By default the T2-301 is already set to 144.390 but here are the command syntax's:
SETFREQ ttt.ttt rrr.rrr - Sets the transmit and receive frequencies in MHz, for example SETFREQ 144.390 144.390 to set transmit and receive both to 144.39 MHz. (Note that the receive frequency echoed by the command may not be what was entered; this is a minor glitch that will be fixed in future versions.) SETPOWER pp - Sets the transmit power, from 0 to 99. The scale is non-linear and varies with the supply voltage, and there is some variation from unit to unit, but the following values are guidelines: The above was copied from the ArgentData WIKI: http://wiki.argentdata.com/index.php/T2-301 And yes, DISPLAY should show all the settings. Larry K7YBZ --- In [email protected], "Joe" <weewo...@...> wrote: > > > > --- In [email protected], "Rudy" <benner@> wrote: > > > > SETPOWER and SETFREQ don't echo to the consol. > > > Do you have any idea what the syntax is for these commands. When I enter > SETFREQ, I get "Error". Any other change to SETFREQ such as a ?, I get > invalid command. Did not try SETPOWER. These don't appear to be normal TNC > commands. Incidentally, doesn't DISPLAY produce ALL the commands in the TNC? > > > Tnx, Joe >
