There is the isue whereone tunner might be connected to an LNB on a rotor and 
another to a fixed. Knowing how the tunner can tune
wouldn't help then.

----- Original Message ----- 
From: "Klaus Schmidinger" <>
To: <>
Sent: Thursday, October 29, 2009 1:13 AM
Subject: Re: [vdr] Restricting a particular dvb card from tuning to channels 
with a selected modulation

> On 10/28/09 23:15, Petri Helin wrote:
> > Hi,
> >
> > I have an USB DVB-C card (Reddo dvb-c, actually a relabelled Tongshi
> > box), which works very well with the current Linux driver excluding
> > channels with QAM-256 modulation. Would it be easy to check
> > FE_CAN_QAM_256 in vdr before trying to use a device to tune to a
> > particular channel? In such a case I could deactivate FE_CAN_QAM_256 in
> > the drivers. I am using VDR 1.7.9, if it makes a difference.
> Checking the frontend capabilities is certainly the right thing to do,
> and I will see that this gets implemented.
> Klaus
> _______________________________________________
> vdr mailing list

vdr mailing list

Reply via email to