tinc
Thread
Date
Earlier messages
Later messages
Messages by Thread
Packet capture to analysis the tinc connection close
Bright Zhao
Re: Packet capture to analysis the tinc connection close
Guus Sliepen
Re: Packet capture to analysis the tinc connection close
Bright Zhao
Re: Packet capture to analysis the tinc connection close
Bright Zhao
Re: Packet capture to analysis the tinc connection close
Guus Sliepen
Re: Packet capture to analysis the tinc connection close
Etienne Dechamps
Re: Packet capture to analysis the tinc connection close
Guus Sliepen
Re: Packet capture to analysis the tinc connection close
Bright Zhao
Re: Packet capture to analysis the tinc connection close
Bright Zhao
Re: Packet capture to analysis the tinc connection close
Guus Sliepen
request for advice to increase throughput and lower latency
Jelle de Jong
Re: request for advice to increase throughput and lower latency
Guus Sliepen
[Announcement] Tinc versions 1.0.32 and 1.1pre15 released
Guus Sliepen
Re: [Announcement] Tinc versions 1.0.32 and 1.1pre15 released
Nirmal Thacker
Re: [Announcement] Tinc versions 1.0.32 and 1.1pre15 released
Guus Sliepen
Re: [Announcement] Tinc versions 1.0.32 and 1.1pre15 released
Guillermo Bisheimer
Re: [Announcement] Tinc versions 1.0.32 and 1.1pre15 released
Etienne Dechamps
Re: [Announcement] Tinc versions 1.0.32 and 1.1pre15 released
Guillermo Bisheimer
Re: [Announcement] Tinc versions 1.0.32 and 1.1pre15 released
Etienne Dechamps
Got KEY_CHANGED from A (x.x.x.x port 655) origin B which does not exist
Bright Zhao
Behavior like -R and -L SSH
Rafael Wolf
Re: Behavior like -R and -L SSH
Guus Sliepen
using both ConnectTo and AutoConnect to avoid network partitions
Nirmal Thacker
Re: using both ConnectTo and AutoConnect to avoid network partitions
Guus Sliepen
Re: using both ConnectTo and AutoConnect to avoid network partitions
Nirmal Thacker
Re: using both ConnectTo and AutoConnect to avoid network partitions
Guus Sliepen
Re: using both ConnectTo and AutoConnect to avoid network partitions
Nirmal Thacker
Re: using both ConnectTo and AutoConnect to avoid network partitions
Guus Sliepen
Re: using both ConnectTo and AutoConnect to avoid network partitions
Nirmal Thacker
Re: using both ConnectTo and AutoConnect to avoid network partitions
Guus Sliepen
Re: using both ConnectTo and AutoConnect to avoid network partitions
Nirmal Thacker
Re: using both ConnectTo and AutoConnect to avoid network partitions
Guus Sliepen
Re: using both ConnectTo and AutoConnect to avoid network partitions
Nirmal Thacker
What if two tinc daemons received the same Subnet but with different weight?
Bright Zhao
Re: What if two tinc daemons received the same Subnet but with different weight?
Guus Sliepen
Re: What if two tinc daemons received the same Subnet but with different weight?
Bright Zhao
Re: What if two tinc daemons received the same Subnet but with different weight?
Guus Sliepen
How to set tinc not to forward Subnet learned from other nodes?
Bright Zhao
Re: How to set tinc not to forward Subnet learned from other nodes?
Guus Sliepen
Re: How to set tinc not to forward Subnet learned from other nodes?
Bright Zhao
The reconnect timer can be adjusted in 1.0.31?
Bright Zhao
Re: The reconnect timer can be adjusted in 1.0.31?
Guus Sliepen
Re: The reconnect timer can be adjusted in 1.0.31?
Bright Zhao
Re: The reconnect timer can be adjusted in 1.0.31?
Guus Sliepen
Re: The reconnect timer can be adjusted in 1.0.31?
Bright Zhao
Re: The reconnect timer can be adjusted in 1.0.31?
Guus Sliepen
Tinc encryption with intermediate hosts
Jan Ernsting
Re: Tinc encryption with intermediate hosts
Guus Sliepen
tincd 1.0.26 terminates with. "Name for tinc daemon required!"
Lorenz Wenner
Re: tincd 1.0.26 terminates with. "Name for tinc daemon required!"
Guus Sliepen
/usr/sbin/tinc --net=pluto dump edges
Perry Couprie
Tinc VPN for unjailbroken iOS 9+
Paul Chobert
Re: Tinc VPN for unjailbroken iOS 9+
Bright Zhao
Re: Tinc VPN for unjailbroken iOS 9+
Ryan Mounce
Re: Tinc VPN for unjailbroken iOS 9+
Paul Chobert
How to block tinc node advertise it's neighbor/edge/subnet info to another node?
Bright Zhao
Re: How to block tinc node advertise it's neighbor/edge/subnet info to another node?
Raul Dias
Re: How to block tinc node advertise it's neighbor/edge/subnet info to another node?
Bright Zhao
Re: How to block tinc node advertise it's neighbor/edge/subnet info to another node?
Raul Dias
What's the possible cause of UDP probe failure?
