeds slower than expected.
> 2)      VPLS customers losing their capability to pass data until the EPC
> is rebooted.  During the same timeframe access to the UE is fine.
> 3)      Issues with VPN connections through VPLS setups.
>
>
>
> _______________________________________________
> Telrad mailing 
> [email protected]http://lists.wispa.org/mailman/listinfo/telrad
>
>
>
> _______________________________________________
> Telrad mailing list
> [email protected]
> http://lists.wispa.org/mailman/listinfo/telrad
>
>


-- 

Adair Winter
VP, Network Operations / Co-Owner
Amarillo Wireless | 806.316.5071
C: 806.231.7180
http://www.amarillowireless.net
<http://www.amarillowireless.net>
_______________________________________________
Telrad mailing list
[email protected]
http://lists.wispa.org/mailman/listinfo/telrad

Reply via email to