I thot the thing that triggered the FMI mode was the pinx to ground with the 8.2K resistor at the side port??
--- In [email protected], Al Waschka <awasc...@...> wrote: > > I believe the answer is no, you must use the power from the mount in order to > enable the fleet management interface which causes the 350 to output location > messages to the OT2 and receives POI data from the OT2. > > > > Al K5TAN > > > --- On Tue, 4/6/10, captc...@... <captc...@...> wrote: > > > From: captc...@... <captc...@...> > Subject: [tracker2] powering the nuvi 350 > To: [email protected] > Date: Tuesday, April 6, 2010, 6:28 PM > > > Sorry for all the basic questions..just don't want to mess anything up. > > The info I have read on this site says the Nuvi 350 must be powered > externally in order to work with the FMI interface. > > Can I use the side minib connector for both the data and power connection by > making up a cable? I dont have a powered mount for the nuvi. The side > connector is where I currently plug in the car charger/power connector. > > Thanks > > Curt > > > > ------------------------------------ > > Yahoo! Groups Links >
