Hi Nithin! We think that Zsolt have found the problem, which is a missing declaration of the watchdog timer in the platforms/iris/platform.h file. I have committed a fix to the SVN repository. Can you please verify that this fixes BLIP on the IRIS (does not need the trick of plugging in the IRIS to the MIB520 after the pC was started).
Best, Miklos On Mon, Aug 30, 2010 at 3:59 PM, nithin k n <[email protected]> wrote: > i got the problem solved by the trick of Zsolt , > > Thanks for all the support. > > Cheer, > Nithin keen > > On Mon, Aug 30, 2010 at 6:49 PM, nithin k n <[email protected]> wrote: >> >> hi ! did the same trick of starting the driver(for IPBaseStation in iris) >> works everytime for you or that worked only the 1st time >? .. >> >> Regards >> Nithin keen >> >> ---------- Forwarded message ---------- >> From: nithin k n <[email protected]> >> Date: Mon, Aug 30, 2010 at 6:47 PM >> Subject: Re: [Tinyos-help] Blip on IRIS reset problem >> To: Miklos Maroti <[email protected]> >> >> >> IS THE SAME TRICK STILL WORKING FOR HIM ? OR THAT WORKED ONLY ONCE IN THE >> FIRST TIME > ? >> >> REGARDS >> NITHIN KEEN >> >> On Mon, Aug 30, 2010 at 6:25 PM, Miklos Maroti <[email protected]> >> wrote: >>> >>> Hi! >>> >>> This is where the original post of Zsolt comes in. You should start >>> the PC with the MIB520 connected and the IRIS removed, and while it is >>> running then connect the IRIS mote to the mib520, that worked for him >>> and we have no idea what is going on. Why a simple reset would not >>> result in the same behaviour. >>> >>> Miklos >>> >>> On Mon, Aug 30, 2010 at 2:52 PM, nithin k n <[email protected]> >>> wrote: >>> > HI , I did install the new version of tinyos, and everything worked >>> > except a >>> > problem while starting the base station driver , i burnt a mote with >>> > UDPEcho >>> > and other with IPBaseStation . the problem is in starting the driver. >>> > >>> > check out the screenshot attached which says the problem. >>> > >>> > Regards, >>> > Nithin keen >>> > >>> > On Mon, Aug 30, 2010 at 1:14 PM, Miklos Maroti >>> > <[email protected]> >>> > wrote: >>> >> >>> >> Hi! >>> >> >>> >> Use the latest SVN vesrion of tinyos, not the one you have installed >>> >> from tar/rpm. >>> >> >>> >> Miklos >>> >> >>> >> On Mon, Aug 30, 2010 at 6:30 AM, nithin k n <[email protected]> >>> >> wrote: >>> >> > attached screenshots supports the problem statement what i reffered >>> >> > to... >>> >> > >>> >> > ---------- Forwarded message ---------- >>> >> > From: nithin k n <[email protected]> >>> >> > Date: Mon, Aug 30, 2010 at 9:53 AM >>> >> > Subject: Re: [Tinyos-help] Blip on IRIS reset problem >>> >> > To: [email protected], >>> >> > [email protected], >>> >> > [email protected], Miklos Maroti >>> >> > <[email protected]> >>> >> > >>> >> > >>> >> > HI ALL ... >>> >> > HI Zsolt , in my case the official IPBaseStation is itself >>> >> > not >>> >> > gettin >>> >> > installed. >>> >> > when i give "make iris install mib520,/dev/ttyUSB0" the errors >>> >> > appear >>> >> > related to cc2420 interfaces and wirings associated with >>> >> > BaseStationP.nc >>> >> > , >>> >> > like in CC2420Config and CC2420ControlC. >>> >> > >>> >> > can u suggest me what should i do? i thought like i should go for >>> >> > making >>> >> > changes in BaseStationp.nc code , (i.e., changing cc2420's >>> >> > interfaces >>> >> > and >>> >> > wirings to rf230's interfaces and wirings) BECAUSE, IRIS XM2110 >>> >> > DOESN'T >>> >> > HAS >>> >> > CC2420, RATHER IT IS WITH RF230 RADIO. >>> >> > If you think its some other way to the solution, then please send >>> >> > me >>> >> > the >>> >> > IPBaseStation code (/opt/tinyos-2.x/apps/IPBaseStation) , atleast >>> >> > I'll >>> >> > check >>> >> > it. >>> >> > >>> >> > Regards, >>> >> > Nithin keen >>> >> > On Sun, Aug 29, 2010 at 2:04 AM, Miklos Maroti >>> >> > <[email protected]> >>> >> > wrote: >>> >> >> >>> >> >> miklos >>> >> >> >>> >> >> >>> >> >> ---------- Forwarded message ---------- >>> >> >> From: Zsolt Szabó <[email protected]> >>> >> >> Date: 2010/8/6 >>> >> >> Subject: [Tinyos-help] Blip on IRIS reset problem >>> >> >> To: [email protected] >>> >> >> >>> >> >> >>> >> >> Hi all. >>> >> >> >>> >> >> I managed to get the Iris mote to work with the IPBaseStation and >>> >> >> blip >>> >> >> driver, but quite a tricky way. I am using a mib520CA programmer >>> >> >> for >>> >> >> communication interface. When i plug the programmer in and attach >>> >> >> the >>> >> >> mote onto it the led2 will light. But when starting the driver on >>> >> >> pc >>> >> >> the led light goes off, or even before all flashes up then go off. >>> >> >> After this using the programmer's reset switch does not seem to >>> >> >> help, >>> >> >> just detacthing and reattaching the mote. In this case the led2 >>> >> >> turns >>> >> >> on as default. I even tried doing this with disabling all the leds >>> >> >> and >>> >> >> just enable one specific led in the Boot.booted event. I always got >>> >> >> the same result. After strarting blip driver, the mote halts, that >>> >> >> means it does not reboot itself, and i can't do that either >>> >> >> manually >>> >> >> using reset switch. Now the tricky part. If i don't attach the mote >>> >> >> to >>> >> >> the programmer but start the blip driver on pc that tries to >>> >> >> iniciate >>> >> >> communication i wait for 1 or sec while the driver tries to >>> >> >> initiate >>> >> >> communication with the mote. Then i attach the mote and the blip is >>> >> >> functioning properly. I can even login via telnet onto the mote and >>> >> >> if >>> >> >> i want to i can even reset the device using the programmer's reset >>> >> >> switch. >>> >> >> What can be so spoiled in the IPBaseStation that the mote does not >>> >> >> accept even the hardware reset if the first (standard) case? >>> >> >> The phenomenon can be reproduced using unmodified, official tinyos >>> >> >> app >>> >> >> IPBaseStation and blip driver. >>> >> >> Have someone experiancing this reset problem? Does anybody have >>> >> >> suggestions for solving this issue? >>> >> >> >>> >> >> Regards >>> >> >> Zsolt >>> >> >> >>> >> >> _______________________________________________ >>> >> >> Tinyos-help mailing list >>> >> >> [email protected] >>> >> >> >>> >> >> >>> >> >> https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help >>> >> > >>> >> > >>> >> > >>> > >>> > >> >> > > _______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
