I vaguely remember something to that effect, but was not certain.
--- In [email protected], "Rudy" <ben...@...> wrote:
>
> DISPLAY will not show the current settings for SETPOWER and SETFREQ.
>
> --- In [email protected], "k7ybz" <k7ybz@> wrote:
> >
> >
> > By default the T2-301 is already set to 144.390 but here are the command
> > syntax's:
> >
> > SETFREQ ttt.ttt rrr.rrr - Sets the transmit and receive frequencies in MHz,
> > for example SETFREQ 144.390 144.390 to set transmit and receive both to
> > 144.39 MHz. (Note that the receive frequency echoed by the command may not
> > be what was entered; this is a minor glitch that will be fixed in future
> > versions.)
> >
> > SETPOWER pp - Sets the transmit power, from 0 to 99. The scale is
> > non-linear and varies with the supply voltage, and there is some variation
> > from unit to unit, but the following values are guidelines:
> >
> > The above was copied from the ArgentData WIKI:
> > http://wiki.argentdata.com/index.php/T2-301
> >
> > And yes, DISPLAY should show all the settings.
> >
> > Larry
> > K7YBZ
> >
> > --- In [email protected], "Joe" <weewoods@> wrote:
> > >
> > >
> > >
> > > --- In [email protected], "Rudy" <benner@> wrote:
> > > >
> > > > SETPOWER and SETFREQ don't echo to the consol.
> > > >
> > > Do you have any idea what the syntax is for these commands. When I enter
> > > SETFREQ, I get "Error". Any other change to SETFREQ such as a ?, I get
> > > invalid command. Did not try SETPOWER. These don't appear to be normal
> > > TNC commands. Incidentally, doesn't DISPLAY produce ALL the commands in
> > > the TNC?
> > >
> > > Tnx, Joe
> > >
> >
>
