A quick look at the Trimble Resolution SMT GPS revealed that the TSIP packet 0x7A can manage the NMEA output: what sentences and their time interval so the TrimbleStudio must have that option.
On Mon, Jun 25, 2012 at 1:58 PM, Azelio Boriani <[email protected]>wrote: > It's easy: let it run with the power on, what else? What exactly do you > mean: no PC and what instead of the PC? Trimble products generally use the > TSIP protocol, not a human readable one like the NMEA. Yes, the NMEA isn't > easy to read but usually you can figure out date, time, lat/lon and 3D fix > present or not. With the TrimbleStudio you can configure the GPS to put out > the NMEA sentences (I think, I have no experience with the SMT but usually > the GPSes from Trimble can be configured to some extent). > > > On Mon, Jun 25, 2012 at 1:18 PM, Erno Peres <[email protected]> wrote: > >> >> Hi, >> >> anybody having some experience with this board..???? >> I have the following problem....after power on the board it does not >> output any msg only if I use the " TrimbleStudio SMT " software......on >> my PC...... >> Is there any solution to use the board without the PC/software ??????? >> >> Thanks a lot for any usefull advise. >> >> Rgds Ernie. >> _______________________________________________ >> time-nuts mailing list -- [email protected] >> To unsubscribe, go to >> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts >> and follow the instructions there. >> > > _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