Bright Zhao
Some tinc clatifications
Alessandro Briosi
RE: Some tinc clatifications
Matthew Nichols
Re: Some tinc clatifications
Alessandro Briosi
Re: Some tinc clatifications
Guus Sliepen
Re: Some tinc clatifications
Alessandro Briosi
Re: Some tinc clatifications
Azul
Can't use proxy after client upgrade
Nikolaus Rath
Re: Can't use proxy after client upgrade
Guus Sliepen
Re: Can't use proxy after client upgrade
Nikolaus Rath
Re: Can't use proxy after client upgrade
Guus Sliepen
Re: Can't use proxy after client upgrade
Nikolaus Rath
Re: Can't use proxy after client upgrade
Nikolaus Rath
Re: Can't use proxy after client upgrade
Guus Sliepen
Are there any known issues in 1.1pre14?
Nirmal Thacker
Significance of port 655?
Nirmal Thacker
Re: Significance of port 655?
Guus Sliepen
Re: Significance of port 655?
Nirmal Thacker
Re: Significance of port 655?
Guus Sliepen
How to diagnostic UDP discovery failed situation
Bright Zhao
Re: How to diagnostic UDP discovery failed situation
Bright Zhao
Re: How to diagnostic UDP discovery failed situation
Guus Sliepen
Why sometimes the MTU discovery by UDP never get a response?
Bright Zhao
Reliability between TCPonly and UDP for tinc?
Bright Zhao
Re: Reliability between TCPonly and UDP for tinc?
hvjunk
Re: Reliability between TCPonly and UDP for tinc?
Bright Zhao
Re: Reliability between TCPonly and UDP for tinc?
hvjunk
Re: Reliability between TCPonly and UDP for tinc?
Bright Zhao
Segfault with 1.1
Keith
Tinc still run on single core of CPU?
Bright Zhao
I've stumbled across weird chain of multiple failures
Sergey Frolov
Cache of the the unreachable nodes cause un-optimized route?
Bright Zhao
Re: Cache of the the unreachable nodes cause un-optimized route?
Saverio Proto
Replacing of non-alphanumeric chars in Name can be confusing
Niklas Hambüchen
Re: Replacing of non-alphanumeric chars in Name can be confusing
Guus Sliepen
How can I resolve the "abc (x.x.x.x port 655) could not flush for 14 seconds (15846 bytes remaining)"
Bright Zhao
Re: How can I resolve the "abc (x.x.x.x port 655) could not flush for 14 seconds (15846 bytes remaining)"
Guus Sliepen
What/why this event happens: Can't write to Linux tun/tap device (tun mode) /dev/net/tun: Input/output error
Bright Zhao
Re: What/why this event happens: Can't write to Linux tun/tap device (tun mode) /dev/net/tun: Input/output error
Bright Zhao
Re: What/why this event happens: Can't write to Linux tun/tap device (tun mode) /dev/net/tun: Input/output error
Guus Sliepen
Re: What/why this event happens: Can't write to Linux tun/tap device (tun mode) /dev/net/tun: Input/output error
Bright Zhao
Re: What/why this event happens: Can't write to Linux tun/tap device (tun mode) /dev/net/tun: Input/output error
Guus Sliepen
Does the INT signal will force the tinc to re-read the tinc.conf file
Bright Zhao
Re: Does the INT signal will force the tinc to re-read the tinc.conf file
Guus Sliepen
How to improve/resolve the Flushing xxx bytes to node would block?
Bright Zhao
Advertising a Public IP address
Keith Whyte
Re: Advertising a Public IP address
hvjunk
Re: Advertising a Public IP address
Keith Whyte
Re: Advertising a Public IP address
David Nicol
Re: Advertising a Public IP address
Keith Whyte
Re: Advertising a Public IP address
Guus Sliepen
Re: Advertising a Public IP address
Keith Whyte
How can I change the speed of tun interface?
Bright Zhao
Re: How can I change the speed of tun interface?
Guus Sliepen
Any speed limit suggestion for tinc?
Bright Zhao
Any way to set the subnet/suggest of invitation?
Martin Eskdale Moen
Re: Any way to set the subnet/suggest of invitation?
Guus Sliepen
Improving packets/sec and data rate - v1.0.24
Jared Ledvina
Re: Improving packets/sec and data rate - v1.0.24
Jared Ledvina
Re: Improving packets/sec and data rate - v1.0.24
Martin Eskdale Moen
Re: Improving packets/sec and data rate - v1.0.24
Niklas Hambüchen
Re: Improving packets/sec and data rate - v1.0.24
Jared Ledvina
Re: Improving packets/sec and data rate - v1.0.24
Niklas Hambüchen
Re: Improving packets/sec and data rate - v1.0.24
Jared Ledvina
Re: Improving packets/sec and data rate - v1.0.24
Naemr .
Re: Improving packets/sec and data rate - v1.0.24
Martin Eskdale Moen
What's the weight means in the dump of edge info from USR2?
Bright Zhao
Re: What's the weight means in the dump of edge info from USR2?
Guus Sliepen
Re: What's the weight means in the dump of edge info from USR2?
