Mphillips;574077 Wrote: > I have done all the switching of cables and channels and yes it is at > the preamp level. My first thought was that one of my power amps was > bad. Not the case. This was the point I reached before I tried the > headphone output. What is confusing to me is that all my other sources > sound fine. The sb3 works just fine. Input level to the pre-amp does > not seem to be the issue. I can lover the output of the touch and the > distortion is still there. What else can be present at the output of > the touch that can be causing this compatibility with my pre? My hi-fi > is an active Linn kit.
I know - similar to mine, hence my interest! The thing that baffles me is that you are getting distortion on the same Kairn output channel, no matter which SB output is connected to it. But other sources are OK... What happens if you only connect the Left or Right channel of the SB? -- Phil Leigh You want to see the signal path BEFORE it gets onto a CD/vinyl...it ain't what you'd call minimal... Touch(wired/XP) - TACT 2.2X (Linear PSU) + Good Vibrations S/W - MF Triplethreat(Audiocom full mods) - Linn 5103 - Aktiv 5.1 system (6x LK140's, ESPEK/TRIKAN/KATAN/SEIZMIK 10.5), Pekin Tuner, Townsend Supertweeters, Blue Jeans Digital,Kimber Speaker & Chord Interconnect cables Kitchen Boom, Outdoors: SB Radio, Harmony One remote for everything. ------------------------------------------------------------------------ Phil Leigh's Profile: http://forums.slimdevices.com/member.php?userid=85 View this thread: http://forums.slimdevices.com/showthread.php?t=81708 _______________________________________________ Touch mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/touch
