Bob, I have an '84 42 aft cabin, (42 SE II). I don't know the configuration of you 42, but in mine the Genset is in the engine room on the port side near the forward bulkhead. The water heater is outboard of the Onan. Changing the water heater was a bear and while that was going on I figured that if I ever change out the genset, I would make the stairs, those going down to the galley from the salon, open. Or at least remove the stairs during the genset swap. My genset is right next to the under side of the stairs. Is yours similar? Have you considered this method? DavidO
>________________________________ > From: COPTERBC via UnifliteWorld <[email protected]> >To: [email protected] >Sent: Sunday, August 3, 2014 12:27 PM >Subject: [UnifliteWorld] Onan Gen. > > > >Has anyone had their gen. set replaced. I have a 7.5kW Onan MDJE that is flat worn out and am going to have a Yanmar 7 kW installed. I have a 42 ft. aft cabin and it's going to be a real bear to get it replaced. Any thoughts on this and approximately how long did it take? > >Thanks, > >Bob C. -- >You received this message because you are subscribed to the Google Groups >"UnifliteWorld" group. >To unsubscribe from this group and stop receiving emails from it, send an >email to [email protected]. >To post to this group, send email to [email protected]. >Visit this group at http://groups.google.com/group/unifliteworld. >For more options, visit https://groups.google.com/d/optout. > > > -- You received this message because you are subscribed to the Google Groups "UnifliteWorld" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/unifliteworld. For more options, visit https://groups.google.com/d/optout.