Bright Zhao
Re: What's the weight means in the dump of edge info from USR2?
Guus Sliepen
Re: What's the weight means in the dump of edge info from USR2?
Bright Zhao
tinc to create VPN between cluster nodes (at different datacenters) for High Availability
John Griessen
Re: tinc to create VPN between cluster nodes (at different datacenters) for High Availability
Guus Sliepen
Re: tinc to create VPN between cluster nodes (at different datacenters) for High Availability
John Griessen
If two identical host get up, what will happen?
Bright Zhao
Re: If two identical host get up, what will happen?
Guus Sliepen
Re: If two identical host get up, what will happen?
Azul
Re: If two identical host get up, what will happen?
Bright Zhao
Re: If two identical host get up, what will happen?
Guus Sliepen
Show the subnets learnt and update configuration without reset?
Bright Zhao
RE: Show the subnets learnt and update configuration without reset?
Matthew Nichols
Re: Show the subnets learnt and update configuration without reset?
Bright Zhao
Subnet authority and trust
Parke
Re: Subnet authority and trust
Sven-Haegar Koch
Re: Subnet authority and trust
Etienne Dechamps
How tinc route traffic when two subnets are identical?
Bright Zhao
Re: How tinc route traffic when two subnets are identical?
Lars Kruse
Re: How tinc route traffic when two subnets are identical?
Pierre Emeriaud
Re: How tinc route traffic when two subnets are identical?
Guus Sliepen
Re: How tinc route traffic when two subnets are identical?
Dave Warren
Re: How tinc route traffic when two subnets are identical?
Guus Sliepen
Re: How tinc route traffic when two subnets are identical?
Sven-Haegar Koch
Different UDP and TCP ports?
Peter Whisker
Re: Different UDP and TCP ports?
Guus Sliepen
Re: Different UDP and TCP ports?
Peter Whisker
Re: Different UDP and TCP ports?
Ivo Smits
Multi tenancy setup by Tinc?
Bright Zhao
Re: Multi tenancy setup by Tinc?
Guus Sliepen
Re: Multi tenancy setup by Tinc?
Bright Zhao
Re: Multi tenancy setup by Tinc?
Guus Sliepen
Multiple default gateway from tinc node
Bright Zhao
Multiple default gateway from tinc node
Bright Zhao
Re: Multiple default gateway from tinc node
Lars Kruse
Re: Multiple default gateway from tinc node
Bright Zhao
Re: Multiple default gateway from tinc node
Guus Sliepen
Re: Multiple default gateway from tinc node
Bright Zhao
Re: Multiple default gateway from tinc node
Narcissus Emi
Re: Multiple default gateway from tinc node
Lars Kruse
Re: Multiple default gateway from tinc node
Bright Zhao
Re: Multiple default gateway from tinc node
Bright Zhao
Re: Multiple default gateway from tinc node
Lars Kruse
Re: Multiple default gateway from tinc node
Guus Sliepen
Re: Multiple default gateway from tinc node
Bright Zhao
Re: Multiple default gateway from tinc node
Guus Sliepen
Re: Multiple default gateway from tinc node
Bright Zhao
How to set Subnet in a node which act as both server and client role?
Bright Zhao
Re: How to set Subnet in a node which act as both server and client role?
Etienne Dechamps
Re: How to set Subnet in a node which act as both server and client role?
Bright Zhao
Re: How to set Subnet in a node which act as both server and client role?
Bright Zhao
Re: How to set Subnet in a node which act as both server and client role?
Etienne Dechamps
Re: How to set Subnet in a node which act as both server and client role?
Bright Zhao
Re: How to set Subnet in a node which act as both server and client role?
Etienne Dechamps
Re: How to set Subnet in a node which act as both server and client role?
LowEel
Re: How to set Subnet in a node which act as both server and client role?
Bright Zhao
Re: How to set Subnet in a node which act as both server and client role?
LowEel
Why host-up script triggered even not ConnectTo?
Bright Zhao
Re: Why host-up script triggered even not ConnectTo?
Narcissus Emi
Re: Why host-up script triggered even not ConnectTo?
Bright Zhao
Re: Why host-up script triggered even not ConnectTo?
Narcissus Emi
Re: Why host-up script triggered even not ConnectTo?
Narcissus Emi
Re: Why host-up script triggered even not ConnectTo?
Bright Zhao
Re: Why host-up script triggered even not ConnectTo?
Narcissus Emi
Re: Why host-up script triggered even not ConnectTo?
Bright Zhao
Concept clarification between multiple ConnecTo and multiple netname
Bright Zhao
Re: Concept clarification between multiple ConnecTo and multiple netname
Etienne Dechamps
Re: Concept clarification between multiple ConnecTo and multiple netname
Bright Zhao
Re: Concept clarification between multiple ConnecTo and multiple netname
Etienne Dechamps
Re: Concept clarification between multiple ConnecTo and multiple netname
LowEel
Upcoming laws and the state of privacy in Europe?
Martin Eskdale Moen
Re: Upcoming laws and the state of privacy in Europe?
Guus Sliepen
Re: Upcoming laws and the state of privacy in Europe?
Loweel
Earlier messages
Later messages