Azelio, As I said NO any type of msg comes out from the board....only When I use the " TrimbleStudio SMT " software which seems to me it sending some kind of initialization to the board.....
Rgds Ernie. -----Original Message----- From: Azelio Boriani <[email protected]> To: Discussion of precise time and frequency measurement <[email protected]> Sent: Mon, Jun 25, 2012 2:06 pm Subject: Re: [time-nuts] Trimble SMT board A quick look at the Trimble Resolution SMT GPS revealed that the TSIP acket 0x7A can manage the NMEA output: what sentences and their time nterval so the TrimbleStudio must have that option. On Mon, Jun 25, 2012 at 1:58 PM, Azelio Boriani <[email protected]>wrote: > It's easy: let it run with the power on, what else? What exactly do you mean: no PC and what instead of the PC? Trimble products generally use the TSIP protocol, not a human readable one like the NMEA. Yes, the NMEA isn't easy to read but usually you can figure out date, time, lat/lon and 3D fix present or not. With the TrimbleStudio you can configure the GPS to put out the NMEA sentences (I think, I have no experience with the SMT but usually the GPSes from Trimble can be configured to some extent). On Mon, Jun 25, 2012 at 1:18 PM, Erno Peres <[email protected]> wrote: > > Hi, > > anybody having some experience with this board..???? > I have the following problem....after power on the board it does not > output any msg only if I use the " TrimbleStudio SMT " software......on > my PC...... > Is there any solution to use the board without the PC/software ??????? > > Thanks a lot for any usefull advise. > > Rgds Ernie. > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > ______________________________________________ ime-nuts mailing list -- [email protected] o unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts nd follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
