It's easy: let it run with the power on, what else? What exactly do you mean: no PC and what instead of the PC? Trimble products generally use the TSIP protocol, not a human readable one like the NMEA. Yes, the NMEA isn't easy to read but usually you can figure out date, time, lat/lon and 3D fix present or not. With the TrimbleStudio you can configure the GPS to put out the NMEA sentences (I think, I have no experience with the SMT but usually the GPSes from Trimble can be configured to some extent).
On Mon, Jun 25, 2012 at 1:18 PM, Erno Peres <[email protected]> wrote: > > Hi, > > anybody having some experience with this board..???? > I have the following problem....after power on the board it does not > output any msg only if I use the " TrimbleStudio SMT " software......on > my PC...... > Is there any solution to use the board without the PC/software ??????? > > Thanks a lot for any usefull advise. > > Rgds Ernie. > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
