DISPLAY will not show the current settings for SETPOWER and SETFREQ.
--- In [email protected], "k7ybz" <k7...@...> wrote:
>
>
> By default the T2-301 is already set to 144.390 but here are the command
> syntax's:
>
> SETFREQ ttt.ttt rrr.rrr - Sets the transmit and receive frequencies in MHz,
> for example SETFREQ 144.390 144.390 to set transmit and receive both to
> 144.39 MHz. (Note that the receive frequency echoed by the command may not be
> what was entered; this is a minor glitch that will be fixed in future
> versions.)
>
> SETPOWER pp - Sets the transmit power, from 0 to 99. The scale is non-linear
> and varies with the supply voltage, and there is some variation from unit to
> unit, but the following values are guidelines:
>
> The above was copied from the ArgentData WIKI:
> http://wiki.argentdata.com/index.php/T2-301
>
> And yes, DISPLAY should show all the settings.
>
> Larry
> K7YBZ
>
> --- In [email protected], "Joe" <weewoods@> wrote:
> >
> >
> >
> > --- In [email protected], "Rudy" <benner@> wrote:
> > >
> > > SETPOWER and SETFREQ don't echo to the consol.
> > >
> > Do you have any idea what the syntax is for these commands. When I enter
> > SETFREQ, I get "Error". Any other change to SETFREQ such as a ?, I get
> > invalid command. Did not try SETPOWER. These don't appear to be normal
> > TNC commands. Incidentally, doesn't DISPLAY produce ALL the commands in
> > the TNC?
> >
> > Tnx, Joe
> >
>
